The Standard Clamp Kit is the bed-rail clamp hardware behind the no-drill install on the Big Days Chase Rack System. These clamps grip the truck's bed side rails and cinch the rack down without putting a single hole in the bed — Big Days pegs the clamp-on install at about five minutes with a 13mm deep socket and a 4mm Allen wrench. Grab this kit to replace clamps that disappeared in a move between trucks, or to keep spare hardware on hand for a rack that comes on and off with the seasons.
Features
- No-drill clamp mounting to the truck bed side rails
- Roughly five-minute installation per Big Days — 13mm deep socket and 4mm Allen wrench
- Clamp-on install listed for Ford, Chevrolet, Ram/Dodge, Nissan, and Jeep beds
- Lets a seasonal rack come off and go back on without fresh hardware
- Small Parts kit — replace worn or lost clamps without re-buying a rack
Fitment: the clamp-on method is what Big Days lists for Ford, Chevrolet, Ram/Dodge, Nissan, and Jeep beds. Trucks with factory deck rails use the Deck Rail Clamp Kit instead, and drilled installs go through the Bolt On Clamp Kit, which mounts with four 3/8" holes. Bed sizing for the rack itself varies by build, so check your truck's bed when you spec the full system.
Small Parts FAQs
Will the Standard Clamp Kit work on my truck?
Big Days lists its no-drill clamp-on install for Ford, Chevrolet, Ram/Dodge, Nissan, and Jeep beds. Trucks with factory deck rail systems mount with the separate Deck Rail Clamp Kit instead, and drilled installations use the Bolt On Clamp Kit. If your bed matches one of the listed clamp-on applications, this is the kit the standard install uses.
Do I have to drill into my bed rails?
No. This kit supports the standard clamp-on method, which grips the bed side rails with no drilling — Big Days puts the install at roughly five minutes using a 13mm deep socket and 4mm Allen wrench. Drilling only comes into play with the separate bolt-on option, which uses four 3/8" holes.
Is this the same clamp hardware that comes with the Chase Rack System?
Yes — the Base Rack ships with clamp hardware for the standard install, and this Small Parts kit is how you replace lost or worn clamps, or keep a spare set for a rack that comes on and off between trips, without buying anything bigger. Deck-rail and bolt-on beds use their own dedicated kits.
Multi-column
Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!
Financing Available
Buy now and pay later with Affirm.
Contact Us
Have a question? Just send us an e-mail at support@nvmos.com
