Adjustable Frame Panhard Mount - Outside 1.75 Inch

The Artec Industries Adjustable Frame Panhard Mount anchors the frame end of a custom track bar on a 3-link or 4-link build. This Outside 1.75" version is sized for joints with a 1.75" mounting width — 3/4" and 7/8"x3/4" rod ends running high-misalignment spacers — and it puts three mounting positions at your disposal, dropping the bar 2", 3.25", or 4.5" below the frame so you can keep the track bar flat and matched to your drag link at ride height. Built from 1/4" boxed steel plate, it welds on as a permanent, structural frame anchor.

Features

• 1/4" boxed steel plate, CNC laser cut and bent for precise fit-up
• 1.75" outside mounting width with 9/16" bolt holes
• Fits 3/4" and 7/8"x3/4" rod ends with high-misalignment spacers
• Three mounting positions at 2", 3.25", and 4.5" of drop from the frame
• Works on any 3-link or 4-link suspension that runs a track bar
• Weld-on construction; made in the USA

Measure your rod end plus spacer stack and confirm it comes to 1.75" across before ordering, and note the install typically means removing the OEM track bar mount, prepping the frame, and welding — follow up with an alignment and re-torque the bolt after the first 50 miles. Pair it with the axle-side Adjustable Panhard Mount for Axle and finish the joint with 7/8" High Misalignment Spacers. Related hardware lives in track bar brackets and frame brackets.