High Clearance Front Bumper Fairlead & Light Bracket for Jeep Wrangler JK, JL, JT
Warranty Information
Vendor warranty summary
Artec Industries Warranty
At a glance: Limited lifetime warranty against defects in material or workmanship
This is Artec Industries's warranty, not an NVMOS policy. We've summarized it in plain English to save you a search. The manufacturer's official terms always govern and can change without notice. Last reviewed on nvmos.com: October 4, 2026.
Coverage by product
| Product or component | Coverage |
|---|---|
| Artec Industries products | Limited lifetime, starting on delivery date |
| Returns of powder-coated products | Not returnable (manufacturer refund policy) |
What's covered
- Defects in material or workmanship for products bought, installed and used for their intended purpose
- Artec repairs or replaces a defective product at no charge (method at Artec's discretion)
What's not covered
- Misuse, abuse or neglect
- Improper installation
- Incorrect maintenance
How to make a Artec Industries warranty claim
- Call Artec at 855-278-3299 (Mon-Fri 9am-5pm MDT) to describe the issue
- Get an RMA number before shipping anything; packages without one are refused
Artec Industries contact: Phone: 855-278-3299 · Claim page / support
Bought it from NVMOS? Start with us.
Have your order number and a few photos of the issue ready, then call real humans at (920) 249-7744 or send us a message. We'll tell you whether the claim goes through us or straight to Artec Industries, and help it along either way.
Shop Artec Industries at NVMOS
Under Tailgate Plate - Aluminum, for Jeep Wrangler TJ/LJ 1997-2006
Coil Correction Plate for Jeep TJ Front Coil Springs (Pair)
Front and Rear Truss Package for Jeep Gladiator JT 2020+ (Free Front Axle Skid)
See all Artec Industries products, lead times and FAQs →
Disclaimer: The information on this page describes Artec Industries's own warranty policy. It is not a warranty offered by NVMOS (No Visible Means of Support LLC). Manufacturers update their terms at any time; we review these pages periodically, but the manufacturer's current official policy is the one that applies to your claim. Source: Artec Industries official warranty information. Last updated on nvmos.com: October 4, 2026. See our return policy for NVMOS's own terms.
About the brand
Artec Industries builds axle trusses, swap kits, suspension brackets and armor in North Salt Lake, Utah. NVMOS carries Artec reinforcements, control arms, skids, bumpers, fenders and battery mounts for Jeep, Toyota and Super Duty axles. It's for rigs running big tires and lockers that need housings and brackets that stay straight.
Based in: North Salt Lake, Utah · Made in: USA — most parts built in-house in Utah · Founded: 2003 · Lead time: Artec in-stock orders: 2–4 business days; NVMOS stock: 24–48 hours
Shop all 472 Artec IndustriesWarrantyAll brands
Warranty terms are set by Artec Industries, not NVMOS, and can change. Bought from us? Call (920) 249-7744 and we'll handle the claim with the brand.
Artec Industries' Fairlead & Light Bracket finishes the open center of the High Clearance Comp Front Bumper on the Jeep Wrangler JK (2007-2018), Wrangler JL (2018+), and Gladiator JT (2020+). CNC laser-cut and formed from 3/16" steel in the USA, it frames the winch fairlead opening and adds purpose-built tabs for auxiliary lighting, so the winch area looks intentional instead of unfinished and your cube lights or small light bar get a rigid, correctly positioned mount. It bolts to the bumper's existing provisions with no fabrication.
Features
- CNC laser-cut and formed from 3/16" steel for a precise, rigid fit
- Frames the winch fairlead opening on the High Clearance Comp bumper
- Integrated tabs mount cube lights or a compact light bar above the fairlead
- Bolt-on install using the bumper's existing provisions - no welding or drilling
- Purpose-built for one bumper, so alignment is never a guess
- Made in the USA
This is an accessory bracket, not a bumper - it requires the High Clearance Front Bumper or the hoop version to mount to, and it will not fit other bumpers. Mount your hawse or roller fairlead to the winch plate as usual; this bracket surrounds it and carries the lights. While you are in there, check the condition of your bash skid, and see more front-end options in the front bumpers collection.
Complete your Jeep Gladiator build
More parts that fit your Jeep Gladiator and pair well with this one — matched and ready to install.
$112.99
$131.99
$175.99
$142.99
$12.99
More for your Jeep Gladiator
Picked from the 764 parts we carry for the Jeep Gladiator. Check the years and trim in each title — or call us and we’ll confirm fit.
Specifications
High Clearance Front Bumper Fairlead & Light Bracket for Jeep Wrangler JK, JL, JT FAQs
Which bumper does this bracket fit?
It is built specifically for Artec's High Clearance Comp Front Bumper for the Jeep Wrangler JK, JL, and Gladiator JT, and it will not fit other bumpers. If you do not have the bumper yet, start there — this bracket bolts to its existing provisions.
What lights can I mount on it?
The tabs are sized for auxiliary lighting such as LED cube lights or a compact light bar, positioned above the winch fairlead where they light the trail without blocking the winch line. Specific light models are not prescribed — check your light's mounting foot against the tabs.
Does it interfere with the winch or fairlead?
No. Your hawse or roller fairlead mounts to the winch plate exactly as before — this bracket frames the opening around it while carrying the lights. Installation is bolt-on with the supplied hardware; no welding or drilling is required.
Multi-column
Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!
Financing Available
Buy now, pay later with PayPal Credit — available at checkout.
Contact Us
Have a question? Just send us an e-mail at support@nvmos.com
