C4 Fabrication Tacoma Rock Runner Front Bumper / 3rd Gen / 2016+
Warranty Information
C4 FAB LLC will warranty all products produced and distributed by C4 FAB LLC for ONE YEAR after the shipping date of the product. This warranty will include any issues caused by manufacture defects including failing or broken welds and/or failing or broken hardware and mechanical parts that are shipped with the product. C4 FAB LLC DOES NOT WARRANTY POWDER COAT FINISH ON ANY PRODUCTS THAT ARE SHIPPED POWDER COATED OR CAN BE ORDERED WITH THE OPTION TO BE POWDER COATED. Products will only be warrantied if installed in accordance with C4 FAB LLC installation guidelines. Any modification to the original product design, functionality, or use, by said customer voids all warranty eligibility. It is the sole discretion of C4 FAB LLC to determine warranty eligibility. Our One Year Warranty is effective for as long as the original retail purchaser owns the product. This warranty terminates when the original retail purchaser sells or otherwise transfers the product to any other person.
C4 FAB LLC reserves the right to remedy defects in workmanship or materials in one of three ways.
- C4 FAB LLC will issue replacements components to the customer that deems defective or inconsistent with the quality of its brand.
- C4 FAB LLC will elect to issue the customer a full or partial refund for the defects or damages of the product.
- C4 FAB LLC will pay the cost of having a shop near the customer perform repairs on the product if it is deemed that this option is more affordable and will satisfy the customers warranty request.
This warranty does not cover defects caused by normal wear and tear, rust, scratches, accidents, or products used for racing/competition. This warranty does not cover damage to the finish of powder coated products. C4 FAB LLC is not responsible for defects that are not in control of C4 FAB LLC such as, trail damage, highway damage or car accidents, overloading, incorrect assembly, poor maintenance practices or damaging acts of god such as extreme weather e.g.: hail, flooding, lightning, extreme wind.
REPLACEMENT OF A DEFECTIVE PRODUCT OR THE ISSUANCE OF A REFUND (AS DETERMINED BY C4 FAB LLC) IS A PURCHASER’S EXCLUSIVE REMEDY UNDER THIS WARRANTY. ANY AND ALL DAMAGE TO A PURCHASER’S VEHICLE, CARGO AND/OR TO ANY OTHER PERSON OR PROPERTY IS EXCLUDED.
2016+ Tacoma (3rd Gen) Rock Runner Front Bumper
-
Installation:
- Requires cutting of the plastic bumper.
- If selecting the cross member delete option (special request; $699 add-on), the factory cross member must be cut out and replaced with the included replacement cross member, rock runner front skid plate, and power steering relocation kit.
-
Weights:
- Front with Plate Sides: 78 lbs
- Front with Tube Sides: 73 lbs
-
Features:
- Modular, 3-piece design with bolt-on wings.
- Comes with winch cover plate and bridge skid, compatible with current skid plates and factory cross member.
- Frame support brackets are included.
- Cutouts in front of the bumper allow winch lever access.
-
Compatibility:
- Fits most winches in the 8k-10k size range. Winches with relocateable electrical control boxes are recommended. Integrated control box winches may require trimming of the grille support brackets. (Smittybilt X20, Warn VR series are common fits).
- We recommend synthetic rope and a hawse style fairlead for the best fit and functionality. Roller fairleads may be too large for the recessed mounting plate.
-
Construction:
- Made from 11ga laser cut P&O steel with 3/16" thick mounting plates and winch plate.
- 3/4" thick D-ring tabs fully welded front and back.
-
Additional Notes:
- Bull bar is not compatible with Toyota Safety Sense.
-
Finish:
- Ships bare steel; powder coat finish is not available. Product must be painted or powder-coated to prevent rusting.
Multi-column
Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!
Financing Available
Buy now and pay later with Affirm.
Contact Us
Have a question? Just send us an e-mail at support@nvmos.com
