Coachbuilder OE Replacement Steering Kit | Fits Toyota Tundra 2007–2021 Including TRD Pro | Ekstrom Design

The Coachbuilder OE Replacement Steering Kit replaces the factory outer tie rod ends on 2007–2021 Toyota Tundras — including TRD Pro — with 7075-T6 billet aluminum arms and 7/8" forged 4130 chromoly rod ends. Stock tie rod ends are a known weak point once a Tundra runs bigger tires, a lift, or regular trail miles: they flex, wear, and bring bump steer and uneven tire wear along with them. This Toyota Tundra steering upgrade bolts on in place of the originals with no modification, adds up to 30% more steering travel, and keeps toe stable as the suspension cycles. It works with factory, CST, and Maxtrac spindles as well as ReadyLift 4", 6", and 8" and Rough Country 6" lift kits.

Features

• 7075-T6 billet aluminum arms with a hard anodized finish
• 7/8" forged 4130 chromoly rod ends with PTFE liners — rebuildable, not throwaway
• Increases steering travel by up to 30% for more front-end articulation
• Cuts bump steer and the uneven tire wear that follows it
• 304 stainless steel misalignment spacers, rubber grease boots, and hardened hardware
• Clean bolt-on install in 45–60 minutes, no modifications required
• Designed and machined in the USA

Check wheel fitment before ordering: on factory spindles, 17" wheels need +25mm offset or less and 18" wheels need +35mm or less, while 20" and larger clear at any offset; aftermarket spindles need 18" wheels at 0mm or less or 20" at +25mm or less. Plan an alignment afterward to Coachbuilder’s published specs. Running a long travel kit instead of spindles? Step up to the Coachbuilder +2.50" Long Travel Steering Kit. And when the joints eventually wear, the Steering Kit Rebuild Kit renews them in place — browse the full tie rod and steering lineup or all Coachbuilder upgrades.