Front Bumper 20in Light Bar Mount for Jeep Wrangler JL & Gladiator JT
Warranty Information
Vendor warranty summary
Artec Industries Warranty
At a glance: Limited lifetime warranty against defects in material or workmanship
This is Artec Industries's warranty, not an NVMOS policy. We've summarized it in plain English to save you a search. The manufacturer's official terms always govern and can change without notice. Last reviewed on nvmos.com: October 4, 2026.
Coverage by product
| Product or component | Coverage |
|---|---|
| Artec Industries products | Limited lifetime, starting on delivery date |
| Returns of powder-coated products | Not returnable (manufacturer refund policy) |
What's covered
- Defects in material or workmanship for products bought, installed and used for their intended purpose
- Artec repairs or replaces a defective product at no charge (method at Artec's discretion)
What's not covered
- Misuse, abuse or neglect
- Improper installation
- Incorrect maintenance
How to make a Artec Industries warranty claim
- Call Artec at 855-278-3299 (Mon-Fri 9am-5pm MDT) to describe the issue
- Get an RMA number before shipping anything; packages without one are refused
Artec Industries contact: Phone: 855-278-3299 · Claim page / support
Bought it from NVMOS? Start with us.
Have your order number and a few photos of the issue ready, then call real humans at (920) 249-7744 or send us a message. We'll tell you whether the claim goes through us or straight to Artec Industries, and help it along either way.
Shop Artec Industries at NVMOS
Under Tailgate Plate - Aluminum, for Jeep Wrangler TJ/LJ 1997-2006
Coil Correction Plate for Jeep TJ Front Coil Springs (Pair)
Front and Rear Truss Package for Jeep Gladiator JT 2020+ (Free Front Axle Skid)
See all Artec Industries products, lead times and FAQs →
Disclaimer: The information on this page describes Artec Industries's own warranty policy. It is not a warranty offered by NVMOS (No Visible Means of Support LLC). Manufacturers update their terms at any time; we review these pages periodically, but the manufacturer's current official policy is the one that applies to your claim. Source: Artec Industries official warranty information. Last updated on nvmos.com: October 4, 2026. See our return policy for NVMOS's own terms.
About the brand
Artec Industries builds axle trusses, swap kits, suspension brackets and armor in North Salt Lake, Utah. NVMOS carries Artec reinforcements, control arms, skids, bumpers, fenders and battery mounts for Jeep, Toyota and Super Duty axles. It's for rigs running big tires and lockers that need housings and brackets that stay straight.
Based in: North Salt Lake, Utah · Made in: USA — most parts built in-house in Utah · Founded: 2003 · Lead time: Artec in-stock orders: 2–4 business days; NVMOS stock: 24–48 hours
Shop all 472 Artec IndustriesWarrantyAll brands
Warranty terms are set by Artec Industries, not NVMOS, and can change. Bought from us? Call (920) 249-7744 and we'll handle the claim with the brand.
The 20in Light Mount (JL5616) tucks a compact 20-inch side-stud LED bar into the factory front bumper of a Jeep Wrangler JL (2018+) or Gladiator JT (2020+). Where bigger bars can dominate the front end, this bracket keeps the lighting low-key — Artec built it from OEM laser scans so the bar sits tight and level against the stock bumper. Cut and dimple-died from 10-gauge steel, it is a clean upgrade for daily-driven rigs that still see dirt.
Features
- Carries one 20″ side-stud LED bar, dimensioned for Rigid and Baja Designs
- CNC laser-cut 10-gauge steel with dimple-died stiffening
- Built off laser scans and OEM CAD files — no drilling into the bumper
- OEM-texture black powder coat disappears against the factory plastic
- Ships with OEM-style black-coated mounting hardware
- Roughly 15 minutes to install with hand tools
- Made in the USA from American materials
This mount only fits the factory plastic or steel JL/JT bumper, and your light bar must use side studs — double-check both before ordering. Want more spread? Step up to the Front Bumper 30in Light Mount, or run pods on the Light Bridge Mount. See the full front bumper lineup for complete bumper options.
Complete your Jeep Gladiator build
More parts that fit your Jeep Gladiator and pair well with this one — matched and ready to install.
$109.99
$131.99
$175.99
$142.99
$12.99
More for your Jeep Gladiator
Picked from the 764 parts we carry for the Jeep Gladiator. Check the years and trim in each title — or call us and we’ll confirm fit.
Specifications
Front Bumper 20in Light Bar Mount for Jeep Wrangler JL & Gladiator JT FAQs
Which Jeeps and bumpers does this fit?
The Wrangler JL (2018+) and Gladiator JT (2020+) running the factory front bumper, either the plastic or the steel OEM version. It will not fit aftermarket bumpers — the bracket is shaped around the factory mounting points.
Do all 20″ light bars work?
Most do, as long as they mount with side studs. Artec sized the bracket for Rigid and Baja Designs 20″ bars, and other side-stud bars in that size generally bolt up. End-mount or slider-mount bars are not compatible.
What tools do I need to install it?
Just basic hand tools and about 15 minutes. The mount bolts to existing bumper locations with the included OEM-style black-coated hardware — no drilling, cutting, or welding. You will wire the light bar per its manufacturer’s instructions.
Multi-column
Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!
Financing Available
Buy now, pay later with PayPal Credit — available at checkout.
Contact Us
Have a question? Just send us an e-mail at support@nvmos.com
