Charvonia Design Billet Bed Tie-Downs - Tacoma, Tundra & Super Duty
Warranty Information
Vendor warranty summary
Charvonia Design Warranty
At a glance: Lifetime on materials and workmanship, 1 year on finishes
This is Charvonia Design's warranty, not an NVMOS policy. We've summarized it in plain English to save you a search. The manufacturer's official terms always govern and can change without notice. Last reviewed on nvmos.com: October 4, 2026.
Coverage by product
| Product or component | Coverage |
|---|---|
| Tie-down anchors and other products (materials and workmanship) | Lifetime of the product from retail purchase |
| All finishes | 1 year |
- Original purchaser only — coverage does not transfer if you sell it.
- Keep your NVMOS order confirmation — proof of purchase is required.
What's covered
- Defects in materials and workmanship on new, unused products
- Charvonia repairs or replaces the defective part at its discretion
What's not covered
- Misuse, abuse, negligence, accidents and normal wear
- Used products
- Parts that were repaired, altered or modified
- Use with non-genuine parts
- Labor costs or other damages
- Products bought from unauthorized sellers (e.g. eBay, Amazon) may not be covered
How to make a Charvonia Design warranty claim
- Contact Charvonia Design through the website contact form (email is their preferred channel)
- Provide proof of purchase
- Get an RMA number before sending anything
- Ship the item prepaid to Charvonia Design in Huntersville, NC
Charvonia Design contact: Claim page / support
Bought it from NVMOS? Start with us.
Have your order number and a few photos of the issue ready, then call real humans at (920) 249-7744 or send us a message. We'll tell you whether the claim goes through us or straight to Charvonia Design, and help it along either way.
Shop Charvonia Design at NVMOS
See all Charvonia Design products, lead times and FAQs →
Disclaimer: The information on this page describes Charvonia Design's own warranty policy. It is not a warranty offered by NVMOS (No Visible Means of Support LLC). Manufacturers update their terms at any time; we review these pages periodically, but the manufacturer's current official policy is the one that applies to your claim. Source: Charvonia Design official warranty information. Last updated on nvmos.com: October 4, 2026. See our return policy for NVMOS's own terms.
About the brand
Charvonia Design machines billet aluminum tie-down anchors in North Carolina. NVMOS carries their vehicle-specific bed anchors, rail tie-downs, D-ring kits and battery tie-downs for Toyota, Ford, Ram, GM, Nissan and Jeep trucks, built for people who haul often and want anchors stronger than the factory pieces.
Based in: North Carolina · Made in: USA (North Carolina) · Founded: 2015 · Lead time: In-stock items ship in 24–48 hours
Shop all 40 Charvonia DesignWarrantyAll brands
Warranty terms are set by Charvonia Design, not NVMOS, and can change. Bought from us? Call (920) 249-7744 and we'll handle the claim with the brand.
These billet bed tie-downs replace the stock cleats in your truck bed with machined anchors meant for strapping down heavy, awkward loads like dirt bikes. The inside edges are radiused so ratchet straps and rope do not get cut or frayed, and a patented center slot keeps a strap from walking out of the anchor while you cinch it down. You can also run bungee cord or rope through them, so one set of anchors covers most of the ways people actually tie things down.
Fitment
Listed for the Toyota Tacoma, Toyota Tundra and Ford Super Duty trucks. The vendor does not publish model years or bed configurations on this listing, so check your truck against the vendor's fitment before ordering or ask us and we will look it up with you. Colors offered here are blue powdercoat and gray powdercoat.
Install notes
The vendor describes installation as a matter of minutes and suitable for a DIY owner, and an installation video is available on the vendor's product page.
Questions before you order?
Fitment questions are easier to settle before the box ships. Call or text Carl & Anton at (920) 249-7744 or use the chat — real humans in Sheboygan, Wisconsin, not a call center.
Specifications
Charvonia Design Billet Bed Tie-Downs FAQs
Which model years do these fit?
The vendor lists Tacoma, Tundra and Super Duty but does not give years on this product. Contact us with your year and bed type and we will confirm before you order.
Are they hard to install?
The vendor calls them a quick install a DIY owner can handle, and there is an installation video on the vendor's product page.
What can I tie down with them?
Ratchet straps, bungee cords or rope. The center slot holds a strap in place, and the radiused edges are there to avoid cutting it.
What colors are available here?
Blue powdercoat and gray powdercoat.
Multi-column
Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!
Financing Available
Buy now, pay later with PayPal Credit — available at checkout.
Contact Us
Have a question? Just send us an e-mail at support@nvmos.com
