Group 34 Optima Battery Rear Mount
Warranty Information
Vendor warranty summary
Artec Industries Warranty
At a glance: Limited lifetime warranty against defects in material or workmanship
This is Artec Industries's warranty, not an NVMOS policy. We've summarized it in plain English to save you a search. The manufacturer's official terms always govern and can change without notice. Last reviewed on nvmos.com: October 4, 2026.
Coverage by product
| Product or component | Coverage |
|---|---|
| Artec Industries products | Limited lifetime, starting on delivery date |
| Returns of powder-coated products | Not returnable (manufacturer refund policy) |
What's covered
- Defects in material or workmanship for products bought, installed and used for their intended purpose
- Artec repairs or replaces a defective product at no charge (method at Artec's discretion)
What's not covered
- Misuse, abuse or neglect
- Improper installation
- Incorrect maintenance
How to make a Artec Industries warranty claim
- Call Artec at 855-278-3299 (Mon-Fri 9am-5pm MDT) to describe the issue
- Get an RMA number before shipping anything; packages without one are refused
Artec Industries contact: Phone: 855-278-3299 · Claim page / support
Bought it from NVMOS? Start with us.
Have your order number and a few photos of the issue ready, then call real humans at (920) 249-7744 or send us a message. We'll tell you whether the claim goes through us or straight to Artec Industries, and help it along either way.
Shop Artec Industries at NVMOS
Under Tailgate Plate - Aluminum, for Jeep Wrangler TJ/LJ 1997-2006
Coil Correction Plate for Jeep TJ Front Coil Springs (Pair)
Front and Rear Truss Package for Jeep Gladiator JT 2020+ (Free Front Axle Skid)
See all Artec Industries products, lead times and FAQs →
Disclaimer: The information on this page describes Artec Industries's own warranty policy. It is not a warranty offered by NVMOS (No Visible Means of Support LLC). Manufacturers update their terms at any time; we review these pages periodically, but the manufacturer's current official policy is the one that applies to your claim. Source: Artec Industries official warranty information. Last updated on nvmos.com: October 4, 2026. See our return policy for NVMOS's own terms.
About the brand
Artec Industries builds axle trusses, swap kits, suspension brackets and armor in North Salt Lake, Utah. NVMOS carries Artec reinforcements, control arms, skids, bumpers, fenders and battery mounts for Jeep, Toyota and Super Duty axles. It's for rigs running big tires and lockers that need housings and brackets that stay straight.
Based in: North Salt Lake, Utah · Made in: USA — most parts built in-house in Utah · Founded: 2003 · Lead time: Artec in-stock orders: 2–4 business days; NVMOS stock: 24–48 hours
Shop all 472 Artec IndustriesWarrantyAll brands
Warranty terms are set by Artec Industries, not NVMOS, and can change. Bought from us? Call (920) 249-7744 and we'll handle the claim with the brand.
No floor space left for a battery? The Group 34 Optima Rear Mount is Artec Industries' vertical-surface answer. Instead of bolting down to a flat tray, this bracket fastens to a firewall, inner fender, cargo-area wall, or fabricated panel and cradles a Group 34 Optima horizontally off that surface. It is CNC-cut from 10-gauge (.130") cold-roll steel as a rigid one-piece bracket with pressed-in PEM nuts, making it a purpose-built solution for relocations and dual-battery builds where wall space is all you have.
Features
- Mounts to any flat vertical surface while holding the Group 34 Optima flat and horizontal
- CNC-cut from 10-gauge (.130") cold-roll steel in a rigid one-piece design
- Snug cradle eliminates the battery movement that causes premature wear
- Self-clinching (PEM) nuts pressed in — fasteners thread into the bracket with nothing loose behind the panel
- Open window keeps the battery label and specs readable without pulling the battery
- Assembled footprint roughly 10" long x 7" wide x 8" tall
- Bolt-on install; welding only needed if you fabricate your own mounting panel
Measure your panel before ordering — you need a flat vertical surface that clears the bracket's roughly 10" x 8" face plus battery depth. The bracket ships in bare steel and must be coated before install. If your build has floor space after all, the flat Group 34 Optima top mount is the simpler route, and the 4-bolt battery mounting kit supplies standalone hardware. More fabrication-grade parts live in the Artec Industries collection.
Specifications
Group 34 Optima Battery Rear Mount FAQs
How is this different from the standard Group 34 Optima mount?
The standard mount bolts the battery down onto a flat horizontal surface. This rear-mount version fastens to a vertical panel — firewall, inner fender, cargo wall — and holds the battery horizontal off that wall. Choose it when your build has wall space but no floor space; the bracket measures roughly 10" x 7" x 8" assembled.
What vehicles does it fit?
It is universal. The bracket is built around the Group 34 Optima battery footprint rather than any chassis, so it works on Jeep, Toyota, and full-size truck builds alike — anywhere there is a suitable flat vertical surface to bolt to. Some trimming or adaptation may be needed for a clean install in your specific location.
Does it require welding or a finish coat?
No welding is required for the mount itself — it bolts to your chosen panel using the pressed-in PEM nuts, and welding only comes into play if you fabricate a custom mounting surface. It does need finishing: the bracket ships in bare cold-roll steel and must be painted or powder coated before use to prevent rust.
Multi-column
Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!
Financing Available
Buy now, pay later with PayPal Credit — available at checkout.
Contact Us
Have a question? Just send us an e-mail at support@nvmos.com
