Odyssey PC925 Battery Mount
Warranty Information
Vendor warranty summary
Artec Industries Warranty
At a glance: Limited lifetime warranty against defects in material or workmanship
This is Artec Industries's warranty, not an NVMOS policy. We've summarized it in plain English to save you a search. The manufacturer's official terms always govern and can change without notice. Last reviewed on nvmos.com: October 4, 2026.
Coverage by product
| Product or component | Coverage |
|---|---|
| Artec Industries products | Limited lifetime, starting on delivery date |
| Returns of powder-coated products | Not returnable (manufacturer refund policy) |
What's covered
- Defects in material or workmanship for products bought, installed and used for their intended purpose
- Artec repairs or replaces a defective product at no charge (method at Artec's discretion)
What's not covered
- Misuse, abuse or neglect
- Improper installation
- Incorrect maintenance
How to make a Artec Industries warranty claim
- Call Artec at 855-278-3299 (Mon-Fri 9am-5pm MDT) to describe the issue
- Get an RMA number before shipping anything; packages without one are refused
Artec Industries contact: Phone: 855-278-3299 · Claim page / support
Bought it from NVMOS? Start with us.
Have your order number and a few photos of the issue ready, then call real humans at (920) 249-7744 or send us a message. We'll tell you whether the claim goes through us or straight to Artec Industries, and help it along either way.
Shop Artec Industries at NVMOS
Under Tailgate Plate - Aluminum, for Jeep Wrangler TJ/LJ 1997-2006
Coil Correction Plate for Jeep TJ Front Coil Springs (Pair)
Front and Rear Truss Package for Jeep Gladiator JT 2020+ (Free Front Axle Skid)
See all Artec Industries products, lead times and FAQs →
Disclaimer: The information on this page describes Artec Industries's own warranty policy. It is not a warranty offered by NVMOS (No Visible Means of Support LLC). Manufacturers update their terms at any time; we review these pages periodically, but the manufacturer's current official policy is the one that applies to your claim. Source: Artec Industries official warranty information. Last updated on nvmos.com: October 4, 2026. See our return policy for NVMOS's own terms.
About the brand
Artec Industries builds axle trusses, swap kits, suspension brackets and armor in North Salt Lake, Utah. NVMOS carries Artec reinforcements, control arms, skids, bumpers, fenders and battery mounts for Jeep, Toyota and Super Duty axles. It's for rigs running big tires and lockers that need housings and brackets that stay straight.
Based in: North Salt Lake, Utah · Made in: USA — most parts built in-house in Utah · Founded: 2003 · Lead time: Artec in-stock orders: 2–4 business days; NVMOS stock: 24–48 hours
Shop all 472 Artec IndustriesWarrantyAll brands
Warranty terms are set by Artec Industries, not NVMOS, and can change. Bought from us? Call (920) 249-7744 and we'll handle the claim with the brand.
The Odyssey PC925 is a favorite compact battery for buggies, race cars, and weight-conscious trail builds, and this Artec Industries tray holds it dead still. Vibration is what kills small AGM batteries — a case that can chatter against a loose clamp will wear through and fail early. Artec CNC-cuts this mount from 10-gauge (.130") cold-roll steel as one piece with no welds, so the battery sits snug in a tray that will not fatigue or crack no matter how rough the road gets.
Features
- One-piece design, CNC-cut and formed from 10-gauge (.130") cold-roll steel
- No welded joints anywhere to fatigue and crack over time
- Snug fit sized to the compact Odyssey PC925 racing battery
- Light 4 lb tray that punches well above its weight
- Four 1/4" bolts with nylock nuts included to secure the battery
- Four 1/4" countersunk holes in the base — bolt it down or weld it in
Verify your battery is a PC925 before ordering, since each Artec tray is cut to one battery footprint. Like the rest of the line it ships in bare steel and needs paint or powder coat before install. For base fasteners, pair it with the 4-bolt battery mounting kit. Stepping up in capacity? The Odyssey PC1200 mount and PC1500 mount cover the bigger cases — see the whole Artec Industries collection here.
Specifications
Odyssey PC925 Battery Mount FAQs
Which battery is this tray cut for?
The Odyssey PC925, a compact racing battery popular in buggies and weight-sensitive builds. Each Artec battery tray is cut to a single battery footprint, so a PC1200 or PC1500 will not fit this one — matching mounts exist for those sizes.
Can I install it without welding?
Yes. Four 1/4" countersunk holes in the base let you bolt the tray to any flat surface — the Artec 4-bolt battery mounting kit supplies base hardware. Welding it directly in is also an option if you want a permanent, hardware-free install.
What is included and what do I still need?
The tray comes with four 1/4" bolts and nylock nuts to clamp the battery down. You still need base-mounting hardware (or a welder) and a coat of paint or powder coat — the mount ships in bare cold-roll steel and will rust if installed unfinished.
Multi-column
Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!
Financing Available
Buy now, pay later with PayPal Credit — available at checkout.
Contact Us
Have a question? Just send us an e-mail at support@nvmos.com
