Sentinel Hoop Front Bumper for Jeep Wrangler JK, JL & Gladiator JT - Black Powder Coat
Warranty Information
Vendor warranty summary
Artec Industries Warranty
At a glance: Limited lifetime warranty against defects in material or workmanship
This is Artec Industries's warranty, not an NVMOS policy. We've summarized it in plain English to save you a search. The manufacturer's official terms always govern and can change without notice. Last reviewed on nvmos.com: October 4, 2026.
Coverage by product
| Product or component | Coverage |
|---|---|
| Artec Industries products | Limited lifetime, starting on delivery date |
| Returns of powder-coated products | Not returnable (manufacturer refund policy) |
What's covered
- Defects in material or workmanship for products bought, installed and used for their intended purpose
- Artec repairs or replaces a defective product at no charge (method at Artec's discretion)
What's not covered
- Misuse, abuse or neglect
- Improper installation
- Incorrect maintenance
How to make a Artec Industries warranty claim
- Call Artec at 855-278-3299 (Mon-Fri 9am-5pm MDT) to describe the issue
- Get an RMA number before shipping anything; packages without one are refused
Artec Industries contact: Phone: 855-278-3299 · Claim page / support
Bought it from NVMOS? Start with us.
Have your order number and a few photos of the issue ready, then call real humans at (920) 249-7744 or send us a message. We'll tell you whether the claim goes through us or straight to Artec Industries, and help it along either way.
Shop Artec Industries at NVMOS
Under Tailgate Plate - Aluminum, for Jeep Wrangler TJ/LJ 1997-2006
Coil Correction Plate for Jeep TJ Front Coil Springs (Pair)
Front and Rear Truss Package for Jeep Gladiator JT 2020+ (Free Front Axle Skid)
See all Artec Industries products, lead times and FAQs →
Disclaimer: The information on this page describes Artec Industries's own warranty policy. It is not a warranty offered by NVMOS (No Visible Means of Support LLC). Manufacturers update their terms at any time; we review these pages periodically, but the manufacturer's current official policy is the one that applies to your claim. Source: Artec Industries official warranty information. Last updated on nvmos.com: October 4, 2026. See our return policy for NVMOS's own terms.
About the brand
Artec Industries builds axle trusses, swap kits, suspension brackets and armor in North Salt Lake, Utah. NVMOS carries Artec reinforcements, control arms, skids, bumpers, fenders and battery mounts for Jeep, Toyota and Super Duty axles. It's for rigs running big tires and lockers that need housings and brackets that stay straight.
Based in: North Salt Lake, Utah · Made in: USA — most parts built in-house in Utah · Founded: 2003 · Lead time: Artec in-stock orders: 2–4 business days; NVMOS stock: 24–48 hours
Shop all 472 Artec IndustriesWarrantyAll brands
Warranty terms are set by Artec Industries, not NVMOS, and can change. Bought from us? Call (920) 249-7744 and we'll handle the claim with the brand.
For a front end that is finished, protected, and ready to work the day it arrives, this is the top of the Sentinel line: Artec Industries' 3/16" steel front bumper with an integrated stinger hoop, delivered in textured black powder coat over zinc primer. It fits the Jeep Wrangler JK (2007-2018), Wrangler JL (2018+), and Gladiator JT (2020+), tucking close to the frame so you gain approach angle instead of losing it. The hoop covers the grille on climbs and gives lights and accessories a solid home, while reinforced recovery points and a recessed winch mount option handle the recovery side of the job.
Features
- 3/16" steel plate body with integrated stinger hoop
- Textured black powder coat over zinc primer for long-term corrosion resistance
- Hoop protects the grille and creates an overhead mounting point
- Frame-tucked, high-clearance profile improves approach angle
- Reinforced recovery points built into the structure
- Integrated cube-light mounts
- Recessed winch mount option with fairlead opening (winch plate sold separately)
- Bolts to the factory frame horns, no drilling
Confirm your Jeep is a 2007-2018 JK, 2018+ JL, or 2020+ JT and installation is a straightforward bolt-on. Prefer a lower profile? The hoopless Sentinel in black powder coat keeps the same finish, and the bare-steel hoop version saves money if you finish parts yourself. Add the JL-JT Steel Bumper Winch Plate for winching, and see the rest of our front bumpers.
Complete your Jeep Gladiator build
More parts that fit your Jeep Gladiator and pair well with this one — matched and ready to install.
$904.99
$131.99
$175.99
$142.99
$12.99
More for your Jeep Gladiator
Picked from the 764 parts we carry for the Jeep Gladiator. Check the years and trim in each title — or call us and we’ll confirm fit.
Specifications
Sentinel Hoop Front Bumper for Jeep Wrangler JK, JL & Gladiator JT FAQs
Is this bumper ready to install out of the box?
Yes. It arrives finished in textured black powder coat over a zinc primer, so there is no painting or prep — bolt it to the factory frame horns and go. No drilling is required, and the install is manageable with basic hand tools.
Which Jeeps does the hoop version fit?
The same range as every Sentinel front bumper: Jeep Wrangler JK/JKU (2007-2018), Wrangler JL/JLU (2018 and newer), and Gladiator JT (2020 and newer). The hoop does not change fitment — it adds grille protection and an overhead mounting point on top of the standard design.
Does it come with a winch plate?
No, the winch plate is sold separately. The bumper is winch-ready with a recessed mount location behind its fairlead opening, so pair it with the JL-JT Steel Bumper Winch Plate when you add a winch. Until then the recovery points still handle strap recoveries.
Multi-column
Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!
Financing Available
Buy now, pay later with PayPal Credit — available at checkout.
Contact Us
Have a question? Just send us an e-mail at support@nvmos.com
