Bushing Kit - 3.0" with Sleeve
Warranty Information
Vendor warranty summary
Artec Industries Warranty
At a glance: Limited lifetime warranty against defects in material or workmanship
This is Artec Industries's warranty, not an NVMOS policy. We've summarized it in plain English to save you a search. The manufacturer's official terms always govern and can change without notice. Last reviewed on nvmos.com: October 4, 2026.
Coverage by product
| Product or component | Coverage |
|---|---|
| Artec Industries products | Limited lifetime, starting on delivery date |
| Returns of powder-coated products | Not returnable (manufacturer refund policy) |
What's covered
- Defects in material or workmanship for products bought, installed and used for their intended purpose
- Artec repairs or replaces a defective product at no charge (method at Artec's discretion)
What's not covered
- Misuse, abuse or neglect
- Improper installation
- Incorrect maintenance
How to make a Artec Industries warranty claim
- Call Artec at 855-278-3299 (Mon-Fri 9am-5pm MDT) to describe the issue
- Get an RMA number before shipping anything; packages without one are refused
Artec Industries contact: Phone: 855-278-3299 · Claim page / support
Bought it from NVMOS? Start with us.
Have your order number and a few photos of the issue ready, then call real humans at (920) 249-7744 or send us a message. We'll tell you whether the claim goes through us or straight to Artec Industries, and help it along either way.
Shop Artec Industries at NVMOS
Under Tailgate Plate - Aluminum, for Jeep Wrangler TJ/LJ 1997-2006
Coil Correction Plate for Jeep TJ Front Coil Springs (Pair)
Front and Rear Truss Package for Jeep Gladiator JT 2020+ (Free Front Axle Skid)
See all Artec Industries products, lead times and FAQs →
Disclaimer: The information on this page describes Artec Industries's own warranty policy. It is not a warranty offered by NVMOS (No Visible Means of Support LLC). Manufacturers update their terms at any time; we review these pages periodically, but the manufacturer's current official policy is the one that applies to your claim. Source: Artec Industries official warranty information. Last updated on nvmos.com: October 4, 2026. See our return policy for NVMOS's own terms.
About the brand
Artec Industries builds axle trusses, swap kits, suspension brackets and armor in North Salt Lake, Utah. NVMOS carries Artec reinforcements, control arms, skids, bumpers, fenders and battery mounts for Jeep, Toyota and Super Duty axles. It's for rigs running big tires and lockers that need housings and brackets that stay straight.
Based in: North Salt Lake, Utah · Made in: USA — most parts built in-house in Utah · Founded: 2003 · Lead time: Artec in-stock orders: 2–4 business days; NVMOS stock: 24–48 hours
Shop all 472 Artec IndustriesWarrantyAll brands
Warranty terms are set by Artec Industries, not NVMOS, and can change. Bought from us? Call (920) 249-7744 and we'll handle the claim with the brand.
The Artec Industries 3.0" Bushing Kit with Sleeve is the widest of Artec's weld-in poly pivot kits — a machined seamless-DOM outer sleeve, zinc-plated inner sleeve, and Daystar polyurethane bushings built for suspension links, motor and transmission mounts, and custom fabrication. The extra width suits wider brackets and mounts where a 2" or 2.63" joint would leave slop, while the heavy sleeve wall keeps the pivot from splitting no matter how hard the joint cycles.
Features
- Outer sleeve machined from 2.0" OD seamless DOM tube with a .250" wall
- Thick .250" wall resists splitting under load
- 3.0" overall width for wide brackets and mounts
- Zinc-plated inner sleeve with a 9/16" bore, works with 9/16" or 1/2" bolts
- Threaded for a .250" grease zerk — fully serviceable
- Daystar polyurethane bushings for control and longevity
- Made in the USA
This is a universal fabrication component: the 2.0" OD sleeve welds into your bracket or tube, so professional welding is part of the install. Choose by width first — the 2.63" kit matches Artec's large link brackets and the 2" kit handles narrower joints — and keep a Daystar replacement set in mind for down the road. More options live in the bushings collection.
Specifications
Bushing Kit FAQs
What bolt size does it take?
The zinc-plated inner sleeve has a 9/16" bore, sized for a 9/16" bolt — a 1/2" bolt also works through it. Pick your hardware to suit the joint loads on your build.
Do I need to weld it in?
Yes. The 2.0" OD, .250"-wall DOM outer sleeve is made to be welded into your bracket, tube, or mount, so proper welding is required. The thick wall is specifically there so the sleeve does not split or distort during welding or under load.
Can I grease and rebuild it?
Yes on both counts. The sleeve is drilled and threaded for the included .250" grease zerk, so the Daystar polyurethane stays lubricated, and worn bushings can be swapped for fresh Daystar replacements without touching the welded sleeve.
Multi-column
Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!
Financing Available
Buy now, pay later with PayPal Credit — available at checkout.
Contact Us
Have a question? Just send us an e-mail at support@nvmos.com
