Tube Adapter 7/8"-14 TPI for 1.0" ID / 1.5" OD Tube

The 7/8"-14 tube adapter is the middle child of Artec's weld-in inserts and probably the most used: it drops into 1.5" OD, 0.250" wall DOM tubing (1.0" ID) and accepts 7/8"-14 rod ends, the workhorse size for upper links, tie rods, and drag links. Machined from steel with full-length threads, a no-grind beveled weld edge, a flat land on the OD, and wrench flats, it turns raw tube into an adjustable link or steering bar that looks factory-finished.

Features

• 7/8"-14 TPI full-length threading for maximum positive engagement
• 1.0" ID body press-fits the bore of 1.5" OD x 0.250" wall DOM tube
• 1.5" OD matches the tube outside for a flush, stepless joint
• Beveled edge welds with no pre-grinding; flat OD land keeps the weld edge square
• Machined wrench flats for easy length adjustment
• Right-hand (TA1401R) and left-hand reverse (TA1401L) thread options
• CNC-machined steel, made in the USA

This is a universal fabrication component — confirm your tube ID and your rod end thread pitch before ordering. Pair a right-hand and a left-hand adapter on the same tube so the finished link or tie rod adjusts without unbolting, and lock each joint with the 7/8"-14 TPI Jam Nut. Lighter rods use the 3/4"-16 TPI adapter; heavy lower links step up to the 1.25"-12 TPI adapter. Welding required.