Odyssey PC2150 Battery Mount
Warranty Information
Vendor warranty summary
Artec Industries Warranty
At a glance: Limited lifetime warranty against defects in material or workmanship
This is Artec Industries's warranty, not an NVMOS policy. We've summarized it in plain English to save you a search. The manufacturer's official terms always govern and can change without notice. Last reviewed on nvmos.com: October 4, 2026.
Coverage by product
| Product or component | Coverage |
|---|---|
| Artec Industries products | Limited lifetime, starting on delivery date |
| Returns of powder-coated products | Not returnable (manufacturer refund policy) |
What's covered
- Defects in material or workmanship for products bought, installed and used for their intended purpose
- Artec repairs or replaces a defective product at no charge (method at Artec's discretion)
What's not covered
- Misuse, abuse or neglect
- Improper installation
- Incorrect maintenance
How to make a Artec Industries warranty claim
- Call Artec at 855-278-3299 (Mon-Fri 9am-5pm MDT) to describe the issue
- Get an RMA number before shipping anything; packages without one are refused
Artec Industries contact: Phone: 855-278-3299 · Claim page / support
Bought it from NVMOS? Start with us.
Have your order number and a few photos of the issue ready, then call real humans at (920) 249-7744 or send us a message. We'll tell you whether the claim goes through us or straight to Artec Industries, and help it along either way.
Shop Artec Industries at NVMOS
Under Tailgate Plate - Aluminum, for Jeep Wrangler TJ/LJ 1997-2006
Coil Correction Plate for Jeep TJ Front Coil Springs (Pair)
Front and Rear Truss Package for Jeep Gladiator JT 2020+ (Free Front Axle Skid)
See all Artec Industries products, lead times and FAQs →
Disclaimer: The information on this page describes Artec Industries's own warranty policy. It is not a warranty offered by NVMOS (No Visible Means of Support LLC). Manufacturers update their terms at any time; we review these pages periodically, but the manufacturer's current official policy is the one that applies to your claim. Source: Artec Industries official warranty information. Last updated on nvmos.com: October 4, 2026. See our return policy for NVMOS's own terms.
About the brand
Artec Industries builds axle trusses, swap kits, suspension brackets and armor in North Salt Lake, Utah. NVMOS carries Artec reinforcements, control arms, skids, bumpers, fenders and battery mounts for Jeep, Toyota and Super Duty axles. It's for rigs running big tires and lockers that need housings and brackets that stay straight.
Based in: North Salt Lake, Utah · Made in: USA — most parts built in-house in Utah · Founded: 2003 · Lead time: Artec in-stock orders: 2–4 business days; NVMOS stock: 24–48 hours
Shop all 472 Artec IndustriesWarrantyAll brands
Warranty terms are set by Artec Industries, not NVMOS, and can change. Bought from us? Call (920) 249-7744 and we'll handle the claim with the brand.
The Odyssey PC2150 is one of the biggest batteries you can stuff into a trail rig, and a battery that heavy will destroy itself if it can shift around. This Artec Industries mount is CNC-cut from 10-gauge (.130") cold-roll steel and formed as a single piece, so there are no welds to fatigue and crack under vibration. A top hold-down plate clamps the PC2150 to the base, keeping it planted through hits, articulation, and washboard miles. It is built for relocations, cargo-area installs, and dual-battery setups where a flimsy factory clamp will not cut it.
Features
- One-piece design, CNC-cut and formed — lighter than a fabricated box and stronger, with no welds to crack
- Cut from 10-gauge (.130") cold-roll steel plate
- Sized specifically for the large Odyssey PC2150 racing battery
- Top hold-down plate clamps the battery so it cannot walk or wear itself out
- Six 1/4" bolts with nylock nuts included for the hold-down plate
- Countersunk 1/4" holes in the base for bolting down, or weld the mount directly in place
Confirm your battery is an Odyssey PC2150 before ordering — the tray is cut to that footprint. The mount ships in bare steel, so paint or powder coat it before install. Hardware to fasten the base to your rig is not included; grab the 4-bolt battery mounting kit, or step down to the Odyssey PC1500 mount or PC1200 mount if you run a smaller battery. Browse the full Artec Industries lineup for more fabrication-grade parts.
Specifications
Odyssey PC2150 Battery Mount FAQs
Which battery does this mount fit?
It is CNC-cut specifically for the Odyssey PC2150 racing battery, one of the largest batteries commonly run in off-road builds. Other Odyssey sizes will not sit snug in this tray — Artec makes matching mounts for the PC1500, PC1200, and PC925. Verify your battery model before ordering.
How does the battery stay put, and is hardware included?
A top hold-down plate clamps the battery to the base using the six included 1/4" bolts with nylock nuts. A small gap between the hold-down plate and the tray when everything is torqued down is normal. Hardware to fasten the mount itself to your vehicle is sold separately — Artec's 4-bolt battery mounting kit covers it, or you can weld the base directly in place.
Does the mount come painted?
No. It ships as bare cold-roll steel and must be painted, powder coated, or otherwise sealed before install to prevent rust. Coating it first is especially important for cargo-area or underhood relocations where moisture collects.
Multi-column
Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!
Financing Available
Buy now, pay later with PayPal Credit — available at checkout.
Contact Us
Have a question? Just send us an e-mail at support@nvmos.com
