Bushing Kit - 2" with Sleeve

The Artec Industries 2" Bushing Kit with Sleeve is a heavy-duty polyurethane pivot for fabrication and suspension work. It pairs a machined seamless-DOM outer sleeve with a zinc-plated inner sleeve and Daystar polyurethane bushings, giving link brackets, motor mounts, and custom joints a serviceable pivot that will not crush or split under load. The 2" overall width is sized to fit all of Artec's large link brackets, and the inner sleeve comes in two bore sizes to match your bolt.

Features

• Outer sleeve machined from 2.0" OD seamless DOM tube with a 0.250" wall
• Thick 0.250" wall resists splitting under hard cycling and impacts
• Threaded for a 0.250" grease zerk so the bushings stay lubricated
• 2" overall width fits all Artec large link brackets
• Zinc-plated inner sleeve in 7/16" or 1/2" bore
• Daystar polyurethane bushing halves for a controlled, quiet pivot

This is a universal fabrication component, not a vehicle-specific part — the outer sleeve welds into your bracket or tube, so professional welding is part of the job. Pick the 7/16" or 1/2" bore to match your bolt, and grab the Daystar bushing replacement when the poly eventually wears. Wider joints are covered by the 2.63" kit and 3.0" kit; see the full bushings collection for the rest.