Jeep Grand Cherokee Steering System (1999-2004, WJ)
Warranty Information
Vendor warranty summary
Clayton Off Road Warranty
At a glance: Limited lifetime on control arms and track bars; 1 year on joints, bushings, springs, skids and brackets
This is Clayton Off Road's warranty, not an NVMOS policy. We've summarized it in plain English to save you a search. The manufacturer's official terms always govern and can change without notice. Last reviewed on nvmos.com: October 4, 2026.
Coverage by product
| Product or component | Coverage |
|---|---|
| Control arms and track bars (bending or breaking) | Limited lifetime (original buyer) |
| Johnny Joint bushings, GIRRO joints, washers, snap rings, rubber bushings | 1 year (workmanship defects) |
| Brake lines, coil springs, leaf springs | 1 year (workmanship defects) |
| Skid plates, mounting brackets, hardware | 1 year (workmanship defects) |
| Non-Clayton products sold by Clayton | That maker's warranty |
- Original purchaser only — coverage does not transfer if you sell it.
What's covered
- Control arms and track bars that bend or break from a manufacturing defect
- Workmanship defects on wear and other components for 1 year from purchase
What's not covered
- Minor finish flaws on powder-coated or plated parts from shipping
- Labor, towing, shipping, taxes, loss of use or revenue
- Abuse, accidents, alteration, modification, tampering, neglect or misuse
- Improper installation
- Sanctioned racing use
- Damage from loose or poorly maintained jam nuts (treated as neglect)
- Any item modified in any way
How to make a Clayton Off Road warranty claim
- Contact Clayton Off Road to get an RGA (return goods authorization) number
- Ship the part back at your cost, insured; C.O.D. packages are refused
- Pay shipping on the replacement part as well
- For non-Clayton parts, contact that manufacturer directly
Clayton Off Road contact: Phone: (203) 691-8593 · Email: customerservice@claytonoffroad.com · Claim page / support
Bought it from NVMOS? Start with us.
Have your order number and a few photos of the issue ready, then call real humans at (920) 249-7744 or send us a message. We'll tell you whether the claim goes through us or straight to Clayton Off Road, and help it along either way.
Shop Clayton Off Road at NVMOS
![Jeep Wrangler Engine Skid Plate (1996-2006, TJ/LJ) [6 Cyl ONLY]](https://cdn.shopify.com/s/files/1/0861/5113/5535/files/4100900.jpg?v=1776202964&width=400)
Jeep Wrangler Engine Skid Plate (1996-2006, TJ/LJ) [6 Cyl ONLY]
Jeep OVERLAND+ Short Rear Upper Control Arms (1993-2006, TJ/LJ/ZJ)
Jeep Wrangler Adjustable Front Sway Bar End Links (2018+, JL/JT)
See all Clayton Off Road products, lead times and FAQs →
Disclaimer: The information on this page describes Clayton Off Road's own warranty policy. It is not a warranty offered by NVMOS (No Visible Means of Support LLC). Manufacturers update their terms at any time; we review these pages periodically, but the manufacturer's current official policy is the one that applies to your claim. Source: Clayton Off Road official warranty information. Last updated on nvmos.com: October 4, 2026. See our return policy for NVMOS's own terms.
About the brand
Clayton Off Road builds Jeep suspension in the USA and ships it from Hamden, Connecticut. NVMOS carries Clayton lift kits, control arms, adjustable track bars, Johnny Joints, 4-link trusses and skid plates for Wrangler TJ/LJ, JK, JL and Gladiator JT. It's for Jeeps that commute all week and crawl on weekends.
Based in: Hamden, Connecticut · Made in: USA · Founded: 2001 · Lead time: Clayton in-stock: 1–3 business days; NVMOS stock: 24–48 hours
Shop all 511 Clayton Off RoadWarrantyAll brands
Warranty terms are set by Clayton Off Road, not NVMOS, and can change. Bought from us? Call (920) 249-7744 and we'll handle the claim with the brand.
Our Jeep Grand Cherokee WJ, 1999-2004 complete steering has both strength and simplicity in mind.
The strength comes from the 1 3/8s SOLID 7075-T651 Aluminum bar which we drill and tap for OE style end links. This is used for both the drag link, and the tie rod. An upgraded tie rod steering stabilizer mount is included which allows you to upgrade to a recommended Fox or Bilstein steering stabilizer.
Simplicity is achieved by making this a 100% bolt in system. Just unbolt your factory tie rod and drag link, assemble your new links, and bolt our heavy duty aluminum version in. No drilling, cutting or welding is required.
If you already upgraded your end links, check out our Jeep Grand Cherokee WJ Steering Upgrade Kit. This provides the aluminum tie rod, drag link, jam nuts, stabilizer mount and allows you to reuse your end links. Only need the drag link? See the WJ Drag Link System.
- EASY DIRECT BOLT IN SETUP
- Complete Bolt in Drag Link
- Complete Bolt In Tie Rod
- Steering Stabilizer Mount
- 7075-T651 Aluminum
- 1 3/8" Solid Round Rod
- OE WJ 24mm-1.5 Thread
- Left Hand/ Right Hand Threaded
- MADE IN THE USA!
NOTE: Stock steering stabilizer does NOT work with this system. See RELATED ITEMS tab for Bilstein of Fox options. Steering system can be used on both stock height and lifted Jeeps.
" 7075 aluminum alloy is an aluminum alloy, with zinc as the primary alloying element. It is strong, with a strength comparable to many steels, and has good fatigue strength and average machinability. " (Source: 7075 aluminium alloy on Wikipedia)
* Steering Tie Rod End at Pitman Arm (CRO-52088511) and Steering Tie Rod End at Right Knuckle (CRO-52088870AA) are Non Greasable.
Multi-column
Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!
Financing Available
Buy now, pay later with PayPal Credit — available at checkout.
Contact Us
Have a question? Just send us an e-mail at support@nvmos.com
