Group 51 Optima Battery Mount
Warranty Information
Vendor warranty summary
Artec Industries Warranty
At a glance: Limited lifetime warranty against defects in material or workmanship
This is Artec Industries's warranty, not an NVMOS policy. We've summarized it in plain English to save you a search. The manufacturer's official terms always govern and can change without notice. Last reviewed on nvmos.com: October 4, 2026.
Coverage by product
| Product or component | Coverage |
|---|---|
| Artec Industries products | Limited lifetime, starting on delivery date |
| Returns of powder-coated products | Not returnable (manufacturer refund policy) |
What's covered
- Defects in material or workmanship for products bought, installed and used for their intended purpose
- Artec repairs or replaces a defective product at no charge (method at Artec's discretion)
What's not covered
- Misuse, abuse or neglect
- Improper installation
- Incorrect maintenance
How to make a Artec Industries warranty claim
- Call Artec at 855-278-3299 (Mon-Fri 9am-5pm MDT) to describe the issue
- Get an RMA number before shipping anything; packages without one are refused
Artec Industries contact: Phone: 855-278-3299 · Claim page / support
Bought it from NVMOS? Start with us.
Have your order number and a few photos of the issue ready, then call real humans at (920) 249-7744 or send us a message. We'll tell you whether the claim goes through us or straight to Artec Industries, and help it along either way.
Shop Artec Industries at NVMOS
Under Tailgate Plate - Aluminum, for Jeep Wrangler TJ/LJ 1997-2006
Coil Correction Plate for Jeep TJ Front Coil Springs (Pair)
Front and Rear Truss Package for Jeep Gladiator JT 2020+ (Free Front Axle Skid)
See all Artec Industries products, lead times and FAQs →
Disclaimer: The information on this page describes Artec Industries's own warranty policy. It is not a warranty offered by NVMOS (No Visible Means of Support LLC). Manufacturers update their terms at any time; we review these pages periodically, but the manufacturer's current official policy is the one that applies to your claim. Source: Artec Industries official warranty information. Last updated on nvmos.com: October 4, 2026. See our return policy for NVMOS's own terms.
About the brand
Artec Industries builds axle trusses, swap kits, suspension brackets and armor in North Salt Lake, Utah. NVMOS carries Artec reinforcements, control arms, skids, bumpers, fenders and battery mounts for Jeep, Toyota and Super Duty axles. It's for rigs running big tires and lockers that need housings and brackets that stay straight.
Based in: North Salt Lake, Utah · Made in: USA — most parts built in-house in Utah · Founded: 2003 · Lead time: Artec in-stock orders: 2–4 business days; NVMOS stock: 24–48 hours
Shop all 472 Artec IndustriesWarrantyAll brands
Warranty terms are set by Artec Industries, not NVMOS, and can change. Bought from us? Call (920) 249-7744 and we'll handle the claim with the brand.
The Group 51 Optima is a compact spiral-cell battery that fits where full-size batteries will not, and this Artec Industries mount keeps it clamped down through the worst terrain. It is CNC-cut from 10-gauge (.130") cold-roll steel as a single piece — strength without the weight or the crack-prone welds of a fabricated box. Self-clinching PEM nuts are pressed into the mount so the hold-down bolts thread straight into the tray, and a cutout window keeps the battery's spec label readable after installation.
Features
- One-piece design, CNC-cut and formed from 10-gauge (.130") cold-roll steel
- Sized to the Group 51 Optima so the battery sits snug with no movement
- Pressed-in self-clinching (PEM) nuts — hold-down bolts thread into the mount, no loose backing nuts
- Cutout window keeps the battery spec label visible after install
- Six 1/4" bolts with nylock nuts included to secure the battery
- Bolt the base down or weld it directly in place
This tray is cut to the Optima Group 51 case specifically — standard flat-sided Group 51 batteries do not fit, so confirm you are running the Optima before ordering. The mount ships bare and needs paint or powder coat to stay rust-free. Base fasteners are covered by the 4-bolt battery mounting kit. Running a different Optima? See the Group 25/35 mount and Group 34 mount, or browse all of Artec Industries.
Specifications
Group 51 Optima Battery Mount FAQs
Does this fit any Group 51 battery?
No — it is cut to the Optima Group 51's spiral-cell case specifically. Standard flat-sided Group 51 batteries will not seat correctly in this tray. If you run a Group 25, 35, 34, or 31 Optima instead, Artec makes a matching mount for each.
What are the pressed-in PEM nuts for?
They are self-clinching threaded nuts pressed into the mount itself, so the six included 1/4" hold-down bolts thread directly into the tray. That means no loose backing nuts to hold with a second wrench — a real convenience when the mount is tucked into a tight corner of the rig.
How do I install and finish it?
Bolt the base down through its countersunk holes — Artec's 4-bolt battery mounting kit covers base hardware — or weld the mount directly in place. Either way, coat it first: the tray ships in bare cold-roll steel and needs paint or powder coat to prevent rust.
Multi-column
Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!
Financing Available
Buy now, pay later with PayPal Credit — available at checkout.
Contact Us
Have a question? Just send us an e-mail at support@nvmos.com
