Boatside Body Mounts (1.25 Inch Lift) for Jeep Wrangler TJ 1997-2006
Warranty Information
Vendor warranty summary
Artec Industries Warranty
At a glance: Limited lifetime warranty against defects in material or workmanship
This is Artec Industries's warranty, not an NVMOS policy. We've summarized it in plain English to save you a search. The manufacturer's official terms always govern and can change without notice. Last reviewed on nvmos.com: October 4, 2026.
Coverage by product
| Product or component | Coverage |
|---|---|
| Artec Industries products | Limited lifetime, starting on delivery date |
| Returns of powder-coated products | Not returnable (manufacturer refund policy) |
What's covered
- Defects in material or workmanship for products bought, installed and used for their intended purpose
- Artec repairs or replaces a defective product at no charge (method at Artec's discretion)
What's not covered
- Misuse, abuse or neglect
- Improper installation
- Incorrect maintenance
How to make a Artec Industries warranty claim
- Call Artec at 855-278-3299 (Mon-Fri 9am-5pm MDT) to describe the issue
- Get an RMA number before shipping anything; packages without one are refused
Artec Industries contact: Phone: 855-278-3299 · Claim page / support
Bought it from NVMOS? Start with us.
Have your order number and a few photos of the issue ready, then call real humans at (920) 249-7744 or send us a message. We'll tell you whether the claim goes through us or straight to Artec Industries, and help it along either way.
Shop Artec Industries at NVMOS
Under Tailgate Plate - Aluminum, for Jeep Wrangler TJ/LJ 1997-2006
Coil Correction Plate for Jeep TJ Front Coil Springs (Pair)
Front and Rear Truss Package for Jeep Gladiator JT 2020+ (Free Front Axle Skid)
See all Artec Industries products, lead times and FAQs →
Disclaimer: The information on this page describes Artec Industries's own warranty policy. It is not a warranty offered by NVMOS (No Visible Means of Support LLC). Manufacturers update their terms at any time; we review these pages periodically, but the manufacturer's current official policy is the one that applies to your claim. Source: Artec Industries official warranty information. Last updated on nvmos.com: October 4, 2026. See our return policy for NVMOS's own terms.
About the brand
Artec Industries builds axle trusses, swap kits, suspension brackets and armor in North Salt Lake, Utah. NVMOS carries Artec reinforcements, control arms, skids, bumpers, fenders and battery mounts for Jeep, Toyota and Super Duty axles. It's for rigs running big tires and lockers that need housings and brackets that stay straight.
Based in: North Salt Lake, Utah · Made in: USA — most parts built in-house in Utah · Founded: 2003 · Lead time: Artec in-stock orders: 2–4 business days; NVMOS stock: 24–48 hours
Shop all 472 Artec IndustriesWarrantyAll brands
Warranty terms are set by Artec Industries, not NVMOS, and can change. Bought from us? Call (920) 249-7744 and we'll handle the claim with the brand.
These Artec Boatside Body Mounts swap the crush-prone factory mounts on a Jeep Wrangler TJ or LJ for 3/16" steel replacements that raise the tub 1.25" at the same time. The factory mounts are the low point along the boatside — they catch ledges, fold under impact, and rust off the frame — while these are fully boxed and angled underneath so each mount works as its own skid. The built-in lift opens room for bigger tires, exhaust routing, or engine and drivetrain work without stacking a separate body lift kit, and no taller bushings are needed.
Features
- CNC laser cut and CNC bent from 3/16" steel
- Builds in 1.25" of body lift — no separate body lift kit or taller bushings needed
- Completely boxed underside angled to work as a skid plate
- Angled sides improve break-over clearance over stock mounts
- CAD-designed from Chrysler factory models for a frame-correct fit
- Locating tabs align the laser-cut pieces during weld-up
- Made in the USA
Fits the Jeep Wrangler TJ (1997-2006) and LJ Unlimited (2004-2006), and installation requires a competent welder — the mounts weld together and then weld to the frame, with bare steel to paint afterward. To keep the radiator and four rear body mounts level with the new 1.25" height, add the TJ Aluminum Body Mount Spacer Kit; if you want to stay at stock height, the OEM-height version is the same mount without lift. More options live in body mounts.
Complete your Jeep Wrangler build
More parts that fit your Jeep Wrangler and pair well with this one — matched and ready to install.
$329.99
$100.00
$406.99
$69.99
$899.99
More for your Jeep Wrangler
Picked from the 1751 parts we carry for the Jeep Wrangler, matched to 1997–2006 model years. Check the years and trim in each title — or call us and we’ll confirm fit.
Shop all 1751 parts for your Jeep Wrangler →
Specifications
Boatside Body Mounts (1.25 Inch Lift) for Jeep Wrangler TJ 1997-2006 FAQs
How much lift do these mounts add, and do I need new bushings?
They build 1.25" of body lift directly into the mount, so there is no need for taller bushings or a separate body lift kit. That raise creates room for larger tires, exhaust, or engine and drivetrain modifications on a TJ (1997-2006) or LJ (2004-2006).
Do I need the spacer kit with these?
If your Jeep has no existing body lift, yes — the Aluminum Body Mount Spacer Kit raises the radiator mount and four rear body mounts 1.25" so the whole tub sits level with the new boatside height. If you already run a 1.25" body lift, those points are covered and the spacers are unnecessary.
How hard is the installation?
This is a fabrication job: the laser-cut pieces weld together — locating tabs and etched part numbers keep them aligned — and the finished mounts weld to the frame. Have a competent welder do the work, and paint or coat the bare steel afterward to protect it.
Multi-column
Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!
Financing Available
Buy now, pay later with PayPal Credit — available at checkout.
Contact Us
Have a question? Just send us an e-mail at support@nvmos.com
