JT/JL to TJ Front Swap Kit for 05 Casting M210, Jeep Wrangler TJ/LJ 1997-2006
Warranty Information
Vendor warranty summary
Artec Industries Warranty
At a glance: Limited lifetime warranty against defects in material or workmanship
This is Artec Industries's warranty, not an NVMOS policy. We've summarized it in plain English to save you a search. The manufacturer's official terms always govern and can change without notice. Last reviewed on nvmos.com: October 4, 2026.
Coverage by product
| Product or component | Coverage |
|---|---|
| Artec Industries products | Limited lifetime, starting on delivery date |
| Returns of powder-coated products | Not returnable (manufacturer refund policy) |
What's covered
- Defects in material or workmanship for products bought, installed and used for their intended purpose
- Artec repairs or replaces a defective product at no charge (method at Artec's discretion)
What's not covered
- Misuse, abuse or neglect
- Improper installation
- Incorrect maintenance
How to make a Artec Industries warranty claim
- Call Artec at 855-278-3299 (Mon-Fri 9am-5pm MDT) to describe the issue
- Get an RMA number before shipping anything; packages without one are refused
Artec Industries contact: Phone: 855-278-3299 · Claim page / support
Bought it from NVMOS? Start with us.
Have your order number and a few photos of the issue ready, then call real humans at (920) 249-7744 or send us a message. We'll tell you whether the claim goes through us or straight to Artec Industries, and help it along either way.
Shop Artec Industries at NVMOS
Under Tailgate Plate - Aluminum, for Jeep Wrangler TJ/LJ 1997-2006
Coil Correction Plate for Jeep TJ Front Coil Springs (Pair)
Front and Rear Truss Package for Jeep Gladiator JT 2020+ (Free Front Axle Skid)
See all Artec Industries products, lead times and FAQs →
Disclaimer: The information on this page describes Artec Industries's own warranty policy. It is not a warranty offered by NVMOS (No Visible Means of Support LLC). Manufacturers update their terms at any time; we review these pages periodically, but the manufacturer's current official policy is the one that applies to your claim. Source: Artec Industries official warranty information. Last updated on nvmos.com: October 4, 2026. See our return policy for NVMOS's own terms.
About the brand
Artec Industries builds axle trusses, swap kits, suspension brackets and armor in North Salt Lake, Utah. NVMOS carries Artec reinforcements, control arms, skids, bumpers, fenders and battery mounts for Jeep, Toyota and Super Duty axles. It's for rigs running big tires and lockers that need housings and brackets that stay straight.
Based in: North Salt Lake, Utah · Made in: USA — most parts built in-house in Utah · Founded: 2003 · Lead time: Artec in-stock orders: 2–4 business days; NVMOS stock: 24–48 hours
Shop all 472 Artec IndustriesWarrantyAll brands
Warranty terms are set by Artec Industries, not NVMOS, and can change. Bought from us? Call (920) 249-7744 and we'll handle the claim with the brand.
The Artec Industries JT/JL to TJ Front Swap is the axle-side bracket set that puts a Rubicon-grade Dana M210 front axle under a Jeep Wrangler TJ or Unlimited LJ. The brackets weld directly to a donor housing from a Wrangler JL (2018+) or Gladiator JT (2020+) and reproduce the TJ's lower control-arm, coil, shock, and track-bar mounting points at their factory locations, so the modern axle drops into stock-style TJ suspension. This version is cut specifically for the 2005-style "05 casting" M210 housing. It is engineered from Dana Corp/Spicer and OEM axle data for correct clearance and geometry.
Features
- Weld-on axle-side brackets adapt a JL/JT Dana M210 front axle to TJ/LJ suspension geometry
- Reproduces the lower control-arm, coil, shock, and track-bar mounts at TJ locations
- Cut specifically for the 05-casting M210 housing
- Heavy-duty steel construction
- 3D-engineered from Dana Corp/Spicer and OEM axle data
- Made in the USA (SKU TJ1007)
Confirm your donor housing is the 05-style casting before ordering; original-casting housings take the JL/JT to TJ APEX Front Swap Kit for the original casting instead. On the frame side, pair these brackets with the TJ Front Frame Coil Buckets to complete the geometry, and note that all welding should be done by a competent fabricator. Browse more axle reinforcements from the full Artec Industries lineup.
Complete your Jeep Wrangler build
More parts that fit your Jeep Wrangler and pair well with this one — matched and ready to install.
$299.00
$100.00
$406.99
$69.99
$899.99
More for your Jeep Wrangler
Picked from the 1751 parts we carry for the Jeep Wrangler, matched to 1997–2006 model years. Check the years and trim in each title — or call us and we’ll confirm fit.
Shop all 1751 parts for your Jeep Wrangler →
Specifications
JT/JL to TJ Front Swap Kit for 05 Casting M210, Jeep Wrangler TJ/LJ 1997-2006 FAQs
Which M210 housings does this kit fit?
It fits the Jeep JL/JT Dana M210 front axle with the 2005-style "05 casting" center section. Check your donor housing before ordering — if it carries the original casting, use Artec's APEX front swap kit for the original casting so the brackets index correctly on the housing.
What do I need on the frame side of the swap?
These are the axle-side brackets. To finish the geometry you will also want Artec's frame-side TJ front coil buckets, plus control arms, coils, and a track bar suited to your build. Together they let the M210 run in the TJ's stock-style link-coil suspension.
Is this a bolt-on kit?
No. The brackets weld directly to the M210 housing, so this is a fabrication-level installation. Accurate bracket placement, pinion angle, and a competent welder are required for a safe, reliable result.
Multi-column
Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!
Financing Available
Buy now, pay later with PayPal Credit — available at checkout.
Contact Us
Have a question? Just send us an e-mail at support@nvmos.com
