CBI Offroad Fab Bed Bars - Ram 1500
Warranty Information
Vendor warranty summary
CBI Offroad Fab Warranty
At a glance: Limited lifetime on CBI-made parts for the original owner; powder coat not covered
This is CBI Offroad Fab's warranty, not an NVMOS policy. We've summarized it in plain English to save you a search. The manufacturer's official terms always govern and can change without notice. Last reviewed on nvmos.com: October 4, 2026.
Coverage by product
| Product or component | Coverage |
|---|---|
| CBI-manufactured parts (bumpers, sliders, armor, etc.) | Limited lifetime (original owner) |
| U-bolts | 1 year |
| Pull pins | 1 year |
| Hardware kits | 1 year (wear item) |
| CBI latch, latch catch, hub rebuild kit | Not covered (wear parts) |
| Powder coat finish | Not covered |
- Original purchaser only — coverage does not transfer if you sell it.
- Keep your NVMOS order confirmation — proof of purchase is required.
What's covered
- Defects in CBI-manufactured parts for as long as the original buyer owns them
- Missing parts or hardware if reported within 90 days
- CBI's remedy is limited to repair, replacement or refund
What's not covered
- Powder coat finish of any kind
- Normal wear, cosmetic rust and scratches
- Accidents, unlawful vehicle use, racing or competition
- Any customer modification or repair
- Misuse, neglect, overloading or improper assembly/installation
- Lost profits, consequential damages or damage to the vehicle
- Items lost in transit on return
How to make a CBI Offroad Fab warranty claim
- Test-fit the product and check all hardware before installing
- Submit a claim through the online warranty form (phone claims not accepted)
- Include a copy of your original invoice
- Wait for an RMA number (reply in about 2-3 business days)
- Ship the item to CBI, at your cost, with tracking and insurance, RMA printed on the label and box
CBI Offroad Fab contact: Phone: (866) 522-0697 · Claim page / support
Bought it from NVMOS? Start with us.
Have your order number and a few photos of the issue ready, then call real humans at (920) 249-7744 or send us a message. We'll tell you whether the claim goes through us or straight to CBI Offroad Fab, and help it along either way.
Shop CBI Offroad Fab at NVMOS
Toyota Tacoma Classic Front Bumper | 2024-2026
Chevy Colorado ZR2/Z71 Full Overland Skid Plates | 2015-2022
Chevy Colorado ZR2/Z71 Rear Skid Plates | 2015-2022
See all CBI Offroad Fab products, lead times and FAQs →
Disclaimer: The information on this page describes CBI Offroad Fab's own warranty policy. It is not a warranty offered by NVMOS (No Visible Means of Support LLC). Manufacturers update their terms at any time; we review these pages periodically, but the manufacturer's current official policy is the one that applies to your claim. Source: CBI Offroad Fab official warranty information. Last updated on nvmos.com: October 4, 2026. See our return policy for NVMOS's own terms.
About the brand
CBI Offroad Fab builds steel and aluminum armor in Idaho Falls, Idaho. NVMOS carries CBI bumpers, rock sliders, skid plates and light brackets for Toyota Tacoma, 4Runner, Tundra, Land Cruiser 250, Lexus GX470, Chevy Colorado, Nissan Frontier and Sprinter owners who want their underside to stay intact.
Based in: Idaho Falls, Idaho · Made in: USA (Idaho Falls) · Building since: 1999 · Lead time: Built to order: about 2–12 weeks
Shop all 300 CBI Offroad FabWarrantyLead timesAll brands
Warranty terms are set by CBI Offroad Fab, not NVMOS, and can change. Bought from us? Call (920) 249-7744 and we'll handle the claim with the brand.
These CBI Offroad Fab bed bars turn the bed of a Ram 1500 into a mounting platform for a rooftop tent, bikes, shovels or whatever else you haul. The towers sit at a steeper angle than on earlier CBI bars, which the vendor says improves load capacity and weight distribution, a useful trait when the load is heavy or you are on rough ground.
Width is adjustable, so one design adapts to different bed sizes, and slots in the bars give you additional mounting points for gear. Construction is steel with a durable powder-coated finish meant to hold up in off-road conditions.
The updated tower design is aimed at heavy equipment and cargo as much as at a tent, so the bars make sense as a base for a bed-mounted setup that sees real trail use. Check the bed width against your truck before ordering, and ask us if you want a second opinion.
Fitment
Ram 1500 bed. The vendor does not state a year range for this listing, so check your bed before ordering.
Questions before you order?
Fitment questions are easier to settle before the box ships. Call or text Carl & Anton at (920) 249-7744 or use the chat — real humans in Sheboygan, Wisconsin, not a call center.
Specifications
CBI Offroad Fab Bed Bars FAQs
Will it fit my bed?
The bars are designed to fit most truck beds and have adjustable width. This listing is for the Ram 1500.
What can I mount on them?
The vendor lists tents, bikes and shovels as examples, and the slots allow additional equipment to be mounted.
What are they made of?
Steel with a powder-coated finish.
Multi-column
Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!
Financing Available
Buy now, pay later with PayPal Credit — available at checkout.
Contact Us
Have a question? Just send us an e-mail at support@nvmos.com
