The Artec Industries Tube Link Mount Small is a weld-on link tab for 2.0" OD tubing, sized at a 1.75" mounting width for 7/8" rod ends running high-misalignment spacers. Part of Artec's form-and-function bracket line, its tapered profile flows into the tube instead of sticking out like a flat tab, so there is less bracket to snag and the finished link looks like one-off fab work. It is the go-to piece for building your own radius arms and tube links without cutting tabs from scratch.
Features
- Cut from 1/4" boxed steel plate for strength and impact resistance
- Contoured to weld onto 2.0" outside-diameter tubing
- 1.75" mounting width with a 9/16" bolt hole for 7/8" rod ends and misalignment spacers
- Tapered shape blends into the tube with less to hang up on rocks
- Grease-fitting access on top keeps the joint serviceable
- Bottom skid plate shields the rod end without limiting its travel
- Bottom seam left open so you can lay a clean, full weld bead
Verify your tube is 2.0" OD and your joint stack measures 1.75" across before ordering — sold as a single, so count the tabs your link design needs. Complete the joint with 7/8" High Misalignment Spacers, or step up to the Tube Link Mount Large for 1.75" tube and 2.625" cartridge joints. More weld-on hardware lives in our frame brackets and mounts and brackets collections.
Specifications
Tube Link Mount Small (Single) FAQs
What tube and rod-end sizes does it fit?
It is contoured to weld onto 2.0" outside-diameter tubing, and its 1.75" mounting width with a 9/16" bolt hole suits 7/8" rod ends running high-misalignment spacers. Measure your joint plus spacers to confirm the stack comes to 1.75" before you order.
How is it different from the Tube Link Mount Large?
The Small fits 2.0" tube at a 1.75" width for 7/8" rod ends. The Large fits 1.75" tube at a 2.625" width for cartridge joints like Johnny Joints, and can be drilled for 1.25" rod ends. Pick by the tube you are building with and the joint you plan to run.
Is it a bolt-on part?
No — it is a weld-on fabrication tab sold bare, so it needs structural welding and paint or coating afterward. The bottom seam is left clear so you can run a full bead, and it is sold as a single, so order one per link end your design calls for.
Multi-column
Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!
Financing Available
Buy now and pay later with Affirm.
Contact Us
Have a question? Just send us an e-mail at support@nvmos.com
