Prinsu Design Studio Pro Roof Rack - Ford Bronco 4-Door Hardtop 2021-2026
Warranty Information
Vendor warranty summary
Prinsu Design Studio Warranty
At a glance: Limited lifetime on Prinsu-made parts for the original owner; hardware 1 year; powder coat not covered
This is Prinsu Design Studio's warranty, not an NVMOS policy. We've summarized it in plain English to save you a search. The manufacturer's official terms always govern and can change without notice. Last reviewed on nvmos.com: October 4, 2026.
Coverage by product
| Product or component | Coverage |
|---|---|
| Prinsu-manufactured racks and parts | Limited lifetime (original retail buyer) |
| Hardware kits | 1 year |
| Powder-coat finish | Not covered |
| Missing parts | Report within 90 days of receipt |
| Other brands sold by Prinsu | Original maker's warranty |
- Original purchaser only — coverage does not transfer if you sell it.
- Keep your NVMOS order confirmation — proof of purchase is required.
What's covered
- Defects in materials and workmanship for as long as the original buyer owns the product
- Prinsu decides whether to repair, replace, refund or give store credit
What's not covered
- Powder-coated finish, cosmetic rust and scratches
- Normal wear and tear
- Accidents, racing or competition use, unlawful vehicle use
- Modifications or unauthorized repairs
- Misuse, neglect, overloading, poor installation or maintenance, or not following instructions
- Damage to the vehicle, cargo or other property
How to make a Prinsu Design Studio warranty claim
- Submit the claim through the online form on prinsu.com/warranty (phone claims are not accepted)
- Include a copy of the original invoice
- Wait for an RMA number before shipping
- Ship to the address given with the RMA, with the RMA number clearly on the box; buyer pays return shipping
- Use tracked, insured shipping because Prinsu isn't responsible for loss in transit
Prinsu Design Studio contact: Phone: (866) 522-0697 · Claim page / support
Bought it from NVMOS? Start with us.
Have your order number and a few photos of the issue ready, then call real humans at (920) 249-7744 or send us a message. We'll tell you whether the claim goes through us or straight to Prinsu Design Studio, and help it along either way.
Shop Prinsu Design Studio at NVMOS
Prinsu Pro Ford Bronco Roof Rack | 2021-2025
5th Gen Toyota 4Runner Prinsu Roof Rack Full Non-Drill | 2010-2024
Ford Bronco Accessory Panel | 2021-2025
See all Prinsu Design Studio products, lead times and FAQs →
Disclaimer: The information on this page describes Prinsu Design Studio's own warranty policy. It is not a warranty offered by NVMOS (No Visible Means of Support LLC). Manufacturers update their terms at any time; we review these pages periodically, but the manufacturer's current official policy is the one that applies to your claim. Source: Prinsu Design Studio official warranty information. Last updated on nvmos.com: October 4, 2026. See our return policy for NVMOS's own terms.
About the brand
Prinsu Design Studio builds low-profile roof racks in Idaho Falls, Idaho. NVMOS carries Original and Prinsu Pro roof racks, top racks for caps and campers, ladders, accessory panels and mounts, with fitments centered on Toyota and reaching Ford, GM, Ram, Nissan, Subaru, Rivian and the Sprinter.
Based in: Idaho Falls, Idaho · Made in: Built in-house in Idaho Falls · Lead time: Original roof racks ~1 week; Prinsu Pro ~5 weeks; accessories 1–2 weeks
Shop all 197 Prinsu Design StudioWarrantyLead timesAll brands
Warranty terms are set by Prinsu Design Studio, not NVMOS, and can change. Bought from us? Call (920) 249-7744 and we'll handle the claim with the brand.
The Prinsu Pro Roof Rack for the 2021 and newer Ford Bronco 4-Door with the hardtop is a ground-up update of the Original design. The standout feature is the two-piece layout: the front section comes off in minutes so you can remove the factory front hardtop panels, while the rear Packsaddle section stays bolted down.
The Pro side rail uses an integrated top bend and a two-part construction for more rigidity at a low profile. The custom aluminum crossbars are described as 44 percent stronger than earlier Prinsu crossbars and carry six integrated drop-in points each for mounting accessories. Hardware is corrosion-resistant stainless steel and the rack is powder-coated aluminum.
Fitment
Ford Bronco 4-Door Hardtop, 2021-2026. The mounting feet differ by hardtop type, so verify whether you have a painted hardtop or the MIC hardtop (gray and black, not color matched) before you order. Options include a standard or lightbar-cutout wind deflector and an optional Pack Saddle wind deflector.
Install notes
The rack bolts to the factory anchor points with recessed feet and requires no drilling.
Questions before you order?
Fitment questions are easier to settle before the box ships. Call or text Carl & Anton at (920) 249-7744 or use the chat — real humans in Sheboygan, Wisconsin, not a call center.
Complete your Bronco Parts build
More parts that fit your Bronco Parts and pair well with this one — matched and ready to install.
More for your Ford Bronco
Picked from the 643 parts we carry for the Ford Bronco, matched to 2021–2026 model years. Check the years and trim in each title — or call us and we’ll confirm fit.
Specifications
Prinsu Design Studio Pro Roof Rack FAQs
Do I need to drill my Bronco?
No. The rack mounts to factory anchor points with recessed bolt-on feet and needs no drilling.
How do I choose the hardtop style?
The mounting feet vary by hardtop type. Choose painted hardtop or MIC hardtop (gray and black, not color matched) to match what is on your Bronco.
Can I still remove the front hardtop panels?
Yes. The front section of the two-piece rack can be removed in minutes while the rear Packsaddle section stays installed.
Does it fit the 2-door Bronco?
This listing is for the 4-Door Hardtop. The vendor does not list a 2-door fitment here.
Multi-column

Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!

Financing Available
Buy now, pay later with PayPal Credit — available at checkout.

Contact Us
Have a question? Just send us an e-mail at support@nvmos.com












































