Heavy Duty Raised Track Bar Bracket for Jeep Wrangler JK 2007-2018
Warranty Information
Vendor warranty summary
Artec Industries Warranty
At a glance: Limited lifetime warranty against defects in material or workmanship
This is Artec Industries's warranty, not an NVMOS policy. We've summarized it in plain English to save you a search. The manufacturer's official terms always govern and can change without notice. Last reviewed on nvmos.com: October 4, 2026.
Coverage by product
| Product or component | Coverage |
|---|---|
| Artec Industries products | Limited lifetime, starting on delivery date |
| Returns of powder-coated products | Not returnable (manufacturer refund policy) |
What's covered
- Defects in material or workmanship for products bought, installed and used for their intended purpose
- Artec repairs or replaces a defective product at no charge (method at Artec's discretion)
What's not covered
- Misuse, abuse or neglect
- Improper installation
- Incorrect maintenance
How to make a Artec Industries warranty claim
- Call Artec at 855-278-3299 (Mon-Fri 9am-5pm MDT) to describe the issue
- Get an RMA number before shipping anything; packages without one are refused
Artec Industries contact: Phone: 855-278-3299 · Claim page / support
Bought it from NVMOS? Start with us.
Have your order number and a few photos of the issue ready, then call real humans at (920) 249-7744 or send us a message. We'll tell you whether the claim goes through us or straight to Artec Industries, and help it along either way.
Shop Artec Industries at NVMOS
Under Tailgate Plate - Aluminum, for Jeep Wrangler TJ/LJ 1997-2006
Coil Correction Plate for Jeep TJ Front Coil Springs (Pair)
Front and Rear Truss Package for Jeep Gladiator JT 2020+ (Free Front Axle Skid)
See all Artec Industries products, lead times and FAQs →
Disclaimer: The information on this page describes Artec Industries's own warranty policy. It is not a warranty offered by NVMOS (No Visible Means of Support LLC). Manufacturers update their terms at any time; we review these pages periodically, but the manufacturer's current official policy is the one that applies to your claim. Source: Artec Industries official warranty information. Last updated on nvmos.com: October 4, 2026. See our return policy for NVMOS's own terms.
About the brand
Artec Industries builds axle trusses, swap kits, suspension brackets and armor in North Salt Lake, Utah. NVMOS carries Artec reinforcements, control arms, skids, bumpers, fenders and battery mounts for Jeep, Toyota and Super Duty axles. It's for rigs running big tires and lockers that need housings and brackets that stay straight.
Based in: North Salt Lake, Utah · Made in: USA — most parts built in-house in Utah · Founded: 2003 · Lead time: Artec in-stock orders: 2–4 business days; NVMOS stock: 24–48 hours
Shop all 472 Artec IndustriesWarrantyAll brands
Warranty terms are set by Artec Industries, not NVMOS, and can change. Bought from us? Call (920) 249-7744 and we'll handle the claim with the brand.
A 2"+ lift on a Jeep Wrangler JK leaves the front track bar angled and the roll center low, and the result is body roll and steering that never feels settled. Artec's Heavy Duty Raised Track Bar Bracket replaces the factory front mount on the Dana 30 or Dana 44 with 1/4" CNC-formed steel that moves the track bar mounting point up, bringing the roll center roughly 3" higher. Along the way it lifts the factory sway bar mount 1.75", frees up room to run the steering damper above the tie rod, and clears terrain better than the low-slung stock bracket.
Features
- 1/4" mild steel, CNC laser cut and formed
- Raises the roll center approximately 3" for lifted-JK stability
- Designed for JKs running 2.0" of lift or more
- Lifts the factory sway bar mount 1.75" to keep end-link geometry in check
- Steering damper can rotate to the top side of the tie rod
- Better ground clearance than the stamped factory bracket
- Weld-on, made in the USA
Fits the front axle of the 2007-2018 Wrangler JK and JKU with either the Dana 30 or Dana 44. It is a weld-on part that replaces the factory bracket outright — plan on cutting, grinding, and experienced welding, then paint the bare steel and confirm the track bar sits close to parallel with the drag link at ride height. Prefer to keep stock geometry? The JK Heavy Duty Stock Track Bar Bracket is the non-raised twin, and the JK Rear Track Bar Bracket corrects the other axle. Compare every option in track bar brackets.
Complete your Jeep Wrangler build
More parts that fit your Jeep Wrangler and pair well with this one — matched and ready to install.
$91.29
$100.00
$406.99
$69.99
$899.99
More for your Jeep Wrangler
Picked from the 1751 parts we carry for the Jeep Wrangler, matched to 2007–2018 model years. Check the years and trim in each title — or call us and we’ll confirm fit.
Shop all 1751 parts for your Jeep Wrangler →
Specifications
Heavy Duty Raised Track Bar Bracket for Jeep Wrangler JK 2007-2018 FAQs
How much lift do I need before choosing the raised version?
This bracket is intended for JKs running 2.0" of lift or more, where the factory track bar angle and roll center have genuinely degraded. At stock or near-stock height, the raised geometry would over-correct — the Heavy Duty Stock Track Bar Bracket is the right pick there. Confirm the track bar ends up near-parallel with your drag link at ride height.
What improvements will I actually feel?
Raising the mount restores a flatter track bar, which recenters the axle and firms up steering feel, while the roughly 3" higher roll center reduces body roll and makes a lifted JK more stable on-road and off-camber. The 1.75" sway bar mount lift keeps the end links happy, and the relocated steering damper stays out of the rocks.
Is it a bolt-on installation?
No. The factory bracket is removed and this one is welded in its place, so plan on cutting, grinding, and welding by someone experienced with axle housings. Mock the geometry up before final welds and paint the bare steel afterward. An alignment check is smart once everything is settled.
Multi-column
Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!
Financing Available
Buy now, pay later with PayPal Credit — available at checkout.
Contact Us
Have a question? Just send us an e-mail at support@nvmos.com
