ReadyLIFT 7/8" Wheel Spacers W/ Studs - GM 1500
For qualified buyers at checkout
Secure checkoutEncrypted payment
Warranty Information
Vendor warranty summary
ReadyLIFT Warranty
At a glance: Defective parts replaced with no stated time limit; wear parts up to 1 year
This is ReadyLIFT's warranty, not an NVMOS policy. We've summarized it in plain English to save you a search. The manufacturer's official terms always govern and can change without notice. Last reviewed on nvmos.com: October 4, 2026.
Coverage by product
| Product or component | Coverage |
|---|---|
| Lift and leveling kit components | Lifetime replacement for defects (original buyer) |
| Wear parts: shocks, ball joints, heim joints, bushings, steering extensions | Up to 1 year |
| Discontinued, clearance or outlet products | Not covered |
- Original purchaser only — coverage does not transfer if you sell it.
What's covered
- Missing or defective components: if a part breaks, ReadyLIFT sends a new one
- ReadyLIFT may ask for the old part back at its own cost for analysis, without holding up the replacement
- Jeep SST and Terrain Flex kits are covered for recreational off-road use
What's not covered
- Off-road abuse (except Jeep SST and Terrain Flex kits)
- Discontinued, clearance and outlet items
- Labor, installation, surcharges and fees
- Resulting damage to the vehicle
How to make a ReadyLIFT warranty claim
- Call ReadyLIFT customer service to start a claim (7:30am-4pm MST)
- ReadyLIFT ships the replacement part, quickly where possible
ReadyLIFT contact: Phone: 800-549-4620 (toll free); 702-410-2300 · Claim page / support
Bought it from NVMOS? Start with us.
Have your order number and a few photos of the issue ready, then call real humans at (920) 249-7744 or send us a message. We'll tell you whether the claim goes through us or straight to ReadyLIFT, and help it along either way.
Shop ReadyLIFT at NVMOS
ReadyLIFT 8" Lift Kit - Toyota Tundra 2007-2021 W/ Bilstein Shocks
ReadyLIFT 1.5" Rear Add-A-Leaf Kit - Ford F-150
ReadyLIFT 7/8" Wheel Spacers W/ Studs - GM 1500
See all ReadyLIFT products, lead times and FAQs →
Disclaimer: The information on this page describes ReadyLIFT's own warranty policy. It is not a warranty offered by NVMOS (No Visible Means of Support LLC). Manufacturers update their terms at any time; we review these pages periodically, but the manufacturer's current official policy is the one that applies to your claim. Source: ReadyLIFT official warranty information. Last updated on nvmos.com: October 4, 2026. See our return policy for NVMOS's own terms.
About the brand
ReadyLIFT is an Ogden, Utah suspension brand built around more tire clearance with close-to-factory ride. NVMOS carries ReadyLIFT leveling kits, SST mid-lifts, Big Lift kits, rear blocks, control arms and wheel spacers for Ford, GM, Ram, Toyota and Jeep trucks.
Based in: Ogden, Utah · Founded: 2006 · Lead time: In-stock ships in 24–48 hrs
Shop all 556 ReadyLIFTWarrantyAll brands
Warranty terms are set by ReadyLIFT, not NVMOS, and can change. Bought from us? Call (920) 249-7744 and we'll handle the claim with the brand.
ReadyLIFT 7/8" Wheel Spacers With Studs for GM 1500 6-Lug
These ReadyLIFT 10-3485 wheel spacers are 7/8" thick with pressed-in 14mm factory-style studs, for 2007 and newer Chevy Silverado and GMC Sierra 1500 6-lug trucks. They are required when you run the factory wheels with a ReadyLIFT 4" SST lift kit. Browse more wheels and tires.
The spacers are CNC machined from 6061-T6 billet aluminum, and they are both hub centric and wheel centric. They set the outer wheel lip in line with the fender so the wheels do not stick out. They only work with factory GM wheels that have pockets on the back next to the lug holes, not factory steel wheels. See other full-size truck parts too.
| Spec | Detail |
|---|---|
| Thickness | 7/8" |
| Studs | Pressed-in 14mm factory-style |
| Material | CNC machined 6061-T6 billet aluminum |
| Fitment | Hub centric and wheel centric |
| SKU | 10-3485 |
- 2 billet aluminum spacers (one pair per quantity)
2007 and newer Chevy Silverado and GMC Sierra 1500 6-lug trucks, with factory GM wheels that have pockets next to the lug holes. Will not work with factory steel wheels. Can be used on 1999-2007 GM 1500 trucks if the wheels have the same pockets.
Complete your build
The pieces owners run with this one — matched to your build and to each other. Do the whole truck in one order instead of three.
$249.95
$529.00
$62.00
$29.99
$559.95
ReadyLIFT 7/8" Wheel Spacers W/ Studs FAQs
Which lift kits is this for?
ReadyLIFT 69-3485, 69-3285, 69-3295 and 69-3495 4" SST lift kits when running factory wheels.
Will it work with steel wheels?
No. It will not work with factory steel wheels.
How do I check the wheel fits?
Make sure the factory lugs fit into the wheel pockets without touching, and that the adapter sits flush with the wheel.
Is it sold as a pair?
Yes. Quantity 1 is one pair, which is two spacers.
Multi-column
Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!
Financing Available
Pay over time with Affirm or PayPal Credit at checkout, for qualified buyers.
Contact Us
Have a question? Just send us an e-mail at support@nvmos.com
