ORACLE Lighting 60" Double Row LED Truck Tailgate Light Bar

The ORACLE 60" Double Row LED Truck Tailgate Light Bar (Part #3825-504) is a complete rear safety and visibility upgrade for any pickup or work truck. Its double-row design packs 216 total LEDs — 144 red and 72 white — for more than 2X the brightness of a conventional single-row tailgate bar. Running, brake, turn, and reverse functions all run through a simple plug-and-play 4-pin trailer connection, with no drilling required.

Key Features

• Double-row design with 216 total LEDs (144 red + 72 white) for 2X the brightness of single-row bars
• Full function set: running lights, brake lights, sequential turn signals, and reverse lights
• 72 high-power white reverse LEDs activated by a single 12V wire tap
• Plug-and-play 4-pin trailer connection for running, brake, and turn signals
• IP67-rated full silicone enclosure for all-season, all-weather use
• No drilling required — pre-applied 3M VHB adhesive plus included screws and brackets
• Cuttable from the opposite cable end to fit truck beds under 60"

Fitment & Compatibility

Universal fitment for any pickup or work truck with a standard 4-pin trailer light connector and a tailgate width up to 60". Compatible with trucks including the Ford F-150/F-250/F-350, Chevy Silverado, GMC Sierra, Ram 1500/2500/3500, Toyota Tacoma/Tundra, Nissan Titan/Frontier, and more. For beds under 60", the bar can be trimmed from the opposite end of the cable; cutting shortens one side's turn signal, so we recommend leaving the turn signal wires disconnected if the bar is cut.

Specifications

What's in the Box

• (1) ORACLE 60" Double Row LED Tailgate Light Bar
• (4) Screws
• (2) Brackets
• 3M VHB Adhesive Tape (Pre-Applied)
• 12V Reverse Wire Tap
• Online Installation Instructions

Download Install Guide (PDF)

Frequently Asked Questions

Will this fit my truck?
It is a universal design for any pickup or work truck with a standard 4-pin trailer connector and a tailgate width up to 60", including popular models from Ford, Chevy, GMC, Ram, Toyota, and Nissan.

Is drilling required to install it?
No. The bar mounts with pre-applied 3M VHB adhesive and the included screws and brackets, so no drilling is needed.

How does it wire up?
Plug the 4-pin connector into your factory trailer plug for running, brake, and turn signals, then tap the included 12V white wire into your reverse circuit to power the reverse LEDs.

Can I use it on a truck narrower than 60"?
Yes. The bar can be cut from the opposite end of the cable. Cutting shortens one side's turn signal, so ORACLE recommends not connecting the turn signal wires if the bar is trimmed.

Is it weatherproof?
Yes. The full silicone enclosure is IP67-rated for rain, snow, and mud in all-season use, and it is backed by a 1-year warranty.