Group 31 Optima Battery Mount
Warranty Information
Vendor warranty summary
Artec Industries Warranty
At a glance: Limited lifetime warranty against defects in material or workmanship
This is Artec Industries's warranty, not an NVMOS policy. We've summarized it in plain English to save you a search. The manufacturer's official terms always govern and can change without notice. Last reviewed on nvmos.com: October 4, 2026.
Coverage by product
| Product or component | Coverage |
|---|---|
| Artec Industries products | Limited lifetime, starting on delivery date |
| Returns of powder-coated products | Not returnable (manufacturer refund policy) |
What's covered
- Defects in material or workmanship for products bought, installed and used for their intended purpose
- Artec repairs or replaces a defective product at no charge (method at Artec's discretion)
What's not covered
- Misuse, abuse or neglect
- Improper installation
- Incorrect maintenance
How to make a Artec Industries warranty claim
- Call Artec at 855-278-3299 (Mon-Fri 9am-5pm MDT) to describe the issue
- Get an RMA number before shipping anything; packages without one are refused
Artec Industries contact: Phone: 855-278-3299 · Claim page / support
Bought it from NVMOS? Start with us.
Have your order number and a few photos of the issue ready, then call real humans at (920) 249-7744 or send us a message. We'll tell you whether the claim goes through us or straight to Artec Industries, and help it along either way.
Shop Artec Industries at NVMOS
Under Tailgate Plate - Aluminum, for Jeep Wrangler TJ/LJ 1997-2006
Coil Correction Plate for Jeep TJ Front Coil Springs (Pair)
Front and Rear Truss Package for Jeep Gladiator JT 2020+ (Free Front Axle Skid)
See all Artec Industries products, lead times and FAQs →
Disclaimer: The information on this page describes Artec Industries's own warranty policy. It is not a warranty offered by NVMOS (No Visible Means of Support LLC). Manufacturers update their terms at any time; we review these pages periodically, but the manufacturer's current official policy is the one that applies to your claim. Source: Artec Industries official warranty information. Last updated on nvmos.com: October 4, 2026. See our return policy for NVMOS's own terms.
About the brand
Artec Industries builds axle trusses, swap kits, suspension brackets and armor in North Salt Lake, Utah. NVMOS carries Artec reinforcements, control arms, skids, bumpers, fenders and battery mounts for Jeep, Toyota and Super Duty axles. It's for rigs running big tires and lockers that need housings and brackets that stay straight.
Based in: North Salt Lake, Utah · Made in: USA — most parts built in-house in Utah · Founded: 2003 · Lead time: Artec in-stock orders: 2–4 business days; NVMOS stock: 24–48 hours
Shop all 472 Artec IndustriesWarrantyAll brands
Warranty terms are set by Artec Industries, not NVMOS, and can change. Bought from us? Call (920) 249-7744 and we'll handle the claim with the brand.
The Group 31 (D31) is the biggest Optima you can buy, and its weight makes a proper hold-down non-negotiable — a shifting 60-pound battery cracks its case, wears through terminals, and dies young. This Artec Industries mount is CNC-cut from 10-gauge (.130") cold-roll steel as one rigid piece that locks the D31 down against articulation, hits, and highway vibration. Pressed-in PEM nuts keep the fastener threads captive, a window keeps the label readable, and the whole thing is a clean bolt-in upgrade over flimsy factory clamps for relocations and dual-battery setups.
Features
- CNC-cut from 10-gauge (.130") cold-roll steel in a rigid one-piece design
- Sized specifically to the large Group 31 Optima so the battery fits snug with zero movement
- Fits all Group 31 Optima colors
- Self-clinching (PEM) nuts pressed into the mount for clean, captive threads
- Open window lets you read the battery label and specs at a glance
- Six 1/4" bolts with nylock nuts included to secure the battery
- Bolt the base down through countersunk holes or weld it directly in place
Confirm you are running a Group 31 Optima — Group 34 and Group 25/35 cases are smaller and need their own trays. The mount ships in bare steel and must be coated before it goes in the rig. For base hardware add the 4-bolt battery mounting kit. Running other Optima sizes? Artec also cuts the Group 34 mount, Group 51 mount, and Group 25/35 mount — or browse all of Artec Industries.
Specifications
Group 31 Optima Battery Mount FAQs
Which battery does this fit?
The Group 31 (D31) Optima, the largest of the common Optima sizes, in any color. It is not sized for Group 34 or Group 25/35 batteries — those cases are smaller and would rattle in this tray, so use the matching Artec mount for each group instead.
Is it vehicle-specific?
No. It is a universal mount built around the battery footprint rather than any chassis, so it bolts into Jeep, Toyota, and full-size truck builds wherever you have or can build a flat surface. Some adaptation may be required depending on where you locate the battery.
What hardware comes with it and what finishing does it need?
Self-clinching PEM nuts are already pressed into the mount, and six 1/4" bolts with nylock nuts are included to strap the battery down. Base-mounting bolts are separate — Artec's 4-bolt battery mounting kit covers them — and the bare cold-roll steel needs paint or powder coat before installation to keep rust off.
Multi-column
Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!
Financing Available
Buy now, pay later with PayPal Credit — available at checkout.
Contact Us
Have a question? Just send us an e-mail at support@nvmos.com
