Sentinel Front Bumper for Jeep Wrangler JK, JL & Gladiator JT - Black Powder Coat
Warranty Information
Vendor warranty summary
Artec Industries Warranty
At a glance: Limited lifetime warranty against defects in material or workmanship
This is Artec Industries's warranty, not an NVMOS policy. We've summarized it in plain English to save you a search. The manufacturer's official terms always govern and can change without notice. Last reviewed on nvmos.com: October 4, 2026.
Coverage by product
| Product or component | Coverage |
|---|---|
| Artec Industries products | Limited lifetime, starting on delivery date |
| Returns of powder-coated products | Not returnable (manufacturer refund policy) |
What's covered
- Defects in material or workmanship for products bought, installed and used for their intended purpose
- Artec repairs or replaces a defective product at no charge (method at Artec's discretion)
What's not covered
- Misuse, abuse or neglect
- Improper installation
- Incorrect maintenance
How to make a Artec Industries warranty claim
- Call Artec at 855-278-3299 (Mon-Fri 9am-5pm MDT) to describe the issue
- Get an RMA number before shipping anything; packages without one are refused
Artec Industries contact: Phone: 855-278-3299 · Claim page / support
Bought it from NVMOS? Start with us.
Have your order number and a few photos of the issue ready, then call real humans at (920) 249-7744 or send us a message. We'll tell you whether the claim goes through us or straight to Artec Industries, and help it along either way.
Shop Artec Industries at NVMOS
Under Tailgate Plate - Aluminum, for Jeep Wrangler TJ/LJ 1997-2006
Coil Correction Plate for Jeep TJ Front Coil Springs (Pair)
Front and Rear Truss Package for Jeep Gladiator JT 2020+ (Free Front Axle Skid)
See all Artec Industries products, lead times and FAQs →
Disclaimer: The information on this page describes Artec Industries's own warranty policy. It is not a warranty offered by NVMOS (No Visible Means of Support LLC). Manufacturers update their terms at any time; we review these pages periodically, but the manufacturer's current official policy is the one that applies to your claim. Source: Artec Industries official warranty information. Last updated on nvmos.com: October 4, 2026. See our return policy for NVMOS's own terms.
About the brand
Artec Industries builds axle trusses, swap kits, suspension brackets and armor in North Salt Lake, Utah. NVMOS carries Artec reinforcements, control arms, skids, bumpers, fenders and battery mounts for Jeep, Toyota and Super Duty axles. It's for rigs running big tires and lockers that need housings and brackets that stay straight.
Based in: North Salt Lake, Utah · Made in: USA — most parts built in-house in Utah · Founded: 2003 · Lead time: Artec in-stock orders: 2–4 business days; NVMOS stock: 24–48 hours
Shop all 472 Artec IndustriesWarrantyAll brands
Warranty terms are set by Artec Industries, not NVMOS, and can change. Bought from us? Call (920) 249-7744 and we'll handle the claim with the brand.
Artec Industries builds the Sentinel Front Bumper for Jeep owners who want real steel protection without giving up approach angle. Cut from 3/16" plate and shaped to sit close against the frame of the Wrangler JK (2007-2018), Wrangler JL (2018+), and Gladiator JT (2020+), it clears obstacles the wide factory bumper drags across. Recovery points are reinforced and welded into the structure, cube-light mounts sit front and center, and a recessed winch mount option puts the winch behind a fairlead opening instead of hanging it out front. This version arrives finished in textured black powder coat over a zinc primer, so it goes straight from the box to the frame with no paint work.
Features
- CNC-cut 3/16" steel plate body
- Tight, frame-hugging profile improves approach angle
- Textured black powder coat over zinc primer resists rust and trail rash
- Reinforced recovery points for straps and snatch recoveries
- Integrated cube-light mounts
- Recessed winch mount option behind a fairlead opening (winch plate sold separately)
- No-drill bolt-on install to the factory frame horns
Check that your Jeep is a 2007-2018 JK, 2018+ JL, or 2020+ JT and it bolts to the factory frame horns with basic hand tools. Planning a winch? Pair it with the JL-JT Steel Bumper Winch Plate; running without one, the matching black block-off plate seals the opening. Want more front-end coverage? See the Sentinel with hoop in black powder coat, or browse the full front bumpers collection.
Complete your Jeep Gladiator build
More parts that fit your Jeep Gladiator and pair well with this one — matched and ready to install.
$614.99
$131.99
$175.99
$142.99
$12.99
More for your Jeep Gladiator
Picked from the 764 parts we carry for the Jeep Gladiator. Check the years and trim in each title — or call us and we’ll confirm fit.
Specifications
Sentinel Front Bumper for Jeep Wrangler JK, JL & Gladiator JT FAQs
Do I need to paint this bumper?
No. This version of the Sentinel ships finished in textured black powder coat applied over a zinc primer, so it is protected against corrosion out of the box. Bolt it on and go — only the bare-steel Sentinel needs paint or powder coat before use.
Which Jeep models does it fit?
The Sentinel fits the Jeep Wrangler JK/JKU (2007-2018), Wrangler JL/JLU (2018 and newer), and Gladiator JT (2020 and newer). It mounts to the factory frame horns with no drilling required, so installation is a bolt-on job with basic hand tools.
Is a winch mount included?
The bumper is winch-ready with a recessed mount location and a fairlead opening, but the winch plate is sold separately. Add the JL-JT Steel Bumper Winch Plate to run a winch, or fit the matching black powder coat block-off plate for a clean sealed face if you are skipping the winch.
Multi-column
Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!
Financing Available
Buy now, pay later with PayPal Credit — available at checkout.
Contact Us
Have a question? Just send us an e-mail at support@nvmos.com
