S&B 50 Gallon Detail Tank
Warranty Information
Vendor warranty summary
S&B Filters Warranty
At a glance: Million Mile Limited Warranty; lifetime on S&B Suspension
This is S&B Filters's warranty, not an NVMOS policy. We've summarized it in plain English to save you a search. The manufacturer's official terms always govern and can change without notice. Last reviewed on nvmos.com: October 4, 2026.
Coverage by product
| Product or component | Coverage |
|---|---|
| Most S&B products (default, incl. lighting) | Million Mile Limited Warranty |
| S&B Suspension (e.g. radius arm drops) | Lifetime (original purchaser) |
| Intake elbows | 5 years |
| Body mounts | Lifetime (original purchaser) |
| Diesel fuel tanks | Lifetime |
| Particle separator electrical / flexible ducting | 3 years / 1 year |
| Competitor (CR-series) air filters | 1 year, manufacturing defects only |
- Original purchaser only — coverage does not transfer if you sell it.
- Keep your NVMOS order confirmation — proof of purchase is required.
What's covered
- Products that fail or prove defective under normal driving
- S&B replaces covered products
- Applies only to products bought from authorized S&B dealers
What's not covered
- Racing or competition use
- Custom modifications or unauthorized changes
- Industrial or marine use, or illegal on-highway applications
- Normal wear, chemical damage and improper installation
- Products from unauthorized dealers or with removed/altered serial numbers
- Consequential, indirect or special damages
How to make a S&B Filters warranty claim
- Call or email S&B customer service
- Send proof of purchase plus photos of the problem
- Get an RMA number before shipping anything back
- Pay return shipping; S&B decides coverage and arranges replacement
S&B Filters contact: Phone: (909) 947-0015 · Email: customerservice@sbfilters.com · Claim page / support
Bought it from NVMOS? Start with us.
Have your order number and a few photos of the issue ready, then call real humans at (920) 249-7744 or send us a message. We'll tell you whether the claim goes through us or straight to S&B Filters, and help it along either way.
Shop S&B Filters at NVMOS
Cold Air Intake For 2021-2026 Ford F-150 3.5L PowerBoost
Cold Air Intake for 2019-2026 Chevrolet Silverado 1500 / GMC Sierra 1500 2.7L
S&B Replacement Clear Lid (Hardware Not Included) - AM0388-00
See all S&B Filters products, lead times and FAQs →
Disclaimer: The information on this page describes S&B Filters's own warranty policy. It is not a warranty offered by NVMOS (No Visible Means of Support LLC). Manufacturers update their terms at any time; we review these pages periodically, but the manufacturer's current official policy is the one that applies to your claim. Source: S&B Filters official warranty information. Last updated on nvmos.com: October 4, 2026. See our return policy for NVMOS's own terms.
About the brand
S&B Filters is a family-owned manufacturer in Fontana, California, that started with cold air intakes. NVMOS carries S&B intakes and filters, intercooler pipes, Ford Super Duty suspension, body mounts and van water tanks for gas and diesel trucks, Toyota trucks and SUVs, and Sprinter, Transit and ProMaster vans.
Based in: Fontana, California · Lead time: In-stock items ship in 24–48 hours
Shop all 584 S&B FiltersWarrantyAll brands
Warranty terms are set by S&B Filters, not NVMOS, and can change. Bought from us? Call (920) 249-7744 and we'll handle the claim with the brand.
The S&B 50 Gallon Detail Tank is a compact rectangular water tank with its fittings already installed. It measures 41 inches long, 14 inches wide and 25 inches tall, a narrow profile that can slip into spaces where a wider tank would not fit.
Three 1/2 inch NPT spin-weld fittings sit on the bottom and a single 3/4 inch NPT spin-weld fitting is on the top left, giving you ready-made points for outlets, fill and venting.
Fitment
No specific vehicle is listed. It is a universal-fit tank, so compare the dimensions to your space. S&B says they are approximate and can vary by up to 0.5 inch.
What's included
The tank only. Mounting brackets and straps are not included.
Questions before you order?
Fitment questions are easier to settle before the box ships. Call or text Carl & Anton at (920) 249-7744 or use the chat — real humans in Sheboygan, Wisconsin, not a call center.
Specifications
S&B 50 Gallon Detail Tank FAQs
What are the tank dimensions?
S&B lists it at 41" long x 14" wide x 25" tall. Dimensions are approximate and can vary by up to 0.5 inch.
What fittings does the tank have?
It has three 1/2 inch NPT spin-weld fittings on the bottom and one 3/4 inch NPT spin-weld fitting at the top left.
Do brackets or straps come with it?
No. S&B states the tank does not include mounting brackets and/or straps, so you need to supply your own.
Is it made for a specific vehicle?
No vehicle fitment is listed. It is a universal-fit rectangular water and detail tank, so fit depends on your space and mounting setup.
Multi-column
Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!
Financing Available
Buy now, pay later with PayPal Credit — available at checkout.
Contact Us
Have a question? Just send us an e-mail at support@nvmos.com
