Easy 3-Link Kit F is the truss-matched version of Artec Industries' 3-link package: the same proven chromoly joint set and panhard hardware as the rest of the line, but with a single 2.63" upper link mount sized to land on Artec's 60-series trusses instead of a stand-alone tower. If a trussed axle is going under your rig, this keeps the upper link geometry known-good from the first tack weld rather than improvised. Driver- or passenger-side upper link orientation and DOM tubing are selected at checkout.
Features
- Single 2.63" truss upper link mount designed for Artec 60-series trusses
- Heat- and cryo-treated chromoly rod ends: 1.25"-12tpi x 1" bore mains, 7/8"-14tpi x 3/4" bore panhard
- Tube adapters and jam nuts with machined wrench flats throughout
- Two lower link frame brackets, 10-degree lower axle brackets, and a 0-degree inner frame bracket
- Adjustable panhard frame and truss mounts
- Sixteen high-misalignment spacers: four 3/4"-9/16" and twelve 1"-3/4"
- Optional DOM tube pack: one 4-ft 1.5" OD and three 4-ft 2" OD sticks, .250" wall
Like the rest of the Easy Link line this is a universal fabrication kit — you supply the trussed axle, set the geometry, and weld the brackets, so professional fab skills apply. No truss on the axle? Easy 3-Link Kit G swaps the truss mount for an adjustable upper link tower, and builders wanting a dual upper bracket should look at Easy 3-Link Kit I. Find matching trusses in axle reinforcements and more link hardware in control arms.
Specifications
Easy 3-Link Kit F for Artec Trusses FAQs
Which trusses does Kit F work with?
It is packaged for Artec's 60-series axle trusses: the single 2.63" upper link mount is sized to weld to the truss, so the upper link picks up a proven mounting point instead of a fabricated one-off. You supply the truss and axle; the kit supplies the links, joints, brackets, and panhard hardware.
How does Kit F differ from Kit G?
Kit G uses an adjustable upper link tower for axles without a front truss, while Kit F mounts the upper link directly to an Artec truss. Both build a 3-link with a panhard bar and share the same chromoly rod end package.
What exactly comes in the box?
Six 1.25"-12tpi x 1" bore main link rod ends with tube adapters and jam nuts, 7/8"-14tpi panhard rod ends with adapters and jam nuts, sixteen high-misalignment spacers, the truss upper link mount, lower link frame and 10-degree axle brackets, a 0-degree inner frame bracket, and adjustable panhard frame and truss mounts. DOM tubing — one 1.5" OD and three 2" OD 4-ft sticks — ships only with the Yes Tubing option.
Multi-column
Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!
Financing Available
Buy now and pay later with Affirm.
Contact Us
Have a question? Just send us an e-mail at support@nvmos.com
