4-Link Hardware Assembly for 7/8" & 1.25" Rod Ends
Most 4-links get built with lighter 7/8" rod ends up top and stout 1.25" rod ends on the lowers, and this assembly is the fastener package for exactly that mix. It gathers the bolts and misalignment hardware for all four links so a triangulated or parallel 4-link bolts to its brackets with correctly sized pieces at every joint. Skipping this step and improvising hardware is how link joints end up sloppy — the bolt and spacer dimensions here are matched to the two bore sizes.
Features
- All bolts and misalignment hardware for a four-link running mixed rod end sizes
- Correct dimensions for both 7/8" and 1.25" rod end bores
- Fits Artec link brackets, truss link mounts, and Easy 4-Link kits
- Covers the common setup of 7/8" uppers over 1.25" lowers
- One SKU (HK0001) for the full link-to-bracket connection
- Made in the USA
Order by rod end size, not by vehicle: this kit fits a 4-link mixing 7/8" and 1.25" rod ends. If every link runs 1.25" ends, use the 4-Link Hardware Assembly for All 1.25" Rod Ends; for a three-link front, see the 3-Link Hardware Assembly. Building links from raw tube? Add the 7/8"-14 TPI Tube Adapter and matching jam nuts from our suspension components collection.
4-Link Hardware Assembly for 7/8" & 1.25" Rod Ends FAQs
Which builds is this hardware kit meant for?
Any 4-link that mixes 7/8" and 1.25" rod ends — most commonly 7/8" upper links over 1.25" lower links on a triangulated or parallel setup. It supplies the bolts and misalignment hardware for all four links in one package.
What if all four of my links use 1.25" rod ends?
Order the companion kit instead: the 4-Link Hardware Assembly for All 1.25" Rod Ends. Rod-end bore size determines bolt and spacer dimensions, so the kits are not interchangeable — check the ends on your link kit before purchasing.
What else do I need to finish a 4-link?
This kit covers only the mounting hardware. You still need link tubes, tube adapters, rod ends, jam nuts, and frame or axle brackets. Artec's tube adapters and jam nuts in matching 7/8"-14 and 1.25"-12 threads complete DIY links, and welding is required for brackets and tube adapters.
Multi-column
Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!
Financing Available
Buy now and pay later with Affirm.
Contact Us
Have a question? Just send us an e-mail at support@nvmos.com
