Small Parts - Replacement End Cap Set Upper Bar
Warranty Information
Vendor warranty summary
Big Days Truck Accessories Warranty
At a glance: Limited lifetime on Chase Rack base and racks, 3 years on mounts/accessories, 1 year on paint and finish
This is Big Days Truck Accessories's warranty, not an NVMOS policy. We've summarized it in plain English to save you a search. The manufacturer's official terms always govern and can change without notice. Last reviewed on nvmos.com: October 4, 2026.
Coverage by product
| Product or component | Coverage |
|---|---|
| Chase Rack System base, Trailbreaker Truck Bed Rack, Trailhead Hitch Rack | Limited lifetime |
| All mounts and all other accessories | 3 years |
| Paint and finish defects (all Big Days and Boundry products) | 1 year |
- Original purchaser only — coverage does not transfer if you sell it.
- Keep your NVMOS order confirmation — proof of purchase is required.
What's covered
- Defects in materials or workmanship from the factory
- Big Days repairs or replaces the faulty part with no charge for parts or labor
- Big Days may choose to refund up to the original purchase price instead
- During the first year Big Days pays the return shipping; after that the buyer pays
What's not covered
- Normal wear such as scratches, dents, tears or surface oxidation
- Fading, UV damage, extreme weather, impacts and theft
- Commercial use or accidents
- Repairs or modifications not done or approved by Big Days
- Wrong assembly or going over the rated load capacity
- Products bought second-hand
- Damage to other (non-Big Days) gear carried on the rack
How to make a Big Days Truck Accessories warranty claim
- Start with the dealer you bought from, or contact Big Days directly
- Have your original invoice or receipt ready
- Describe the defect in detail (photos help)
- Follow the return instructions Big Days gives you
- Product registration on the Big Days site is optional and is used for safety notices
Big Days Truck Accessories contact: Phone: 385-472-4698 · Email: sales@Big-Days.com · Claim page / support
Bought it from NVMOS? Start with us.
Have your order number and a few photos of the issue ready, then call real humans at (920) 249-7744 or send us a message. We'll tell you whether the claim goes through us or straight to Big Days Truck Accessories, and help it along either way.
Shop Big Days Truck Accessories at NVMOS
See all Big Days Truck Accessories products, lead times and FAQs →
Disclaimer: The information on this page describes Big Days Truck Accessories's own warranty policy. It is not a warranty offered by NVMOS (No Visible Means of Support LLC). Manufacturers update their terms at any time; we review these pages periodically, but the manufacturer's current official policy is the one that applies to your claim. Source: Big Days Truck Accessories official warranty information. Last updated on nvmos.com: October 4, 2026. See our return policy for NVMOS's own terms.
About the brand
Big Days builds the Chase Rack in Orem, Utah: a modular rack that rides inside your pickup bed and carries bikes, e-bikes, dirt bikes and skis. NVMOS carries complete Chase Rack builds, moto and bike mounts, headache racks and accessories for full-size and mid-size trucks. For riders who are done with tailgate pads.
Based in: Orem, Utah · Made in: USA (Utah) · Lead time: Built to order: 5–10 business days plus transit
Shop all 50 Big Days Truck AccessoriesWarrantyAll brands
Warranty terms are set by Big Days Truck Accessories, not NVMOS, and can change. Bought from us? Call (920) 249-7744 and we'll handle the claim with the brand.
End caps disappear — one snags on a strap, gets knocked loose on a rough two-track, or walks off during a rack teardown. This set puts the upper bar of your Big Days chase rack back to factory: two rubber end caps shaped to match the diamond-profile upper bar, covering the exposed bar ends and restoring the finished look of the crossbar.
Features
- Direct replacement end caps for the upper diamond-shape bar
- Set of two — one for each end of the bar
- Rubber construction, shaped to the diamond profile
- Covers open bar ends for a clean, finished crossbar edge
- Fits the upper bar on Big Days Chase Rack System builds
These caps are specific to the diamond-shape upper bar, so double-check which section of your rack needs attention before ordering. For other serviceable pieces — clamp kits, T-nut kits, the lower beam — browse the full lineup of rack small parts, and a bottle of textured-black touch-up paint handles scuffs while you're at it. It's the cheap way to keep a hard-used rack looking and working like it did on day one.
Specifications
Small Parts FAQs
Which bar do these end caps fit?
The upper diamond-shape bar on the Big Days Chase Rack System. The caps are shaped to that diamond profile, so confirm it's the upper bar — not another section of the rack — that needs new caps before ordering.
How many end caps come in a set?
Two rubber diamond-shape end caps — one for each end of the upper bar. A single set fully re-caps one upper bar, and if you've only lost one cap, you'll have a spare on hand for the next time a strap or branch claims one.
Are these the same caps that came on my rack?
Yes — this is Big Days' own replacement set for the upper diamond-shape bar, sold as a small part so you can service the rack instead of living with exposed bar ends. The rubber caps match the fit of the ones your Chase Rack System came with.
Multi-column
Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!
Financing Available
Buy now, pay later with PayPal Credit — available at checkout.
Contact Us
Have a question? Just send us an e-mail at support@nvmos.com
