Rivnuts (Pack of 4)
Warranty Information
Vendor warranty summary
Charvonia Design Warranty
At a glance: Lifetime on materials and workmanship, 1 year on finishes
This is Charvonia Design's warranty, not an NVMOS policy. We've summarized it in plain English to save you a search. The manufacturer's official terms always govern and can change without notice. Last reviewed on nvmos.com: October 4, 2026.
Coverage by product
| Product or component | Coverage |
|---|---|
| Tie-down anchors and other products (materials and workmanship) | Lifetime of the product from retail purchase |
| All finishes | 1 year |
- Original purchaser only — coverage does not transfer if you sell it.
- Keep your NVMOS order confirmation — proof of purchase is required.
What's covered
- Defects in materials and workmanship on new, unused products
- Charvonia repairs or replaces the defective part at its discretion
What's not covered
- Misuse, abuse, negligence, accidents and normal wear
- Used products
- Parts that were repaired, altered or modified
- Use with non-genuine parts
- Labor costs or other damages
- Products bought from unauthorized sellers (e.g. eBay, Amazon) may not be covered
How to make a Charvonia Design warranty claim
- Contact Charvonia Design through the website contact form (email is their preferred channel)
- Provide proof of purchase
- Get an RMA number before sending anything
- Ship the item prepaid to Charvonia Design in Huntersville, NC
Charvonia Design contact: Claim page / support
Bought it from NVMOS? Start with us.
Have your order number and a few photos of the issue ready, then call real humans at (920) 249-7744 or send us a message. We'll tell you whether the claim goes through us or straight to Charvonia Design, and help it along either way.
Shop Charvonia Design at NVMOS
See all Charvonia Design products, lead times and FAQs →
Disclaimer: The information on this page describes Charvonia Design's own warranty policy. It is not a warranty offered by NVMOS (No Visible Means of Support LLC). Manufacturers update their terms at any time; we review these pages periodically, but the manufacturer's current official policy is the one that applies to your claim. Source: Charvonia Design official warranty information. Last updated on nvmos.com: October 4, 2026. See our return policy for NVMOS's own terms.
About the brand
Charvonia Design machines billet aluminum tie-down anchors in North Carolina. NVMOS carries their vehicle-specific bed anchors, rail tie-downs, D-ring kits and battery tie-downs for Toyota, Ford, Ram, GM, Nissan and Jeep trucks, built for people who haul often and want anchors stronger than the factory pieces.
Based in: North Carolina · Made in: USA (North Carolina) · Founded: 2015 · Lead time: In-stock items ship in 24–48 hours
Shop all 28 Charvonia DesignWarrantyAll brands
Warranty terms are set by Charvonia Design, not NVMOS, and can change. Bought from us? Call (920) 249-7744 and we'll handle the claim with the brand.
Charvonia Design Rivnuts (Pack of 4) for Small and Medium Billet Tie Downs
Install your tie downs where traditional hardware will not work with Charvonia Design Rivnuts. This pack of 4 rivnuts is designed to help mount Charvonia Design Small Billet Tie Downs or Charvonia Design Medium Billet Tie Downs anywhere you do not have access to the backside of the panel. They are a simple, effective hardware solution for adding strong threaded mounting points in truck beds, panels, racks, and other hard-to-reach installation areas.
If your application does not allow you to reach behind the mounting surface, these Charvonia Design rivnuts make it possible to securely install your billet tie downs without requiring backside access. :contentReference[oaicite:1]{index=1}
Designed for Charvonia Design Billet Tie Down Installations
These Charvonia Design rivnuts are intended for use with Charvonia Design billet tie down products and are offered in two size options based on your tie down application. This gives you a more tailored hardware solution for mounting your tie downs correctly and securely. :contentReference[oaicite:2]{index=2}
Choose the Correct Size for Your Tie Down Application
- M6 – Fits Charvonia Design Small Billet Tie Downs
- M8 – Fits Charvonia Design Medium Billet Tie Downs
Ideal for Mounting Tie Downs Where You Cannot Access the Backside
One of the biggest advantages of these Charvonia Design mounting rivnuts is the ability to create secure mounting points in places where conventional nuts and bolts are difficult or impossible to use. They are especially helpful for truck bed panels, rack systems, and custom mounting surfaces where rear access is blocked or limited. :contentReference[oaicite:3]{index=3}
Perfect for Custom and Hard-to-Reach Install Locations
Whether you are adding new cargo anchors or building out a custom tie down setup, these rivnuts for billet tie downs help make installation possible in more locations while keeping the hardware clean and secure.
Rivnut Tool Required for Installation
Charvonia Design Rivnuts require the use of a rivnut installation tool or rivnut gun, which is not included. Be sure you have the correct installation tool before beginning your tie down install. :contentReference[oaicite:4]{index=4}
Simple Hardware Upgrade for Secure Mounting
Once installed properly, these rivnuts provide the threaded anchor point needed to mount compatible Charvonia Design tie downs in panels that would otherwise be difficult to use with standard hardware.
Why Choose Charvonia Design Rivnuts?
- Designed for Charvonia Design Small and Medium Billet Tie Downs
- Sold as a pack of 4
- Great for installations without backside panel access
- Available in M6 and M8 sizes
- Helps create secure threaded mounting points
- Ideal for truck bed, rack, and panel mounting applications
Complete Your Charvonia Design Tie Down Installation with the Right Hardware
If you need a secure way to mount your Charvonia Design billet tie downs in a location where the backside of the panel is not accessible, these Charvonia Design Rivnuts are the right solution. With size options for small billet tie downs and medium billet tie downs, this pack of 4 helps you complete your installation with the proper mounting hardware. :contentReference[oaicite:5]{index=5}
Multi-column
Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!
Financing Available
Buy now, pay later with PayPal Credit — available at checkout.
Contact Us
Have a question? Just send us an e-mail at support@nvmos.com
