5th Gen Toyota 4Runner Prinsu Roof Rack Full Non-Drill | 2010-2024
Warranty Information
Vendor warranty summary
Prinsu Design Studio Warranty
At a glance: Limited lifetime on Prinsu-made parts for the original owner; hardware 1 year; powder coat not covered
This is Prinsu Design Studio's warranty, not an NVMOS policy. We've summarized it in plain English to save you a search. The manufacturer's official terms always govern and can change without notice. Last reviewed on nvmos.com: October 4, 2026.
Coverage by product
| Product or component | Coverage |
|---|---|
| Prinsu-manufactured racks and parts | Limited lifetime (original retail buyer) |
| Hardware kits | 1 year |
| Powder-coat finish | Not covered |
| Missing parts | Report within 90 days of receipt |
| Other brands sold by Prinsu | Original maker's warranty |
- Original purchaser only — coverage does not transfer if you sell it.
- Keep your NVMOS order confirmation — proof of purchase is required.
What's covered
- Defects in materials and workmanship for as long as the original buyer owns the product
- Prinsu decides whether to repair, replace, refund or give store credit
What's not covered
- Powder-coated finish, cosmetic rust and scratches
- Normal wear and tear
- Accidents, racing or competition use, unlawful vehicle use
- Modifications or unauthorized repairs
- Misuse, neglect, overloading, poor installation or maintenance, or not following instructions
- Damage to the vehicle, cargo or other property
How to make a Prinsu Design Studio warranty claim
- Submit the claim through the online form on prinsu.com/warranty (phone claims are not accepted)
- Include a copy of the original invoice
- Wait for an RMA number before shipping
- Ship to the address given with the RMA, with the RMA number clearly on the box; buyer pays return shipping
- Use tracked, insured shipping because Prinsu isn't responsible for loss in transit
Prinsu Design Studio contact: Phone: (866) 522-0697 · Claim page / support
Bought it from NVMOS? Start with us.
Have your order number and a few photos of the issue ready, then call real humans at (920) 249-7744 or send us a message. We'll tell you whether the claim goes through us or straight to Prinsu Design Studio, and help it along either way.
Shop Prinsu Design Studio at NVMOS
Prinsu Design Studio Pro Roof Rack - Ford Bronco 4-Door Hardtop 2021-2026
5th Gen Toyota 4Runner Prinsu Roof Rack Full Non-Drill | 2010-2024
Ford Bronco Accessory Panel | 2021-2025
See all Prinsu Design Studio products, lead times and FAQs →
Disclaimer: The information on this page describes Prinsu Design Studio's own warranty policy. It is not a warranty offered by NVMOS (No Visible Means of Support LLC). Manufacturers update their terms at any time; we review these pages periodically, but the manufacturer's current official policy is the one that applies to your claim. Source: Prinsu Design Studio official warranty information. Last updated on nvmos.com: October 4, 2026. See our return policy for NVMOS's own terms.
About the brand
Prinsu Design Studio builds low-profile Prinsu roof racks in Idaho Falls, Idaho. NVMOS carries Original and Prinsu Pro roof racks, top racks for caps and campers, ladders, rack accessories and mounts, with fitments centered on Toyota and reaching Ford, GM, Ram, Nissan, Subaru, Rivian and the Sprinter.
Based in: Idaho Falls, Idaho · Made in: Built in-house in Idaho Falls · Lead time: Original roof racks ~1 week; Prinsu Pro ~5 weeks; accessories 1–2 weeks
Shop all 188 Prinsu Design StudioWarrantyLead timesAll brands
Warranty terms are set by Prinsu Design Studio, not NVMOS, and can change. Bought from us? Call (920) 249-7744 and we'll handle the claim with the brand.
Prinsu Full Roof Rack (Non-Drill) — Toyota 4Runner 5th Gen (2010–2024)
A low-profile, modular platform for the 2010–2024 5th-Gen 4Runner that mounts with no drilling — it bolts to the factory points for a clean, secure fit. Powder-coated aluminum keeps it light and corrosion-resistant, and custom crossbars with built-in drop points make mounting tents, boards, lights, and storage simple.
| Spec | Detail |
|---|---|
| Material | Powder-coated aluminum |
| Mounting | No-drill, bolt-on to factory points |
| Crossbars | Custom, with built-in drop points |
| Load rating | 600 lb dynamic / 1,000 lb static |
| Extras | Noise-reducing trim; customizable |
| Warranty | Lifetime (manufacturing defects) |
| Fitment | 2010–2024 Toyota 4Runner (5th gen) |
Do I need to drill?
No — it's a full-length no-drill rack that bolts to the 4Runner's factory mounting points.
How much can it hold?
600 lb dynamic (while driving) and 1,000 lb static (parked, e.g. a rooftop tent with occupants).
Does it fit my 4Runner?
Yes — the 2010-2024 Toyota 4Runner (5th generation).
What can I mount to it?
Rooftop tents, recovery boards, light bars, fuel/water storage, and most roof-rack accessories, via the custom crossbars' drop points.
Complete your Toyota 4Runner build
More parts that fit your Toyota 4Runner and pair well with this one — matched and ready to install.
More for your Toyota 4Runner
Picked from the 1846 parts we carry for the Toyota 4Runner, matched to 2010–2024 model years. Check the years and trim in each title — or call us and we’ll confirm fit.
Multi-column

Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!

Financing Available
Pay over time with Affirm or PayPal Credit at checkout, for qualified buyers.

Contact Us
Have a question? Just send us an e-mail at support@nvmos.com
























