4-Link Hardware Assembly for 7/8" & 1.25" Rod Ends
Warranty Information
Vendor warranty summary
Artec Industries Warranty
At a glance: Limited lifetime warranty against defects in material or workmanship
This is Artec Industries's warranty, not an NVMOS policy. We've summarized it in plain English to save you a search. The manufacturer's official terms always govern and can change without notice. Last reviewed on nvmos.com: October 4, 2026.
Coverage by product
| Product or component | Coverage |
|---|---|
| Artec Industries products | Limited lifetime, starting on delivery date |
| Returns of powder-coated products | Not returnable (manufacturer refund policy) |
What's covered
- Defects in material or workmanship for products bought, installed and used for their intended purpose
- Artec repairs or replaces a defective product at no charge (method at Artec's discretion)
What's not covered
- Misuse, abuse or neglect
- Improper installation
- Incorrect maintenance
How to make a Artec Industries warranty claim
- Call Artec at 855-278-3299 (Mon-Fri 9am-5pm MDT) to describe the issue
- Get an RMA number before shipping anything; packages without one are refused
Artec Industries contact: Phone: 855-278-3299 · Claim page / support
Bought it from NVMOS? Start with us.
Have your order number and a few photos of the issue ready, then call real humans at (920) 249-7744 or send us a message. We'll tell you whether the claim goes through us or straight to Artec Industries, and help it along either way.
Shop Artec Industries at NVMOS
Under Tailgate Plate - Aluminum, for Jeep Wrangler TJ/LJ 1997-2006
Coil Correction Plate for Jeep TJ Front Coil Springs (Pair)
Front and Rear Truss Package for Jeep Gladiator JT 2020+ (Free Front Axle Skid)
See all Artec Industries products, lead times and FAQs →
Disclaimer: The information on this page describes Artec Industries's own warranty policy. It is not a warranty offered by NVMOS (No Visible Means of Support LLC). Manufacturers update their terms at any time; we review these pages periodically, but the manufacturer's current official policy is the one that applies to your claim. Source: Artec Industries official warranty information. Last updated on nvmos.com: October 4, 2026. See our return policy for NVMOS's own terms.
About the brand
Artec Industries builds axle trusses, swap kits, suspension brackets and armor in North Salt Lake, Utah. NVMOS carries Artec reinforcements, control arms, skids, bumpers, fenders and battery mounts for Jeep, Toyota and Super Duty axles. It's for rigs running big tires and lockers that need housings and brackets that stay straight.
Based in: North Salt Lake, Utah · Made in: USA — most parts built in-house in Utah · Founded: 2003 · Lead time: Artec in-stock orders: 2–4 business days; NVMOS stock: 24–48 hours
Shop all 472 Artec IndustriesWarrantyAll brands
Warranty terms are set by Artec Industries, not NVMOS, and can change. Bought from us? Call (920) 249-7744 and we'll handle the claim with the brand.
Most 4-links get built with lighter 7/8" rod ends up top and stout 1.25" rod ends on the lowers, and this assembly is the fastener package for exactly that mix. It gathers the bolts and misalignment hardware for all four links so a triangulated or parallel 4-link bolts to its brackets with correctly sized pieces at every joint. Skipping this step and improvising hardware is how link joints end up sloppy — the bolt and spacer dimensions here are matched to the two bore sizes.
Features
- All bolts and misalignment hardware for a four-link running mixed rod end sizes
- Correct dimensions for both 7/8" and 1.25" rod end bores
- Fits Artec link brackets, truss link mounts, and Easy 4-Link kits
- Covers the common setup of 7/8" uppers over 1.25" lowers
- One SKU (HK0001) for the full link-to-bracket connection
- Made in the USA
Order by rod end size, not by vehicle: this kit fits a 4-link mixing 7/8" and 1.25" rod ends. If every link runs 1.25" ends, use the 4-Link Hardware Assembly for All 1.25" Rod Ends; for a three-link front, see the 3-Link Hardware Assembly. Building links from raw tube? Add the 7/8"-14 TPI Tube Adapter and matching jam nuts from our suspension components collection.
Specifications
4-Link Hardware Assembly for 7/8" & 1.25" Rod Ends FAQs
Which builds is this hardware kit meant for?
Any 4-link that mixes 7/8" and 1.25" rod ends — most commonly 7/8" upper links over 1.25" lower links on a triangulated or parallel setup. It supplies the bolts and misalignment hardware for all four links in one package.
What if all four of my links use 1.25" rod ends?
Order the companion kit instead: the 4-Link Hardware Assembly for All 1.25" Rod Ends. Rod-end bore size determines bolt and spacer dimensions, so the kits are not interchangeable — check the ends on your link kit before purchasing.
What else do I need to finish a 4-link?
This kit covers only the mounting hardware. You still need link tubes, tube adapters, rod ends, jam nuts, and frame or axle brackets. Artec's tube adapters and jam nuts in matching 7/8"-14 and 1.25"-12 threads complete DIY links, and welding is required for brackets and tube adapters.
Multi-column
Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!
Financing Available
Buy now, pay later with PayPal Credit — available at checkout.
Contact Us
Have a question? Just send us an e-mail at support@nvmos.com
