ReadyLIFT 4" SST Lift Kit - Chevy Tahoe/Suburban & GMC Yukon 2015-2020 (Cast Al or Stamped Steel UCA)
Warranty Information
Vendor warranty summary
ReadyLIFT Warranty
At a glance: Defective parts replaced with no stated time limit; wear parts up to 1 year
This is ReadyLIFT's warranty, not an NVMOS policy. We've summarized it in plain English to save you a search. The manufacturer's official terms always govern and can change without notice. Last reviewed on nvmos.com: October 4, 2026.
Coverage by product
| Product or component | Coverage |
|---|---|
| Lift and leveling kit components | Lifetime replacement for defects (original buyer) |
| Wear parts: shocks, ball joints, heim joints, bushings, steering extensions | Up to 1 year |
| Discontinued, clearance or outlet products | Not covered |
- Original purchaser only — coverage does not transfer if you sell it.
What's covered
- Missing or defective components: if a part breaks, ReadyLIFT sends a new one
- ReadyLIFT may ask for the old part back at its own cost for analysis, without holding up the replacement
- Jeep SST and Terrain Flex kits are covered for recreational off-road use
What's not covered
- Off-road abuse (except Jeep SST and Terrain Flex kits)
- Discontinued, clearance and outlet items
- Labor, installation, surcharges and fees
- Resulting damage to the vehicle
How to make a ReadyLIFT warranty claim
- Call ReadyLIFT customer service to start a claim (7:30am-4pm MST)
- ReadyLIFT ships the replacement part, quickly where possible
ReadyLIFT contact: Phone: 800-549-4620 (toll free); 702-410-2300 · Claim page / support
Bought it from NVMOS? Start with us.
Have your order number and a few photos of the issue ready, then call real humans at (920) 249-7744 or send us a message. We'll tell you whether the claim goes through us or straight to ReadyLIFT, and help it along either way.
Shop ReadyLIFT at NVMOS
ReadyLIFT 8" Lift Kit - Toyota Tundra 2007-2021 W/ Bilstein Shocks
ReadyLIFT 1.5" Rear Add-A-Leaf Kit - Ford F-150
ReadyLIFT 7/8" Wheel Spacers W/ Studs - GM 1500
See all ReadyLIFT products, lead times and FAQs →
Disclaimer: The information on this page describes ReadyLIFT's own warranty policy. It is not a warranty offered by NVMOS (No Visible Means of Support LLC). Manufacturers update their terms at any time; we review these pages periodically, but the manufacturer's current official policy is the one that applies to your claim. Source: ReadyLIFT official warranty information. Last updated on nvmos.com: October 4, 2026. See our return policy for NVMOS's own terms.
About the brand
ReadyLIFT is an Ogden, Utah suspension brand built around more tire clearance with close-to-factory ride. NVMOS carries ReadyLIFT leveling kits, SST mid-lifts, Big Lift kits, rear blocks, control arms and wheel spacers for Ford, GM, Ram, Toyota and Jeep trucks.
Based in: Ogden, Utah · Founded: 2006 · Lead time: In-stock ships in 24–48 hrs
Shop all 565 ReadyLIFTWarrantyAll brands
Warranty terms are set by ReadyLIFT, not NVMOS, and can change. Bought from us? Call (920) 249-7744 and we'll handle the claim with the brand.
This ReadyLIFT SST kit gives 2015-2020 full-size GM SUVs 4 in of front lift and 3 in in the rear. It covers the Chevy Tahoe, Suburban and GMC Yukon, plus the Cadillac Escalade, in 2WD and 4WD. New tubular upper control arms do the front work, and the kit allows for a tire up to 33 in in diameter.
Why it works
- Tubular upper control arms replace the factory arms
- OEM-style cast rear blocks with press-in 10.9 grade hardware
- Solid mounting with even load distribution that will not deform or change shape
- No cutting or welding of OEM parts
- ReadyLIFT says it maintains factory ride
Fitment
- 2015-2020 Tahoe, Suburban, Yukon and Escalade, 2WD and 4WD
- Factory aluminum knuckle or stamped steel front suspension only
- Not for cast steel suspension or AWD vehicles
- Will not work with rear airbag suspension or Magneride applications
Questions before you order?
Fitment questions are easier to settle before the box ships. Call or text Carl & Anton at (920) 249-7744 or use the chat — real humans in Sheboygan, Wisconsin, not a call center.
Specifications
ReadyLIFT 4" SST Lift Kit FAQs
Does it fit AWD models?
No. It is not for use on AWD vehicles.
Will it work with Magneride?
No. It will not work with Magneride applications or with rear airbag suspension.
Which front suspension does it need?
Factory aluminum knuckle or stamped steel. It is not for cast steel.
Does it need cutting or welding?
No. The vendor lists no cutting of OEM parts or welding.
Multi-column
Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!
Financing Available
Buy now, pay later with PayPal Credit — available at checkout.
Contact Us
Have a question? Just send us an e-mail at support@nvmos.com
