Group 25/35 Optima Battery Mount
Warranty Information
Vendor warranty summary
Artec Industries Warranty
At a glance: Limited lifetime warranty against defects in material or workmanship
This is Artec Industries's warranty, not an NVMOS policy. We've summarized it in plain English to save you a search. The manufacturer's official terms always govern and can change without notice. Last reviewed on nvmos.com: October 4, 2026.
Coverage by product
| Product or component | Coverage |
|---|---|
| Artec Industries products | Limited lifetime, starting on delivery date |
| Returns of powder-coated products | Not returnable (manufacturer refund policy) |
What's covered
- Defects in material or workmanship for products bought, installed and used for their intended purpose
- Artec repairs or replaces a defective product at no charge (method at Artec's discretion)
What's not covered
- Misuse, abuse or neglect
- Improper installation
- Incorrect maintenance
How to make a Artec Industries warranty claim
- Call Artec at 855-278-3299 (Mon-Fri 9am-5pm MDT) to describe the issue
- Get an RMA number before shipping anything; packages without one are refused
Artec Industries contact: Phone: 855-278-3299 · Claim page / support
Bought it from NVMOS? Start with us.
Have your order number and a few photos of the issue ready, then call real humans at (920) 249-7744 or send us a message. We'll tell you whether the claim goes through us or straight to Artec Industries, and help it along either way.
Shop Artec Industries at NVMOS
Under Tailgate Plate - Aluminum, for Jeep Wrangler TJ/LJ 1997-2006
Coil Correction Plate for Jeep TJ Front Coil Springs (Pair)
Front and Rear Truss Package for Jeep Gladiator JT 2020+ (Free Front Axle Skid)
See all Artec Industries products, lead times and FAQs →
Disclaimer: The information on this page describes Artec Industries's own warranty policy. It is not a warranty offered by NVMOS (No Visible Means of Support LLC). Manufacturers update their terms at any time; we review these pages periodically, but the manufacturer's current official policy is the one that applies to your claim. Source: Artec Industries official warranty information. Last updated on nvmos.com: October 4, 2026. See our return policy for NVMOS's own terms.
About the brand
Artec Industries builds axle trusses, swap kits, suspension brackets and armor in North Salt Lake, Utah. NVMOS carries Artec reinforcements, control arms, skids, bumpers, fenders and battery mounts for Jeep, Toyota and Super Duty axles. It's for rigs running big tires and lockers that need housings and brackets that stay straight.
Based in: North Salt Lake, Utah · Made in: USA — most parts built in-house in Utah · Founded: 2003 · Lead time: Artec in-stock orders: 2–4 business days; NVMOS stock: 24–48 hours
Shop all 472 Artec IndustriesWarrantyAll brands
Warranty terms are set by Artec Industries, not NVMOS, and can change. Bought from us? Call (920) 249-7744 and we'll handle the claim with the brand.
One tray, two Optima sizes: this Artec Industries mount is cut to hold both the older Group 25 and the newer Group 35 Optima battery, and it clears every terminal configuration those batteries come in. Like the rest of Artec's battery mounts it is CNC-cut from 10-gauge (.130") cold-roll steel as a single formed piece, so the life source of your rig stays put without a welded seam that can fatigue and crack. Pressed-in PEM nuts and a label window round out a tray built for relocations and dual-battery setups.
Features
- Fits both the earlier Group 25 and current Group 35 Optima batteries
- Clears all terminal configurations — no interference with posts or cables
- One-piece design, CNC-cut and formed from 10-gauge (.130") cold-roll steel
- Self-clinching (PEM) nuts pressed into the mount for clean, captive threads
- Cutout window keeps the battery spec label readable after install
- Five 1/4" bolts with nylock nuts included to secure the battery
- Bolt-in through countersunk base holes or weld directly in place
Confirm your battery is a Group 25 or 35 Optima — the tray is cut to that spiral-cell case and will not suit other groups. It ships bare, so paint or powder coat it before install, and add the 4-bolt battery mounting kit if you are bolting rather than welding. For other Optima sizes see the Group 51 mount and Group 31 mount, or shop the full Artec Industries lineup.
Specifications
Group 25/35 Optima Battery Mount FAQs
Will it fit my Optima's terminal layout?
Yes. The tray is designed to clear all terminal configurations found on Group 25 and Group 35 Optima batteries, so posts and cable ends stay unobstructed. It fits both the older Group 25 and the newer Group 35 case — one mount covers either battery.
Do the hold-down bolts need nuts behind the tray?
No. Self-clinching PEM nuts are pressed into the mount, so the five included 1/4" bolts thread directly into the tray itself. Nylock nuts are also included. That keeps installation simple even when the back of the mount is inaccessible.
What else do I need to complete the install?
A coating and base hardware. The mount ships in bare cold-roll steel and must be painted or powder coated to prevent rust. To fasten the base to your rig, use Artec's 4-bolt battery mounting kit through the countersunk holes, or weld the tray directly in place.
Multi-column
Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!
Financing Available
Buy now, pay later with PayPal Credit — available at checkout.
Contact Us
Have a question? Just send us an e-mail at support@nvmos.com
