INEOS Grenadier: PowerVault™ Utility Hub R2

The PowerVault Utility Hub R2 turns your INEOS Grenadier's factory DTP rooftop outlet into a full charging station you can stick anywhere on the truck. It plugs into an EXT port through the included DTP-to-Anderson cable, then delivers laptop-grade USB-C, fast USB-A, and a 12V socket from a rugged, weatherproof enclosure. Four industrial magnets let you snap it to a door, swing-out, or body panel with no drilling and no permanent wiring.

Key Features

• Two USB-C ports rated 65W each — enough to charge a MacBook or fast-charge phones and tablets in the field
• Two USB-A ports rated 22.5W each for quick top-ups of legacy devices
• One 12V cigarette-lighter-style socket for fridges, air pumps, and other 12V accessories
• Integrated flashlight with an on/off switch for camp and after-dark tasks
• Four industrial-strength magnets mount it to any steel surface and reposition instantly
• Weatherproof enclosure with IP65-rated connectors shrugs off dust, mud, and rain
• Runs entirely off factory power — no drilling, no splicing, no permanent wiring

Fitment & Compatibility

Built for the INEOS Grenadier (Station Wagon and Quartermaster) with factory DTP rooftop power. The included 1-meter DTP-to-Anderson cable plugs into an EXT2 or EXT3 outlet, so no vehicle-side wiring changes are needed. Because it draws from the factory DTP circuit, total available current is governed by the vehicle-side DTP fuse rather than any modification to your rig.

Specifications

What's in the Box

• 1x PowerVault Utility Hub R2 enclosure with all outputs
• 1x 1-meter DTP-to-Anderson power cable

Frequently Asked Questions

How does the PowerVault get power on the Grenadier?
It connects to a factory DTP rooftop outlet (EXT2 or EXT3) using the included 1-meter DTP-to-Anderson cable. There is no cutting, splicing, or permanent wiring — the connection is fully reversible.

Can it charge a laptop?
Yes. Each of the two USB-C ports delivers up to 65W, which is enough to power a MacBook or other USB-C PD laptops, plus fast-charge phones and tablets.

How is it mounted?
Four industrial-strength magnets hold it to any steel surface — a door, a rear swing-out, or a body panel — and let you reposition it in seconds with no drilling.

Is it waterproof?
The enclosure is weatherproof and uses IP65-rated connectors, so it handles dust, mud, and rain. It is not rated for submersion, so avoid dunking it.

What limits how much power I can pull?
The PowerVault itself needs no additional fuse. Total available current is set by the vehicle-side DTP fuse on the EXT port you connect to.

Do I need any extra cables or adapters?
No. The DTP-to-Anderson cable is included, so it is plug-and-play. If you want to reach a farther port you can pair it with our DTP-06-2S to Anderson SB50 cable.