Prinsu Design Studio Camper Pro Roof Rack - Toyota Tundra CrewMax 2007-2021
Warranty Information
Vendor warranty summary
Prinsu Design Studio Warranty
At a glance: Limited lifetime on Prinsu-made parts for the original owner; hardware 1 year; powder coat not covered
This is Prinsu Design Studio's warranty, not an NVMOS policy. We've summarized it in plain English to save you a search. The manufacturer's official terms always govern and can change without notice. Last reviewed on nvmos.com: October 4, 2026.
Coverage by product
| Product or component | Coverage |
|---|---|
| Prinsu-manufactured racks and parts | Limited lifetime (original retail buyer) |
| Hardware kits | 1 year |
| Powder-coat finish | Not covered |
| Missing parts | Report within 90 days of receipt |
| Other brands sold by Prinsu | Original maker's warranty |
- Original purchaser only — coverage does not transfer if you sell it.
- Keep your NVMOS order confirmation — proof of purchase is required.
What's covered
- Defects in materials and workmanship for as long as the original buyer owns the product
- Prinsu decides whether to repair, replace, refund or give store credit
What's not covered
- Powder-coated finish, cosmetic rust and scratches
- Normal wear and tear
- Accidents, racing or competition use, unlawful vehicle use
- Modifications or unauthorized repairs
- Misuse, neglect, overloading, poor installation or maintenance, or not following instructions
- Damage to the vehicle, cargo or other property
How to make a Prinsu Design Studio warranty claim
- Submit the claim through the online form on prinsu.com/warranty (phone claims are not accepted)
- Include a copy of the original invoice
- Wait for an RMA number before shipping
- Ship to the address given with the RMA, with the RMA number clearly on the box; buyer pays return shipping
- Use tracked, insured shipping because Prinsu isn't responsible for loss in transit
Prinsu Design Studio contact: Phone: (866) 522-0697 · Claim page / support
Bought it from NVMOS? Start with us.
Have your order number and a few photos of the issue ready, then call real humans at (920) 249-7744 or send us a message. We'll tell you whether the claim goes through us or straight to Prinsu Design Studio, and help it along either way.
Shop Prinsu Design Studio at NVMOS
Prinsu Pro Ford Bronco Roof Rack | 2021-2025
5th Gen Toyota 4Runner Prinsu Roof Rack Full Non-Drill | 2010-2024
Ford Bronco Accessory Panel | 2021-2025
See all Prinsu Design Studio products, lead times and FAQs →
Disclaimer: The information on this page describes Prinsu Design Studio's own warranty policy. It is not a warranty offered by NVMOS (No Visible Means of Support LLC). Manufacturers update their terms at any time; we review these pages periodically, but the manufacturer's current official policy is the one that applies to your claim. Source: Prinsu Design Studio official warranty information. Last updated on nvmos.com: October 4, 2026. See our return policy for NVMOS's own terms.
About the brand
Prinsu Design Studio builds low-profile roof racks in Idaho Falls, Idaho. NVMOS carries Original and Prinsu Pro roof racks, top racks for caps and campers, ladders, accessory panels and mounts, with fitments centered on Toyota and reaching Ford, GM, Ram, Nissan, Subaru, Rivian and the Sprinter.
Based in: Idaho Falls, Idaho · Made in: Built in-house in Idaho Falls · Lead time: Original roof racks ~1 week; Prinsu Pro ~5 weeks; accessories 1–2 weeks
Shop all 243 Prinsu Design StudioWarrantyLead timesAll brands
Warranty terms are set by Prinsu Design Studio, not NVMOS, and can change. Bought from us? Call (920) 249-7744 and we'll handle the claim with the brand.
This is the Prinsu Pro rack built for Tundra owners who run an in-cab camper. It keeps the modular Prinsu layout but is shaped to clear the camper, so you can still carry gear on the roof.
The Pro rack uses redesigned crossbars that Prinsu says are 44 percent stronger than before, each with six integrated drop-in points for tie-downs and accessories. Side rails are a two-part design with a bend on top for rigidity and more mounting options, and the mounting feet are recessed and bolt on. Hardware is corrosion-resistant stainless steel, and the rack is powder-coated aluminum. Load capacity is rated at 700 lb dynamic and 1,200 lb static.
Fitment
For the 2nd Gen Toyota Tundra, 2007-2021, in the CrewMax cab configuration only. It is compatible with a 40 in light bar.
Options
Choose a standard wind deflector or a cut-out deflector.
Shipping
Ships free to the lower 48.
Questions before you order?
Fitment questions are easier to settle before the box ships. Call or text Carl & Anton at (920) 249-7744 or use the chat — real humans in Sheboygan, Wisconsin, not a call center.
Complete your Toyota Tundra build
More parts that fit your Toyota Tundra and pair well with this one — matched and ready to install.
$940.00
$416.90
$315.00
$82.80
$184.00
More for your Toyota Tundra
Picked from the 1132 parts we carry for the Toyota Tundra, matched to 2007–2021 model years. Check the years and trim in each title — or call us and we’ll confirm fit.
Specifications
Prinsu Design Studio Camper Pro Roof Rack FAQs
Will it fit a Double Cab or Regular Cab?
No. It only works with the CrewMax cab configuration.
What load can it carry?
700 lb dynamic and 1,200 lb static.
Can I run a light bar?
Yes, it is compatible with a 40 in light bar.
What is the difference between standard and cut-out?
They are wind deflector styles, and the cut-out is the version designed to accommodate the light bar.
Multi-column
Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!
Financing Available
Buy now, pay later with PayPal Credit — available at checkout.
Contact Us
Have a question? Just send us an e-mail at support@nvmos.com
