Protection Package for Jeep Wrangler JLU 3.6L 2018-2020: Bellypan, CAD Skid, LCA Skids
Warranty Information
Vendor warranty summary
Artec Industries Warranty
At a glance: Limited lifetime warranty against defects in material or workmanship
This is Artec Industries's warranty, not an NVMOS policy. We've summarized it in plain English to save you a search. The manufacturer's official terms always govern and can change without notice. Last reviewed on nvmos.com: October 4, 2026.
Coverage by product
| Product or component | Coverage |
|---|---|
| Artec Industries products | Limited lifetime, starting on delivery date |
| Returns of powder-coated products | Not returnable (manufacturer refund policy) |
What's covered
- Defects in material or workmanship for products bought, installed and used for their intended purpose
- Artec repairs or replaces a defective product at no charge (method at Artec's discretion)
What's not covered
- Misuse, abuse or neglect
- Improper installation
- Incorrect maintenance
How to make a Artec Industries warranty claim
- Call Artec at 855-278-3299 (Mon-Fri 9am-5pm MDT) to describe the issue
- Get an RMA number before shipping anything; packages without one are refused
Artec Industries contact: Phone: 855-278-3299 · Claim page / support
Bought it from NVMOS? Start with us.
Have your order number and a few photos of the issue ready, then call real humans at (920) 249-7744 or send us a message. We'll tell you whether the claim goes through us or straight to Artec Industries, and help it along either way.
Shop Artec Industries at NVMOS
Under Tailgate Plate - Aluminum, for Jeep Wrangler TJ/LJ 1997-2006
Coil Correction Plate for Jeep TJ Front Coil Springs (Pair)
Front and Rear Truss Package for Jeep Gladiator JT 2020+ (Free Front Axle Skid)
See all Artec Industries products, lead times and FAQs →
Disclaimer: The information on this page describes Artec Industries's own warranty policy. It is not a warranty offered by NVMOS (No Visible Means of Support LLC). Manufacturers update their terms at any time; we review these pages periodically, but the manufacturer's current official policy is the one that applies to your claim. Source: Artec Industries official warranty information. Last updated on nvmos.com: October 4, 2026. See our return policy for NVMOS's own terms.
About the brand
Artec Industries builds axle trusses, swap kits, suspension brackets and armor in North Salt Lake, Utah. NVMOS carries Artec reinforcements, control arms, skids, bumpers, fenders and battery mounts for Jeep, Toyota and Super Duty axles. It's for rigs running big tires and lockers that need housings and brackets that stay straight.
Based in: North Salt Lake, Utah · Made in: USA — most parts built in-house in Utah · Founded: 2003 · Lead time: Artec in-stock orders: 2–4 business days; NVMOS stock: 24–48 hours
Shop all 472 Artec IndustriesWarrantyAll brands
Warranty terms are set by Artec Industries, not NVMOS, and can change. Bought from us? Call (920) 249-7744 and we'll handle the claim with the brand.
This protection package bundles Artec Industries' full-length aluminum bellypan for the 4-door Jeep Wrangler Unlimited (JLU) with the two axle-area skids most 3.6L owners add next, plus an Artec hat, and applies a $100 instant rebate over buying the pieces separately. The factory stamped skids under a JLU leave the oil pan, transmission, and transfer case thinly covered, the Center Axle Disconnect actuator hanging exposed on the front axle, and the rear lower control arm mounts taking direct rock hits. This bundle closes all three gaps in one order, and everything bolts on with no welding. It fits the 2018-2020 JLU with the 3.6L Pentastar V6, since Artec cuts the oil door and exhaust clearance for each specific engine and year range.
Features
- Full-length bellypan cut from 1/4" 6061-T6 heat-treated aluminum, strong protection at a fraction of steel's weight
- Mounts on 3/16" zinc-plated steel brackets that tie into factory hardpoints
- Hinged oil-access door allows oil changes without dropping the skid
- Smooth, flat underbelly slides over rocks instead of snagging on stamped factory skids
- Front Axle CAD Skid in 1/4" fully welded, powder-coated steel guards the fragile disconnect actuator
- Rear LCA Skids, a pair of 1/4" boxed steel guards for the rear lower control arm mounts
- Countersunk hardware matched to OEM thread pitch for a clean, no-weld bolt-on install
- Includes an Artec embroidered hat and a $100 instant rebate versus buying separately
Confirm your Jeep is a 4-door JLU with the 3.6L engine, model year 2018-2020, before ordering, because the oil-door and exhaust cutouts are engine- and year-specific. The included Front Axle CAD Skid and Rear LCA Skids are the same bolt-on parts sold individually. While the Jeep is on the lift, many builders also upgrade the arms themselves with the JL Aluminum Mid Arm Kit, and you can browse the rest of our skid plates for other engines and years.
Complete your Jeep Wrangler build
More parts that fit your Jeep Wrangler and pair well with this one — matched and ready to install.
$3,126.97
$100.00
$406.99
$69.99
$899.99
More for your Jeep Wrangler
Picked from the 1775 parts we carry for the Jeep Wrangler. Check the years and trim in each title — or call us and we’ll confirm fit.
Specifications
Protection Package for Jeep Wrangler JLU 3.6L 2018-2020: Bellypan, CAD Skid, LCA Skids FAQs
Will this package fit my Wrangler?
It is built for the 4-door Jeep Wrangler Unlimited (JLU) with the 3.6L Pentastar V6, model years 2018-2020. Artec cuts the oil-access door and exhaust clearance specifically for each engine and year range, so match your engine and year to this listing before ordering — other JL engines use different package listings.
Do I need to weld or drill anything to install it?
No. The bellypan mounts on 3/16" zinc-plated steel brackets that tie into factory hardpoints using countersunk bolts matched to OEM thread pitch, and the CAD skid and rear LCA skids are bolt-on as well. Most owners finish the install with hand tools in an afternoon.
What exactly is in the package?
You get the full-length 1/4" 6061-T6 aluminum bellypan with hinged oil-access door and all mounting hardware, the Front Axle CAD Skid in 1/4" welded powder-coated steel, a pair of 1/4" boxed steel Rear LCA Skids, and an Artec embroidered hat. A $100 instant rebate is applied versus buying the pieces individually.
Multi-column
Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!
Financing Available
Buy now, pay later with PayPal Credit — available at checkout.
Contact Us
Have a question? Just send us an e-mail at support@nvmos.com
