Rivnut Tool
Warranty Information
Vendor warranty summary
Artec Industries Warranty
At a glance: Limited lifetime warranty against defects in material or workmanship
This is Artec Industries's warranty, not an NVMOS policy. We've summarized it in plain English to save you a search. The manufacturer's official terms always govern and can change without notice. Last reviewed on nvmos.com: October 4, 2026.
Coverage by product
| Product or component | Coverage |
|---|---|
| Artec Industries products | Limited lifetime, starting on delivery date |
| Returns of powder-coated products | Not returnable (manufacturer refund policy) |
What's covered
- Defects in material or workmanship for products bought, installed and used for their intended purpose
- Artec repairs or replaces a defective product at no charge (method at Artec's discretion)
What's not covered
- Misuse, abuse or neglect
- Improper installation
- Incorrect maintenance
How to make a Artec Industries warranty claim
- Call Artec at 855-278-3299 (Mon-Fri 9am-5pm MDT) to describe the issue
- Get an RMA number before shipping anything; packages without one are refused
Artec Industries contact: Phone: 855-278-3299 · Claim page / support
Bought it from NVMOS? Start with us.
Have your order number and a few photos of the issue ready, then call real humans at (920) 249-7744 or send us a message. We'll tell you whether the claim goes through us or straight to Artec Industries, and help it along either way.
Shop Artec Industries at NVMOS
Under Tailgate Plate - Aluminum, for Jeep Wrangler TJ/LJ 1997-2006
Coil Correction Plate for Jeep TJ Front Coil Springs (Pair)
Front and Rear Truss Package for Jeep Gladiator JT 2020+ (Free Front Axle Skid)
See all Artec Industries products, lead times and FAQs →
Disclaimer: The information on this page describes Artec Industries's own warranty policy. It is not a warranty offered by NVMOS (No Visible Means of Support LLC). Manufacturers update their terms at any time; we review these pages periodically, but the manufacturer's current official policy is the one that applies to your claim. Source: Artec Industries official warranty information. Last updated on nvmos.com: October 4, 2026. See our return policy for NVMOS's own terms.
About the brand
Artec Industries builds axle trusses, swap kits, suspension brackets and armor in North Salt Lake, Utah. NVMOS carries Artec reinforcements, control arms, skids, bumpers, fenders and battery mounts for Jeep, Toyota and Super Duty axles. It's for rigs running big tires and lockers that need housings and brackets that stay straight.
Based in: North Salt Lake, Utah · Made in: USA — most parts built in-house in Utah · Founded: 2003 · Lead time: Artec in-stock orders: 2–4 business days; NVMOS stock: 24–48 hours
Shop all 472 Artec IndustriesWarrantyAll brands
Warranty terms are set by Artec Industries, not NVMOS, and can change. Bought from us? Call (920) 249-7744 and we'll handle the claim with the brand.
The Artec Rivnut Tool turns rivet nut installation into a two-minute job with an impact driver — no dedicated rivnut gun required. Rivet nuts (threaded inserts) are how you add strong bolt-in mounting points to sheet metal, frames, and brackets when you cannot reach the back side to hold a nut, and they show up constantly in armor, skid plate, and accessory installs. This laser-cut steel tool sets the two most common sizes: insert the rivnut, align the matching hole, thread in the included Grade 8 bolt, and compress it tight with the impact.
Features
- CNC laser cut from 1/8" steel for durability
- Angled ends with a 1/4" hole and a 3/8" hole for the two common rivnut sizes
- Runs off a standard impact driver — no specialty rivnut gun needed
- Includes two 3/8"-16 and two 1/4"-20 Grade 8 hex bolts to draw inserts tight
- Compact enough to live in a trail tool kit
- Reusable across unlimited installs
This is a universal fabrication tool with no vehicle fitment to check — just match your rivnut size (1/4" or 3/8") to the corresponding hole. It pairs naturally with bolt-on armor projects, and it earns a spot next to the Artec Tire Tool Tray in a trail repair kit. Find more shop gear in replacement axle parts and tools and the wider Artec Industries lineup.
Specifications
Rivnut Tool FAQs
What rivnut sizes does it install?
The tool has two angled ends, one with a 1/4" hole and one with a 3/8" hole, so it sets 1/4" and 3/8" rivet nuts — the two sizes you will meet on most armor, skid plate, and accessory installs. Match the insert to the corresponding hole and you are set.
Do I need a rivnut gun or any special tooling?
No. That is the point of this tool: insert the rivnut, align the hole, thread in the included Grade 8 bolt, press the tool flat against the surface, and run the bolt with a standard impact driver to compress the insert. No dedicated rivnut gun required.
What hardware comes with it?
It ships with two 3/8"-16 tpi and two 1/4"-20 tpi Grade 8 hex bolts — the strong hardware you need to draw inserts tight without stripping threads. The 1/8" laser-cut steel tool itself is reusable across unlimited installs.
Multi-column
Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!
Financing Available
Buy now, pay later with PayPal Credit — available at checkout.
Contact Us
Have a question? Just send us an e-mail at support@nvmos.com
