Venture LITE Front Bumper for Toyota 4Runner 5th Gen 2014-2024
Warranty Information
Vendor warranty summary
Artec Industries Warranty
At a glance: Limited lifetime warranty against defects in material or workmanship
This is Artec Industries's warranty, not an NVMOS policy. We've summarized it in plain English to save you a search. The manufacturer's official terms always govern and can change without notice. Last reviewed on nvmos.com: October 4, 2026.
Coverage by product
| Product or component | Coverage |
|---|---|
| Artec Industries products | Limited lifetime, starting on delivery date |
| Returns of powder-coated products | Not returnable (manufacturer refund policy) |
What's covered
- Defects in material or workmanship for products bought, installed and used for their intended purpose
- Artec repairs or replaces a defective product at no charge (method at Artec's discretion)
What's not covered
- Misuse, abuse or neglect
- Improper installation
- Incorrect maintenance
How to make a Artec Industries warranty claim
- Call Artec at 855-278-3299 (Mon-Fri 9am-5pm MDT) to describe the issue
- Get an RMA number before shipping anything; packages without one are refused
Artec Industries contact: Phone: 855-278-3299 · Claim page / support
Bought it from NVMOS? Start with us.
Have your order number and a few photos of the issue ready, then call real humans at (920) 249-7744 or send us a message. We'll tell you whether the claim goes through us or straight to Artec Industries, and help it along either way.
Shop Artec Industries at NVMOS
Under Tailgate Plate - Aluminum, for Jeep Wrangler TJ/LJ 1997-2006
Coil Correction Plate for Jeep TJ Front Coil Springs (Pair)
Front and Rear Truss Package for Jeep Gladiator JT 2020+ (Free Front Axle Skid)
See all Artec Industries products, lead times and FAQs →
Disclaimer: The information on this page describes Artec Industries's own warranty policy. It is not a warranty offered by NVMOS (No Visible Means of Support LLC). Manufacturers update their terms at any time; we review these pages periodically, but the manufacturer's current official policy is the one that applies to your claim. Source: Artec Industries official warranty information. Last updated on nvmos.com: October 4, 2026. See our return policy for NVMOS's own terms.
About the brand
Artec Industries builds axle trusses, swap kits, suspension brackets and armor in North Salt Lake, Utah. NVMOS carries Artec reinforcements, control arms, skids, bumpers, fenders and battery mounts for Jeep, Toyota and Super Duty axles. It's for rigs running big tires and lockers that need housings and brackets that stay straight.
Based in: North Salt Lake, Utah · Made in: USA — most parts built in-house in Utah · Founded: 2003 · Lead time: Artec in-stock orders: 2–4 business days; NVMOS stock: 24–48 hours
Shop all 472 Artec IndustriesWarrantyAll brands
Warranty terms are set by Artec Industries, not NVMOS, and can change. Bought from us? Call (920) 249-7744 and we'll handle the claim with the brand.
Not every 4Runner needs a winch — the Venture LITE is Artec’s answer for 5th Gen owners who want the Venture look, approach angle, and recovery strength without carrying a winch mount they will never load. It replaces the factory center bumper section with a layered steel design: 3/4″ recovery tabs, a 3/16″ internal frame, and a 1/8″ exterior skin that keeps weight off the nose. Like the full Venture, it was drawn from factory CAD files, so panel gaps stay tight.
Features
- Low-profile center-section replacement that follows the factory lines
- LITE build deletes the winch mount and uses a 1/8″ steel skin to cut weight
- 3/4″-thick recovery tabs positioned high for ground clearance
- 3/16″ internal steel frame with large gussets tying directly to the frame
- Frame plate hooks let you hang the bumper during mock-up and install
- Accepts a single-row 30″ Rigid SR-series light bar
- Designed off factory CAD files; made in the USA
Fits 5th Gen Toyota 4Runners from 2014 to 2024; not compatible with Limited trims, and it cannot carry a winch — if you need one, get the standard 4Runner 5G Venture Bumper instead. Either way, stiffen the factory frame plates with the 5G Front Frame Gussets before hard recovery use, and paint or coat the bare-steel version before installation. See the rest of our front bumper lineup.
Complete your Toyota 4Runner build
More parts that fit your Toyota 4Runner and pair well with this one — matched and ready to install.
$714.99
$20.70
$82.80
$16.00
$95.00
More for your Toyota 4Runner
Picked from the 935 parts we carry for the Toyota 4Runner, matched to 2014–2024 model years. Check the years and trim in each title — or call us and we’ll confirm fit.
Specifications
Venture LITE Front Bumper for Toyota 4Runner 5th Gen 2014-2024 FAQs
Can I add a winch to the Venture LITE later?
No. The LITE deletes the winch mounting structure entirely to save weight, and there is no provision to retrofit one. If a winch is anywhere in your plans, start with the standard 4Runner 5G Venture Bumper, which shares the same styling with a full winch mount.
Which 4Runners does it fit?
5th Generation Toyota 4Runners from 2014 through 2024. It is not compatible with Limited trim models. It replaces the factory center bumper section and mounts with frame plate hooks and gussets that tie into the frame.
Does it come ready to bolt on, or do I need to finish it?
The black textured powder coat version is ready to install. The bare steel version needs paint or powder coat before it goes on the truck — bare steel will surface-rust quickly if left unfinished. Recovery tabs are 3/4″ steel either way.
Multi-column
Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!
Financing Available
Buy now, pay later with PayPal Credit — available at checkout.
Contact Us
Have a question? Just send us an e-mail at support@nvmos.com
