50" LED Light Bar Hood Mounts for Jeep Wrangler JL and Gladiator JT
Warranty Information
Vendor warranty summary
Artec Industries Warranty
At a glance: Limited lifetime warranty against defects in material or workmanship
This is Artec Industries's warranty, not an NVMOS policy. We've summarized it in plain English to save you a search. The manufacturer's official terms always govern and can change without notice. Last reviewed on nvmos.com: October 4, 2026.
Coverage by product
| Product or component | Coverage |
|---|---|
| Artec Industries products | Limited lifetime, starting on delivery date |
| Returns of powder-coated products | Not returnable (manufacturer refund policy) |
What's covered
- Defects in material or workmanship for products bought, installed and used for their intended purpose
- Artec repairs or replaces a defective product at no charge (method at Artec's discretion)
What's not covered
- Misuse, abuse or neglect
- Improper installation
- Incorrect maintenance
How to make a Artec Industries warranty claim
- Call Artec at 855-278-3299 (Mon-Fri 9am-5pm MDT) to describe the issue
- Get an RMA number before shipping anything; packages without one are refused
Artec Industries contact: Phone: 855-278-3299 · Claim page / support
Bought it from NVMOS? Start with us.
Have your order number and a few photos of the issue ready, then call real humans at (920) 249-7744 or send us a message. We'll tell you whether the claim goes through us or straight to Artec Industries, and help it along either way.
Shop Artec Industries at NVMOS
Under Tailgate Plate - Aluminum, for Jeep Wrangler TJ/LJ 1997-2006
Coil Correction Plate for Jeep TJ Front Coil Springs (Pair)
Front and Rear Truss Package for Jeep Gladiator JT 2020+ (Free Front Axle Skid)
See all Artec Industries products, lead times and FAQs →
Disclaimer: The information on this page describes Artec Industries's own warranty policy. It is not a warranty offered by NVMOS (No Visible Means of Support LLC). Manufacturers update their terms at any time; we review these pages periodically, but the manufacturer's current official policy is the one that applies to your claim. Source: Artec Industries official warranty information. Last updated on nvmos.com: October 4, 2026. See our return policy for NVMOS's own terms.
About the brand
Artec Industries builds axle trusses, swap kits, suspension brackets and armor in North Salt Lake, Utah. NVMOS carries Artec reinforcements, control arms, skids, bumpers, fenders and battery mounts for Jeep, Toyota and Super Duty axles. It's for rigs running big tires and lockers that need housings and brackets that stay straight.
Based in: North Salt Lake, Utah · Made in: USA — most parts built in-house in Utah · Founded: 2003 · Lead time: Artec in-stock orders: 2–4 business days; NVMOS stock: 24–48 hours
Shop all 472 Artec IndustriesWarrantyAll brands
Warranty terms are set by Artec Industries, not NVMOS, and can change. Bought from us? Call (920) 249-7744 and we'll handle the claim with the brand.
These Artec Industries hood mounts put a full-size 50" LED light bar right at the hood line of a Jeep Wrangler JL or Gladiator JT, keeping the bar low, out of your sightline, and free of windshield-height wind noise. Each bracket is laser cut and CNC bent from 1/8" steel, engineered from 3D scan files of the JL front end, and bolts to factory locations with no drilling. If you want serious forward light without a roof rack or windshield brackets, this is the clean way to carry it.
Features
- Laser cut and CNC bent from 1/8" steel
- Direct bolt-in at factory mounting locations — no drilling, installs in minutes
- Positions a straight 50" bar at the hood line for a low-profile look
- Fits straight 50" bars with studded ends, including Rigid E-Series and SR-Series
- Mounting hardware and spacers included
- Lightly textured black powder coat finish
- Made in the USA
Fits the Jeep Wrangler JL 2018-up and Gladiator JT; Artec notes the Gladiator Mojave's taller hood may change the bolt length needed. Single-row bars like the Rigid SR-Series give the best clearance — dual-row bars fit with minimal clearance — and you should check your bar's mounting width against the dimension drawing before ordering. The light bar itself is sold separately. This mount also comes free in the JT Exterior Package; add LED bolt lights for rock lighting, or browse Jeep Wrangler parts and the full Artec Industries lineup.
Complete your Jeep Gladiator build
More parts that fit your Jeep Gladiator and pair well with this one — matched and ready to install.
$65.99
$131.99
$175.99
$153.99
$142.99
More for your Jeep Gladiator
Picked from the 764 parts we carry for the Jeep Gladiator. Check the years and trim in each title — or call us and we’ll confirm fit.
Specifications
50" LED Light Bar Hood Mounts for Jeep Wrangler JL and Gladiator JT FAQs
Which light bars fit these mounts?
Straight 50" LED bars with studded ends, such as the Rigid E-Series and SR-Series. Single-row bars are recommended for the best clearance; a dual-row bar fits with minimal clearance. Check your bar's exact mounting width against the dimension drawing before ordering — the light bar is sold separately.
Do I need to drill my Jeep to install them?
No. The brackets are engineered from 3D scan files to pick up factory mounting locations on the JL front end, and they bolt on with the included hardware and spacers. Most owners have them installed in minutes with basic hand tools.
Will they fit a Gladiator JT?
Yes, the mounts work on the Gladiator as well as the Wrangler JL 2018-up. One note from Artec: the Gladiator Mojave's taller hood height can affect the bolt length needed, so plan for that if you drive a Mojave.
Multi-column
Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!
Financing Available
Buy now, pay later with PayPal Credit — available at checkout.
Contact Us
Have a question? Just send us an e-mail at support@nvmos.com
