Rear Track Bar Bracket for Jeep Wrangler JK 2007-2018
Warranty Information
Vendor warranty summary
Artec Industries Warranty
At a glance: Limited lifetime warranty against defects in material or workmanship
This is Artec Industries's warranty, not an NVMOS policy. We've summarized it in plain English to save you a search. The manufacturer's official terms always govern and can change without notice. Last reviewed on nvmos.com: October 4, 2026.
Coverage by product
| Product or component | Coverage |
|---|---|
| Artec Industries products | Limited lifetime, starting on delivery date |
| Returns of powder-coated products | Not returnable (manufacturer refund policy) |
What's covered
- Defects in material or workmanship for products bought, installed and used for their intended purpose
- Artec repairs or replaces a defective product at no charge (method at Artec's discretion)
What's not covered
- Misuse, abuse or neglect
- Improper installation
- Incorrect maintenance
How to make a Artec Industries warranty claim
- Call Artec at 855-278-3299 (Mon-Fri 9am-5pm MDT) to describe the issue
- Get an RMA number before shipping anything; packages without one are refused
Artec Industries contact: Phone: 855-278-3299 · Claim page / support
Bought it from NVMOS? Start with us.
Have your order number and a few photos of the issue ready, then call real humans at (920) 249-7744 or send us a message. We'll tell you whether the claim goes through us or straight to Artec Industries, and help it along either way.
Shop Artec Industries at NVMOS
Under Tailgate Plate - Aluminum, for Jeep Wrangler TJ/LJ 1997-2006
Coil Correction Plate for Jeep TJ Front Coil Springs (Pair)
Front and Rear Truss Package for Jeep Gladiator JT 2020+ (Free Front Axle Skid)
See all Artec Industries products, lead times and FAQs →
Disclaimer: The information on this page describes Artec Industries's own warranty policy. It is not a warranty offered by NVMOS (No Visible Means of Support LLC). Manufacturers update their terms at any time; we review these pages periodically, but the manufacturer's current official policy is the one that applies to your claim. Source: Artec Industries official warranty information. Last updated on nvmos.com: October 4, 2026. See our return policy for NVMOS's own terms.
About the brand
Artec Industries builds axle trusses, swap kits, suspension brackets and armor in North Salt Lake, Utah. NVMOS carries Artec reinforcements, control arms, skids, bumpers, fenders and battery mounts for Jeep, Toyota and Super Duty axles. It's for rigs running big tires and lockers that need housings and brackets that stay straight.
Based in: North Salt Lake, Utah · Made in: USA — most parts built in-house in Utah · Founded: 2003 · Lead time: Artec in-stock orders: 2–4 business days; NVMOS stock: 24–48 hours
Shop all 472 Artec IndustriesWarrantyAll brands
Warranty terms are set by Artec Industries, not NVMOS, and can change. Bought from us? Call (920) 249-7744 and we'll handle the claim with the brand.
Lift a Jeep Wrangler JK and the rear track bar geometry goes with it: the factory bracket hangs low, wears, and lets the rear axle wander through corners and whoops. Artec's JK Rear Track Bar Bracket replaces it with a 1/4" formed-steel mount that raises the roll center to suit a 2"+ lift while tucking up higher than the stamped original for real ground clearance. It comes in two versions to match your axle tube — 3.15" for the factory rear Dana 44 or 3.5" for aftermarket and one-ton swap housings.
Features
- 1/4" mild steel, precision CNC cut and formed
- Replaces the worn, low-hanging factory rear track bar bracket
- Raises the roll center to stabilize JKs running 2.0" of lift or more
- Improves ground clearance under the rear axle
- Two variants: 3.15" tube (factory Dana 44) or 3.5" tube (aftermarket / 1-ton swap)
- Weld-on installation; made in the USA
Fits the rear axle of the 2007-2018 Wrangler JK and JKU — measure your axle tube diameter and pick the matching variant before ordering. It is a weld-on part, so mock up your track bar angle at ride height before final welds and paint the bracket afterward. Correct the front end to match with the JK Heavy Duty Raised Track Bar Bracket, tie the rear links together with the JK Rear 3-Link Bracket, and browse the full track bar brackets collection.
Complete your Jeep Wrangler build
More parts that fit your Jeep Wrangler and pair well with this one — matched and ready to install.
$74.99
$100.00
$406.99
$69.99
$899.99
More for your Jeep Wrangler
Picked from the 1750 parts we carry for the Jeep Wrangler, matched to 2007–2018 model years. Check the years and trim in each title — or call us and we’ll confirm fit.
Specifications
Rear Track Bar Bracket for Jeep Wrangler JK 2007-2018 FAQs
Which variant do I need for my axle?
Measure your rear axle tube. The factory JK rear Dana 44 uses a 3.15" tube, so choose that variant if you are on the stock axle; aftermarket housings and 1-ton swap axles typically run a 3.5" tube, so pick the 3.5" version for those. Ordering by tube diameter ensures the bracket saddles the tube correctly for welding.
When does a lifted JK need this bracket?
Once you are at 2.0" of lift or more, the factory rear track bar geometry drops the roll center and the rear end can feel loose or wandering. Raising the track bar mount restores the roll center and settles the rear axle. As a bonus, the new bracket tucks up higher than the low-hanging factory piece for better ground clearance.
Is this a bolt-on part?
No — it is a weld-on replacement for the factory rear track bar bracket. Plan on removing the original, mocking up your track bar angle at ride height, and having the bracket welded by someone experienced with axle housings. Paint it after welding to protect the bare steel.
Multi-column
Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!
Financing Available
Buy now, pay later with PayPal Credit — available at checkout.
Contact Us
Have a question? Just send us an e-mail at support@nvmos.com
