AXIS Aluminum Steering Kit for Jeep Wrangler JL & Gladiator JT
Warranty Information
Vendor warranty summary
Artec Industries Warranty
At a glance: Limited lifetime warranty against defects in material or workmanship
This is Artec Industries's warranty, not an NVMOS policy. We've summarized it in plain English to save you a search. The manufacturer's official terms always govern and can change without notice. Last reviewed on nvmos.com: October 4, 2026.
Coverage by product
| Product or component | Coverage |
|---|---|
| Artec Industries products | Limited lifetime, starting on delivery date |
| Returns of powder-coated products | Not returnable (manufacturer refund policy) |
What's covered
- Defects in material or workmanship for products bought, installed and used for their intended purpose
- Artec repairs or replaces a defective product at no charge (method at Artec's discretion)
What's not covered
- Misuse, abuse or neglect
- Improper installation
- Incorrect maintenance
How to make a Artec Industries warranty claim
- Call Artec at 855-278-3299 (Mon-Fri 9am-5pm MDT) to describe the issue
- Get an RMA number before shipping anything; packages without one are refused
Artec Industries contact: Phone: 855-278-3299 · Claim page / support
Bought it from NVMOS? Start with us.
Have your order number and a few photos of the issue ready, then call real humans at (920) 249-7744 or send us a message. We'll tell you whether the claim goes through us or straight to Artec Industries, and help it along either way.
Shop Artec Industries at NVMOS
Under Tailgate Plate - Aluminum, for Jeep Wrangler TJ/LJ 1997-2006
Coil Correction Plate for Jeep TJ Front Coil Springs (Pair)
Front and Rear Truss Package for Jeep Gladiator JT 2020+ (Free Front Axle Skid)
See all Artec Industries products, lead times and FAQs →
Disclaimer: The information on this page describes Artec Industries's own warranty policy. It is not a warranty offered by NVMOS (No Visible Means of Support LLC). Manufacturers update their terms at any time; we review these pages periodically, but the manufacturer's current official policy is the one that applies to your claim. Source: Artec Industries official warranty information. Last updated on nvmos.com: October 4, 2026. See our return policy for NVMOS's own terms.
About the brand
Artec Industries builds axle trusses, swap kits, suspension brackets and armor in North Salt Lake, Utah. NVMOS carries Artec reinforcements, control arms, skids, bumpers, fenders and battery mounts for Jeep, Toyota and Super Duty axles. It's for rigs running big tires and lockers that need housings and brackets that stay straight.
Based in: North Salt Lake, Utah · Made in: USA — most parts built in-house in Utah · Founded: 2003 · Lead time: Artec in-stock orders: 2–4 business days; NVMOS stock: 24–48 hours
Shop all 472 Artec IndustriesWarrantyAll brands
Warranty terms are set by Artec Industries, not NVMOS, and can change. Bought from us? Call (920) 249-7744 and we'll handle the claim with the brand.
The AXIS Aluminum Steering Kit replaces the bend-prone factory tie rod and drag link on the Jeep Wrangler JL and Gladiator JT with 7075 aluminum links that shed serious weight without giving up strength. Artec engineered it from 3D scans and ran the design in their ARTECON rig through five years of rock crawling and daily driving before release. If bigger tires have your JL or JT steering feeling vague and flexy, this is the bolt-in cure — no welding, no drilling.
Features
- Tie rod and drag link machined from high-strength 7075 aluminum
- Right- and left-hand 1.25" threaded tie rod and drag link ends
- Opposing threads let you set toe and drag link length without disconnecting the ends
- Machined wrench flats for easy tightening and adjustment
- Includes four 1.25"-12 tpi jam nuts (two RH, two LH)
- Proven through five years of ARTECON testing; made in the USA
- Two versions match factory knuckle tapers by trim
Select the variant for your trim: one fits Sport, Sahara, Overland, and non-US/Canada JL International Rubicon; the other fits Rubicon, Sport MaxTow, and all International JTs — the difference is the knuckle taper. Building the whole front end? Pair it with the JL/JT Apex Front Axle Truss, or step to the Superduty Swap Aluminum Steering Kit if you are running a 1-ton axle. See more in our tie rods collection and the full Jeep Wrangler lineup.
Complete your Jeep Gladiator build
More parts that fit your Jeep Gladiator and pair well with this one — matched and ready to install.
$1,319.99
$131.99
$175.99
$142.99
$12.99
More for your Jeep Gladiator
Picked from the 764 parts we carry for the Jeep Gladiator. Check the years and trim in each title — or call us and we’ll confirm fit.
Specifications
AXIS Aluminum Steering Kit for Jeep Wrangler JL & Gladiator JT FAQs
Which variant fits my Jeep?
Pick by trim, because the two versions use different knuckle tapers. One fits JL Sport, Sahara, Overland, and non-US/Canada International Rubicon models; the other fits Rubicon, Sport MaxTow, and all International JT Gladiators. Confirm your trim before ordering.
Does installation require any fabrication?
No. The AXIS kit is a direct bolt-in replacement for the factory tie rod and drag link. Opposing right- and left-hand threads with machined wrench flats let you set toe and drag link length on the vehicle, then lock everything down with the supplied 1.25"-12 tpi jam nuts.
Can aluminum steering handle rock crawling?
Artec ran this exact design on their ARTECON rig for five years of hard rock crawling and daily driving before selling it. The 7075 aluminum links are stronger than the factory parts they replace and far lighter than steel tube setups, and the 1.25" ends carry big-tire steering loads.
Multi-column
Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!
Financing Available
Buy now, pay later with PayPal Credit — available at checkout.
Contact Us
Have a question? Just send us an e-mail at support@nvmos.com
