Toyota 4Runner Link Kit Package: $75 Instant Rebate & Free Hat
This package bundles Artec Industries' aluminum rear link kit with track bar for the Toyota 4Runner (LK7401) with a $75 instant rebate and a free Artec hat. Lift a solid-rear-axle Toyota and the factory control arms leave the pinion angle off and the axle pushed sideways; this kit replaces all four rear arms and the track bar with double-adjustable 7075 aerospace-grade aluminum links on Rock Krawler Krawler Joints and JMX Pro rod ends, so you can set length, pinion angle, and axle centering on the vehicle. The polished aluminum sheds weight over steel arms and will not rust.
Features
- 7075 aerospace-grade polished aluminum links and track bar — light and rust-proof
- Double-adjustable ends (right-hand and left-hand thread) tune length on the truck
- Lower links ride on 1.25"-12 tpi Rock Krawler Krawler Joints
- 1.5" OD upper links use 7/8"-14 tpi Rock Krawler joints
- Adjustable track bar on 7/8"-14 tpi JMX Pro rod ends re-centers the lifted rear axle
- Includes jam nuts, spacers, and mounting hardware
- $75 instant rebate applied, plus a free Artec Industries hat
The link kit fits the 2003+ Toyota 4Runner (4th and 5th gen) and, per Artec, the 2007+ FJ Cruiser, 2008+ 200-Series Land Cruiser, and 2003+ Lexus GX on the same platform. Note the track bar is for lifted vehicles only — it is not used at stock height — and springs, shocks, limit straps, sway bar extensions, and extended brake lines are not included. The components also sell separately as the rear link kit and rear track bar; see more in the Artec Industries lineup and our control arms collection.
Specifications
Toyota 4Runner Link Kit Package: $75 Instant Rebate & Free Hat FAQs
Which vehicles does the link kit fit?
It fits the 2003+ Toyota 4Runner (4th and 5th generation), and per Artec also the 2007+ FJ Cruiser, 2008+ 200-Series Land Cruiser, and 2003+ Lexus GX that share the rear suspension layout. All four rear links and the track bar replace the factory pieces directly.
Do I need the track bar if my truck is at stock height?
No — Artec is explicit that the track bar is only used on lifted vehicles, where it re-centers the rear axle under the truck. At stock height you would run the factory bar. The four links can still be used to fine-tune geometry once you lift.
What else do I need to finish a lifted rear setup?
Springs, shocks, limit straps, sway bar extensions, and extended brake lines are not included and may be required depending on your lift height. The package covers the links, track bar, Rock Krawler joints, JMX Pro rod ends, jam nuts, spacers, and mounting hardware — plus the free hat and $75 rebate.
Multi-column
Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!
Financing Available
Buy now and pay later with Affirm.
Contact Us
Have a question? Just send us an e-mail at support@nvmos.com
