Easy 3-Link Kit I - Dual Bracket for Artec Truss
Warranty Information
Vendor warranty summary
Artec Industries Warranty
At a glance: Limited lifetime warranty against defects in material or workmanship
This is Artec Industries's warranty, not an NVMOS policy. We've summarized it in plain English to save you a search. The manufacturer's official terms always govern and can change without notice. Last reviewed on nvmos.com: October 4, 2026.
Coverage by product
| Product or component | Coverage |
|---|---|
| Artec Industries products | Limited lifetime, starting on delivery date |
| Returns of powder-coated products | Not returnable (manufacturer refund policy) |
What's covered
- Defects in material or workmanship for products bought, installed and used for their intended purpose
- Artec repairs or replaces a defective product at no charge (method at Artec's discretion)
What's not covered
- Misuse, abuse or neglect
- Improper installation
- Incorrect maintenance
How to make a Artec Industries warranty claim
- Call Artec at 855-278-3299 (Mon-Fri 9am-5pm MDT) to describe the issue
- Get an RMA number before shipping anything; packages without one are refused
Artec Industries contact: Phone: 855-278-3299 · Claim page / support
Bought it from NVMOS? Start with us.
Have your order number and a few photos of the issue ready, then call real humans at (920) 249-7744 or send us a message. We'll tell you whether the claim goes through us or straight to Artec Industries, and help it along either way.
Shop Artec Industries at NVMOS
Under Tailgate Plate - Aluminum, for Jeep Wrangler TJ/LJ 1997-2006
Coil Correction Plate for Jeep TJ Front Coil Springs (Pair)
Front and Rear Truss Package for Jeep Gladiator JT 2020+ (Free Front Axle Skid)
See all Artec Industries products, lead times and FAQs →
Disclaimer: The information on this page describes Artec Industries's own warranty policy. It is not a warranty offered by NVMOS (No Visible Means of Support LLC). Manufacturers update their terms at any time; we review these pages periodically, but the manufacturer's current official policy is the one that applies to your claim. Source: Artec Industries official warranty information. Last updated on nvmos.com: October 4, 2026. See our return policy for NVMOS's own terms.
About the brand
Artec Industries builds axle trusses, swap kits, suspension brackets and armor in North Salt Lake, Utah. NVMOS carries Artec reinforcements, control arms, skids, bumpers, fenders and battery mounts for Jeep, Toyota and Super Duty axles. It's for rigs running big tires and lockers that need housings and brackets that stay straight.
Based in: North Salt Lake, Utah · Made in: USA — most parts built in-house in Utah · Founded: 2003 · Lead time: Artec in-stock orders: 2–4 business days; NVMOS stock: 24–48 hours
Shop all 472 Artec IndustriesWarrantyAll brands
Warranty terms are set by Artec Industries, not NVMOS, and can change. Bought from us? Call (920) 249-7744 and we'll handle the claim with the brand.
Easy 3-Link Kit I is the hardware bundle for hanging a 3-link and panhard off an axle wearing an Artec 60-series truss, using Artec's Dual 3-Link Bracket as the upper mounting point. Chasing down individually sized rod ends, weld-in tube adapters, jam nuts, and misalignment spacers is the slow part of any link build; Kit I ships the correct matched sizes in one order so the axle can go from bare truss to located suspension in a single stretch of shop time. Vehicle-specific options cover Dodge, 1985-1991 Ford, and 1978-1979 Chevy/Ford applications.
Features
- Built around the Artec Dual 3-Link Bracket mounting to an Artec 60 truss
- Heat-treated chromoly rod ends: 3 RH and 3 LH at 1.25"-12 tpi with 1.0" bore for the links
- Dedicated panhard rod ends: 1 RH and 1 LH at 7/8"-14 tpi with 3/4" bore
- Matching weld-in tube adapters with wrench flats, plus jam nuts for every joint
- Four 3/4"-to-9/16" high-misalignment spacers so the joints flex without binding
- Order with four-foot DOM tubing (1.5" and 2.0") or tube-free to run your own stock
This is a fabricator's kit for custom Jeep, truck, and buggy builds rather than a vehicle-specific bolt-on: tube adapters weld into the links and the mounts weld to axle and frame, so competent welding is non-negotiable. It assumes an Artec truss and the Dual 3-Link Bracket as the foundation. Prefer an adjustable upper link layout instead? See Easy 3-Link Kit H — and if the plan calls for four links, the 4-Link Tube and End Kit covers the same hardware for that geometry.
Specifications
Easy 3-Link Kit I FAQs
Do I need an Artec truss to use Kit I?
Yes. The kit is designed around Artec 60-series trusses with the Dual 3-Link Bracket providing the upper link mounting, and the geometry assumes those pieces are in place. On a bare axle without the truss and bracket, the hardware has nothing correctly positioned to thread into.
What is the difference between Kit I and Kit H?
Kit I is the dual-bracket configuration for axles wearing an Artec truss, while Kit H builds around the BR1071 Dual 3-Link Bracket with an adjustable upper link layout. The rod-end, adapter, and spacer sizes are similar — the difference is the upper link mounting approach, so choose based on how your axle is set up.
Does the kit include link tubing?
Only when you select the tubing option, which adds four-foot DOM lengths in 1.5" and 2.0" diameters for the links and panhard. Pick "No Tubing" if you would rather source DOM locally. Either way, the weld-in tube adapters are included and get burned into whatever tube you run.
Multi-column
Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!
Financing Available
Buy now, pay later with PayPal Credit — available at checkout.
Contact Us
Have a question? Just send us an e-mail at support@nvmos.com
