LINK™ Vent Mount Bracket With Midland Magnetic CB Radio Mic Holder | 2" Arm | 2018 - 2023 Jeep JL, Gladiator, and 4XE
Warranty Information
Vendor warranty summary
Tackform Warranty
At a glance: Lifetime on metal parts, 3 years on plastic, 1 year on electronics
This is Tackform's warranty, not an NVMOS policy. We've summarized it in plain English to save you a search. The manufacturer's official terms always govern and can change without notice. Last reviewed on nvmos.com: October 4, 2026.
Coverage by product
| Product or component | Coverage |
|---|---|
| Metal parts | Lifetime |
| Plastic/ABS parts | 3 years |
| Electronics | 1 year |
- Keep your NVMOS order confirmation — proof of purchase is required.
What's covered
- Tackform mounts and their parts bought from Tackform or an authorized reseller
- Only the defective component is replaced, not the whole system
What's not covered
- Devices you attach (phones, GPS units, tablets)
- Abuse, misuse or exposure to extreme temperatures
- Normal wear and tear
- Modified or improperly used mounts
- Discontinued parts with no available replacement
How to make a Tackform warranty claim
- Email clear photos of the mount and the failed area
- Explain how and when it failed
- Include proof of purchase (order number, Amazon order or receipt) and your shipping address
- A small shipping charge applies based on part weight; international customers pay all shipping
Tackform contact: Email: support@tackform.com · Claim page / support
Bought it from NVMOS? Start with us.
Have your order number and a few photos of the issue ready, then call real humans at (920) 249-7744 or send us a message. We'll tell you whether the claim goes through us or straight to Tackform, and help it along either way.
Shop Tackform at NVMOS
TRAXX™ - Accessory Track Dash Bracket With Dual MagSafe Phone Mount | 2014-2018 Chevrolet Silverado & GMC Sierra, 2015-2019 Silverado HD & Sierra HD
TRAXX™ -Accessory Track Dash Bracket With Dual MagSafe Phone Cradles | 2009-2012 RAM 1500 & 2500/3500
TRAXX - Slim Track Dash Bracket With 20LITE Phone & Midland Magnetic CB Radio Mic Mounts | 2016 - 2023 Toyota Tacoma
See all Tackform products, lead times and FAQs →
Disclaimer: The information on this page describes Tackform's own warranty policy. It is not a warranty offered by NVMOS (No Visible Means of Support LLC). Manufacturers update their terms at any time; we review these pages periodically, but the manufacturer's current official policy is the one that applies to your claim. Source: Tackform official warranty information. Last updated on nvmos.com: October 4, 2026. See our return policy for NVMOS's own terms.
About the brand
Tackform has built heavy-duty device mounts in Addison, Illinois since 2012. NVMOS carries their TRAXX dash brackets, 20 Series phone mounts (including MagSafe), tablet and monitor holders, CB mic holders, camera holders and bases for trucks, vans and off-road rigs where the phone needs to stay put.
Based in: Addison, Illinois · Founded: 2012 · Lead time: In-stock ships in 24–48 hrs
Shop all 1894 TackformWarrantyAll brands
Warranty terms are set by Tackform, not NVMOS, and can change. Bought from us? Call (920) 249-7744 and we'll handle the claim with the brand.
JEEP WRANGLER JL, JT, & 4XE MIDLAND MIC HOLDER
VENT MOUNT BRACKET W/ 2" ARM
Upgrade your Jeep Wrangler JL ('18-'23), Gladiator JT ('20-'23), and Wrangler 4xe ('21-'23) with the most rugged and dependable ALL-METAL vent mounted Midland mic holder setup on the market. Engineered to meet the demands of both on-and off-road drivers, each vent mount kit is built from high-grade 6061-T6 aluminum and CNC machined for enhanced strength and durability. Using laser scanning technology, our vent brackets are precisely designed to match the complex contours of your vent bezel, while the hardcoat anodized finish provides an OEM look and feel, seamlessly blending with your vehicle's interior.
Midland Magnetic CB Mic Holder
Made from billet aluminum, this CB radio mic holder is both simple and stylish. It's equipped with a 20mm ball that connects via our Type-B Connection. If needed, you can replace this ball with a 25.4mm, 26mm, or 17mm ball to fit other ball and socket systems. Additionally, the holder has a unique two-part design. It comes with a custom attachment to replace the clip on the back of your Midland radio. This transforms it into a robust magnetic mounting system. With 8 neodymium magnets (4 on each side) and matching polarities, you can easily detach the radio from the mount with just a quarter-turn. (Compatible with Midland MXT275 and Midland MXT575)
Mounts to the Bezel, Not the Blades
Unlike many vent mount alternatives on the market that attach directly to flimsy vent blades, our unique design secures to the outer vent bezel, providing a much stronger and stable mounting surface that can fully support repeated flex and use. By mounting to the vent bezel, our holder avoids blocking the vent and allows the blades to remain adjustable for uninterrupted airflow. Every Tackform vent mount features a custom laser-fit rubber pad, perfectly designed to interface with your specific vent bezel design. This innovation not only prevents slippage but also safeguards your vent from scratches and marring.
Easy Install
Designed for simplicity, our vent mount kit ensures a hassle-free installation process. With clear, step-by-step instructions and all necessary hardware included, you’ll be up and running in no time. Whether you're a seasoned pro or a first-time installer, you'll appreciate how quick and straightforward the installation is.
Complete your Jeep Gladiator build
More parts that fit your Jeep Gladiator and pair well with this one — matched and ready to install.
$60.00
$60.00
$40.00
$75.00
$109.99
More for your Jeep Gladiator
Picked from the 798 parts we carry for the Jeep Gladiator. Check the years and trim in each title — or call us and we’ll confirm fit.
LINK™ Vent Mount Bracket With Midland Magnetic CB Radio Mic Holder | 2" Arm | 2018 FAQs
Which vehicles does this vent mount fit?
It fits the Jeep Wrangler JL (2018-2023), Gladiator JT (2020-2023), and Wrangler 4xe (2021-2023).
Where does the bracket attach?
It mounts to the outer vent bezel, not the vent blades, so the vent is not blocked and the blades stay adjustable.
Which CB mic does the holder work with?
The Midland magnetic holder is compatible with the Midland MXT275 and MXT575. It uses 8 neodymium magnets and releases with a quarter-turn.
What is it made of?
6061-T6 aluminum, CNC machined, with a hardcoat anodized finish and a laser-fit rubber pad. The holder uses a 20mm ball.
Is installation difficult?
Tackform states it is quick and straightforward, with step-by-step instructions and all necessary hardware included.
Multi-column
Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!
Financing Available
Buy now, pay later with PayPal Credit — available at checkout.
Contact Us
Have a question? Just send us an e-mail at support@nvmos.com
