Odyssey PC1200 Battery Mount
Warranty Information
Vendor warranty summary
Artec Industries Warranty
At a glance: Limited lifetime warranty against defects in material or workmanship
This is Artec Industries's warranty, not an NVMOS policy. We've summarized it in plain English to save you a search. The manufacturer's official terms always govern and can change without notice. Last reviewed on nvmos.com: October 4, 2026.
Coverage by product
| Product or component | Coverage |
|---|---|
| Artec Industries products | Limited lifetime, starting on delivery date |
| Returns of powder-coated products | Not returnable (manufacturer refund policy) |
What's covered
- Defects in material or workmanship for products bought, installed and used for their intended purpose
- Artec repairs or replaces a defective product at no charge (method at Artec's discretion)
What's not covered
- Misuse, abuse or neglect
- Improper installation
- Incorrect maintenance
How to make a Artec Industries warranty claim
- Call Artec at 855-278-3299 (Mon-Fri 9am-5pm MDT) to describe the issue
- Get an RMA number before shipping anything; packages without one are refused
Artec Industries contact: Phone: 855-278-3299 · Claim page / support
Bought it from NVMOS? Start with us.
Have your order number and a few photos of the issue ready, then call real humans at (920) 249-7744 or send us a message. We'll tell you whether the claim goes through us or straight to Artec Industries, and help it along either way.
Shop Artec Industries at NVMOS
Under Tailgate Plate - Aluminum, for Jeep Wrangler TJ/LJ 1997-2006
Coil Correction Plate for Jeep TJ Front Coil Springs (Pair)
Front and Rear Truss Package for Jeep Gladiator JT 2020+ (Free Front Axle Skid)
See all Artec Industries products, lead times and FAQs →
Disclaimer: The information on this page describes Artec Industries's own warranty policy. It is not a warranty offered by NVMOS (No Visible Means of Support LLC). Manufacturers update their terms at any time; we review these pages periodically, but the manufacturer's current official policy is the one that applies to your claim. Source: Artec Industries official warranty information. Last updated on nvmos.com: October 4, 2026. See our return policy for NVMOS's own terms.
About the brand
Artec Industries builds axle trusses, swap kits, suspension brackets and armor in North Salt Lake, Utah. NVMOS carries Artec reinforcements, control arms, skids, bumpers, fenders and battery mounts for Jeep, Toyota and Super Duty axles. It's for rigs running big tires and lockers that need housings and brackets that stay straight.
Based in: North Salt Lake, Utah · Made in: USA — most parts built in-house in Utah · Founded: 2003 · Lead time: Artec in-stock orders: 2–4 business days; NVMOS stock: 24–48 hours
Shop all 472 Artec IndustriesWarrantyAll brands
Warranty terms are set by Artec Industries, not NVMOS, and can change. Bought from us? Call (920) 249-7744 and we'll handle the claim with the brand.
Artec Industries built this mount to lock the compact Odyssey PC1200 racing battery down for good. Loose batteries chafe through cases and rattle themselves dead on corrugated roads — this tray fits the PC1200 snug so it simply cannot move. The mount is CNC-cut from 10-gauge (.130") cold-roll steel and formed into shape as a single piece, which means no welded seams to fatigue and fail. It suits engine-bay relocations, cargo-area installs, and second-battery additions on race and trail rigs alike.
Features
- One-piece CNC-cut and formed construction — stronger and lighter than a welded box
- 10-gauge (.130") cold-roll steel plate
- Snug fit sized to the Odyssey PC1200 footprint stops battery movement
- No welds anywhere on the mount to fatigue and crack
- Four 1/4" bolts with nylock nuts included to secure the battery
- Four 1/4" countersunk holes in the base for bolting, or weld it straight to your chassis
Make sure your battery is a PC1200 before ordering — all PC1200-series batteries share the same case, so any of them fit. The tray ships bare and needs paint or powder coat to keep rust off. Bolting it down instead of welding? Add the 4-bolt battery mounting kit for base hardware. Artec also cuts trays for the smaller Odyssey PC925 and larger PC1500, and the rest of the Artec Industries lineup is here.
Specifications
Odyssey PC1200 Battery Mount FAQs
Will this fit my Odyssey battery?
It is cut for the Odyssey PC1200 series, and every PC1200 variant is built on the same case, so any of them drops in snug. Larger or smaller Odyssey batteries need their own Artec tray — the PC925, PC1500, and PC2150 mounts cover those sizes.
Do I have to weld this in?
No. Four 1/4" countersunk holes in the base let you bolt the mount down — Artec's 4-bolt battery mounting kit supplies that hardware. If you prefer a permanent install, the bare-steel tray can be welded directly to your chassis or a fabricated shelf instead.
What do I need to do before installing it?
Coat it. The mount ships in bare cold-roll steel and will rust if it goes in unfinished, so paint or powder coat it first. The four 1/4" bolts and nylock nuts that clamp the battery are included; only base-mounting hardware is separate.
Multi-column
Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!
Financing Available
Buy now, pay later with PayPal Credit — available at checkout.
Contact Us
Have a question? Just send us an e-mail at support@nvmos.com
