4-Link Hardware Assembly for All 1.25" Rod Ends
Warranty Information
Vendor warranty summary
Artec Industries Warranty
At a glance: Limited lifetime warranty against defects in material or workmanship
This is Artec Industries's warranty, not an NVMOS policy. We've summarized it in plain English to save you a search. The manufacturer's official terms always govern and can change without notice. Last reviewed on nvmos.com: October 4, 2026.
Coverage by product
| Product or component | Coverage |
|---|---|
| Artec Industries products | Limited lifetime, starting on delivery date |
| Returns of powder-coated products | Not returnable (manufacturer refund policy) |
What's covered
- Defects in material or workmanship for products bought, installed and used for their intended purpose
- Artec repairs or replaces a defective product at no charge (method at Artec's discretion)
What's not covered
- Misuse, abuse or neglect
- Improper installation
- Incorrect maintenance
How to make a Artec Industries warranty claim
- Call Artec at 855-278-3299 (Mon-Fri 9am-5pm MDT) to describe the issue
- Get an RMA number before shipping anything; packages without one are refused
Artec Industries contact: Phone: 855-278-3299 · Claim page / support
Bought it from NVMOS? Start with us.
Have your order number and a few photos of the issue ready, then call real humans at (920) 249-7744 or send us a message. We'll tell you whether the claim goes through us or straight to Artec Industries, and help it along either way.
Shop Artec Industries at NVMOS
Under Tailgate Plate - Aluminum, for Jeep Wrangler TJ/LJ 1997-2006
Coil Correction Plate for Jeep TJ Front Coil Springs (Pair)
Front and Rear Truss Package for Jeep Gladiator JT 2020+ (Free Front Axle Skid)
See all Artec Industries products, lead times and FAQs →
Disclaimer: The information on this page describes Artec Industries's own warranty policy. It is not a warranty offered by NVMOS (No Visible Means of Support LLC). Manufacturers update their terms at any time; we review these pages periodically, but the manufacturer's current official policy is the one that applies to your claim. Source: Artec Industries official warranty information. Last updated on nvmos.com: October 4, 2026. See our return policy for NVMOS's own terms.
About the brand
Artec Industries builds axle trusses, swap kits, suspension brackets and armor in North Salt Lake, Utah. NVMOS carries Artec reinforcements, control arms, skids, bumpers, fenders and battery mounts for Jeep, Toyota and Super Duty axles. It's for rigs running big tires and lockers that need housings and brackets that stay straight.
Based in: North Salt Lake, Utah · Made in: USA — most parts built in-house in Utah · Founded: 2003 · Lead time: Artec in-stock orders: 2–4 business days; NVMOS stock: 24–48 hours
Shop all 472 Artec IndustriesWarrantyAll brands
Warranty terms are set by Artec Industries, not NVMOS, and can change. Bought from us? Call (920) 249-7744 and we'll handle the claim with the brand.
When every link in a 4-link runs a 1.25" rod end — the heavy-duty route for full-width axles, one-ton swaps, and hard-used trail rigs — this assembly supplies the bolts and misalignment hardware for all four links in one package. Because bolt diameter and spacer stack are driven by rod-end bore, the kit is built specifically for an all-1.25" configuration, whether the geometry is triangulated or parallel. It is the difference between assembling a suspension and improvising one.
Features
- Bolts and misalignment hardware for all four links of a 4-link suspension
- Every piece sized for 1.25" rod end bores
- Compatible with Artec link brackets, truss link mounts, and Easy 4-Link kits
- Suits triangulated and parallel 4-link geometry alike
- Single SKU (HK0002) covers the complete link-to-bracket hardware
- Made in the USA
Match this kit to your rod ends, not your vehicle: it is correct only when all four links carry 1.25" rod ends. Running 7/8" uppers instead? Use the 4-Link Hardware Assembly for 7/8" & 1.25" Rod Ends, or the 3-Link Hardware Assembly for a three-link build. Fabricating the links themselves calls for the 1.25"-12 TPI Tube Adapter and 1.25"-12 TPI Jam Nut.
Multi-column
Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!
Financing Available
Pay over time with PayPal Credit at checkout.
Contact Us
Have a question? Just send us an e-mail at support@nvmos.com
