3-Link Hardware Assembly for 7/8" & 1.25" Rod Ends
Warranty Information
Vendor warranty summary
Artec Industries Warranty
At a glance: Limited lifetime warranty against defects in material or workmanship
This is Artec Industries's warranty, not an NVMOS policy. We've summarized it in plain English to save you a search. The manufacturer's official terms always govern and can change without notice. Last reviewed on nvmos.com: October 4, 2026.
Coverage by product
| Product or component | Coverage |
|---|---|
| Artec Industries products | Limited lifetime, starting on delivery date |
| Returns of powder-coated products | Not returnable (manufacturer refund policy) |
What's covered
- Defects in material or workmanship for products bought, installed and used for their intended purpose
- Artec repairs or replaces a defective product at no charge (method at Artec's discretion)
What's not covered
- Misuse, abuse or neglect
- Improper installation
- Incorrect maintenance
How to make a Artec Industries warranty claim
- Call Artec at 855-278-3299 (Mon-Fri 9am-5pm MDT) to describe the issue
- Get an RMA number before shipping anything; packages without one are refused
Artec Industries contact: Phone: 855-278-3299 · Claim page / support
Bought it from NVMOS? Start with us.
Have your order number and a few photos of the issue ready, then call real humans at (920) 249-7744 or send us a message. We'll tell you whether the claim goes through us or straight to Artec Industries, and help it along either way.
Shop Artec Industries at NVMOS
Under Tailgate Plate - Aluminum, for Jeep Wrangler TJ/LJ 1997-2006
Coil Correction Plate for Jeep TJ Front Coil Springs (Pair)
Front and Rear Truss Package for Jeep Gladiator JT 2020+ (Free Front Axle Skid)
See all Artec Industries products, lead times and FAQs →
Disclaimer: The information on this page describes Artec Industries's own warranty policy. It is not a warranty offered by NVMOS (No Visible Means of Support LLC). Manufacturers update their terms at any time; we review these pages periodically, but the manufacturer's current official policy is the one that applies to your claim. Source: Artec Industries official warranty information. Last updated on nvmos.com: October 4, 2026. See our return policy for NVMOS's own terms.
About the brand
Artec Industries builds axle trusses, swap kits, suspension brackets and armor in North Salt Lake, Utah. NVMOS carries Artec reinforcements, control arms, skids, bumpers, fenders and battery mounts for Jeep, Toyota and Super Duty axles. It's for rigs running big tires and lockers that need housings and brackets that stay straight.
Based in: North Salt Lake, Utah · Made in: USA — most parts built in-house in Utah · Founded: 2003 · Lead time: Artec in-stock orders: 2–4 business days; NVMOS stock: 24–48 hours
Shop all 472 Artec IndustriesWarrantyAll brands
Warranty terms are set by Artec Industries, not NVMOS, and can change. Bought from us? Call (920) 249-7744 and we'll handle the claim with the brand.
This is the complete bolt and misalignment-spacer package for assembling a 3-link suspension built around 7/8" and 1.25" rod ends — the common pairing of a lighter upper link over heavy lower links. Rod-end bore size dictates the bolt and spacer dimensions, so this kit is matched specifically to that combination and ties both lower links and the upper link to their brackets with the correct hardware. It keeps a link build organized instead of stalling while you chase fasteners one at a time.
Features
- All bolts and misalignment hardware to mount a complete 3-link — two lowers and one upper
- Correctly sized for 7/8" and 1.25" rod end bores
- Works with Artec link brackets, truss link mounts, and Easy 3-Link kits
- One SKU (HK0003) covers the whole link-to-bracket interface
- Note: spacers for the 1.25" rod ends use a 3/4" bolt hole — brackets with 9/16" holes must be drilled to 3/4" to match
- Made in the USA
This kit is matched to rod end size, not to a vehicle, so verify your rod end bores before ordering — if your build uses different sizes, pick the matching assembly such as the 4-Link Hardware Assembly for 7/8" & 1.25" Rod Ends or the 4-Link Hardware Assembly for All 1.25" Rod Ends. Building your own links? See the 1.25"-12 TPI Tube Adapter and the rest of our suspension components.
Specifications
3-Link Hardware Assembly for 7/8" & 1.25" Rod Ends FAQs
Which rod end sizes does this hardware fit?
It is sized for a 3-link built with 7/8" and 1.25" rod ends, typically a 7/8" upper over 1.25" lowers. If your build uses different rod end sizes, choose the matching Artec hardware assembly instead — there are 4-link versions for mixed and all-1.25" setups.
Will I need to modify my brackets?
Possibly. The spacers for the 1.25" rod ends use a 3/4" bolt hole, and some Artec brackets ship with a 9/16" hole that must be drilled out to 3/4" to accept this hardware. Check your bracket hole sizes against the Artec hardware chart before assembly.
Does the kit include links or rod ends?
No — this is the mounting hardware only: the bolts and misalignment spacers that tie the rod ends to their brackets. Link tubes, tube adapters, rod ends, and jam nuts are sold separately, so plan the full parts list before you start the build.
Multi-column
Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!
Financing Available
Buy now, pay later with PayPal Credit — available at checkout.
Contact Us
Have a question? Just send us an e-mail at support@nvmos.com
