High Clearance Comp Rear Bumper Center Skid for Jeep Gladiator JT 2020+
Warranty Information
Vendor warranty summary
Artec Industries Warranty
At a glance: Limited lifetime warranty against defects in material or workmanship
This is Artec Industries's warranty, not an NVMOS policy. We've summarized it in plain English to save you a search. The manufacturer's official terms always govern and can change without notice. Last reviewed on nvmos.com: October 4, 2026.
Coverage by product
| Product or component | Coverage |
|---|---|
| Artec Industries products | Limited lifetime, starting on delivery date |
| Returns of powder-coated products | Not returnable (manufacturer refund policy) |
What's covered
- Defects in material or workmanship for products bought, installed and used for their intended purpose
- Artec repairs or replaces a defective product at no charge (method at Artec's discretion)
What's not covered
- Misuse, abuse or neglect
- Improper installation
- Incorrect maintenance
How to make a Artec Industries warranty claim
- Call Artec at 855-278-3299 (Mon-Fri 9am-5pm MDT) to describe the issue
- Get an RMA number before shipping anything; packages without one are refused
Artec Industries contact: Phone: 855-278-3299 · Claim page / support
Bought it from NVMOS? Start with us.
Have your order number and a few photos of the issue ready, then call real humans at (920) 249-7744 or send us a message. We'll tell you whether the claim goes through us or straight to Artec Industries, and help it along either way.
Shop Artec Industries at NVMOS
Under Tailgate Plate - Aluminum, for Jeep Wrangler TJ/LJ 1997-2006
Coil Correction Plate for Jeep TJ Front Coil Springs (Pair)
Front and Rear Truss Package for Jeep Gladiator JT 2020+ (Free Front Axle Skid)
See all Artec Industries products, lead times and FAQs →
Disclaimer: The information on this page describes Artec Industries's own warranty policy. It is not a warranty offered by NVMOS (No Visible Means of Support LLC). Manufacturers update their terms at any time; we review these pages periodically, but the manufacturer's current official policy is the one that applies to your claim. Source: Artec Industries official warranty information. Last updated on nvmos.com: October 4, 2026. See our return policy for NVMOS's own terms.
About the brand
Artec Industries builds axle trusses, swap kits, suspension brackets and armor in North Salt Lake, Utah. NVMOS carries Artec reinforcements, control arms, skids, bumpers, fenders and battery mounts for Jeep, Toyota and Super Duty axles. It's for rigs running big tires and lockers that need housings and brackets that stay straight.
Based in: North Salt Lake, Utah · Made in: USA — most parts built in-house in Utah · Founded: 2003 · Lead time: Artec in-stock orders: 2–4 business days; NVMOS stock: 24–48 hours
Shop all 472 Artec IndustriesWarrantyAll brands
Warranty terms are set by Artec Industries, not NVMOS, and can change. Bought from us? Call (920) 249-7744 and we'll handle the claim with the brand.
The Comp Rear Bumper Center Skid is a replaceable aluminum bash plate that bolts to the center section of Artec Industries' Bantam Series high-clearance rear bumper on the Jeep Gladiator JT. High-clearance bumpers still drag on ledges and rock shelves — that is what they are for — and this skid makes sure the grinding happens on swappable high-strength aluminum instead of your powder-coated steel. Made in the USA and fully bolt-on, it keeps the main bumper looking and working like new no matter how many times you slide the tail over an obstacle.
Features
- High-strength aluminum sacrificial layer — impacts land on the skid, not the bumper
- Bolts directly to the Bantam center section; no drilling or fabrication
- Fully replaceable: unbolt the worn skid and install a fresh one
- Lightweight aluminum adds protection without meaningful weight gain
- Laser-cut and formed in the USA for a repeatable, precise fit
Fits the center section of the Bantam high-clearance rear bumper on the Jeep Gladiator JT (2020+). This is an accessory skid, not a standalone part — you need the High Clearance Rear Bumper Center Section installed for it to bolt to. Cover the outer corners the same way with the corner pod skids, and browse the full rear bumpers lineup for the rest of the system.
Complete your Jeep Gladiator build
More parts that fit your Jeep Gladiator and pair well with this one — matched and ready to install.
$149.99
$131.99
$175.99
$142.99
$12.99
More for your Jeep Gladiator
Picked from the 764 parts we carry for the Jeep Gladiator, matched to 2020+ model years. Check the years and trim in each title — or call us and we’ll confirm fit.
Specifications
High Clearance Comp Rear Bumper Center Skid for Jeep Gladiator JT 2020+ FAQs
Does this skid fit my Gladiator on its own?
No. It is a bolt-on accessory for the center section of Artec's Bantam Series high-clearance rear bumper on the Jeep Gladiator JT (2020-present). You need that center section — or the complete comp rear bumper — installed first; the skid then bolts to its existing mounting points.
Why is the skid aluminum instead of steel?
Because it is meant to be sacrificial. High-strength aluminum sheds impacts and slides over rock while keeping weight down, and since the skid is inexpensive and bolt-on, you replace it when it is chewed up rather than repairing or refinishing the steel bumper behind it.
Is any drilling or welding needed to install it?
No. The skid bolts to existing mounting points on the center section using the supplied hardware, and it comes off just as easily when it is time for a fresh one. The whole job takes basic hand tools.
Multi-column
Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!
Financing Available
Buy now, pay later with PayPal Credit — available at checkout.
Contact Us
Have a question? Just send us an e-mail at support@nvmos.com
